My 57 build (lots of pictures) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dennis57 · 05-23-2009, 10:28 PM

Quote:

Originally Posted by bensimmons_05

I'd like to see a picture of your lifting device in action. I might wanna make one like it.

Quote:

Originally Posted by Diesel

I second that. I'd like to see that in action too

Sorry guys, I missed your posts until tonight. When I get the cab back on it's floor I'll install it and take some pictures. It worked ok if I would of had a couple of people helping balance the cab. I built it to mount into the seat mounts but the balance was way off so I flipped it to mount on to the forward seat mounts and the beam was just forward of that. I am going to redo it to be more stable before I go to lift the cab with it again.

dennis57 · 05-29-2009, 05:04 PM

Quote:

Originally Posted by bensimmons_05

I'd like to see a picture of your lifting device in action. I might wanna make one like it.

Quote:

Originally Posted by Diesel

I second that. I'd like to see that in action too

Here is the rig. I moved the cab around today and used it again without modifying it. I had my wife stabilize the cab and it worked ok.

dennis57 · 05-29-2009, 08:58 PM

I got some accomplished to day before my fuggin welder blew up. It goes to the welder doctor on Monday.

Most of the welding is completed so I started grinding down the welds. I think it is coming out nice.

I found a screw up and I'm not sure if I should do anything about it or not. I didn't cut the return flanges off of the left step I replaced. Right now I'm thinking about just seam sealing it and leaving it.

nickp51chevy · 05-19-2009, 10:24 PM

I would have to say that I like the '57 best out of the rest of the TF's, mostly the grill. I can't wait to see the finished truck.

Daniel U · 05-20-2009, 11:25 AM

Are you going with TPI? I decided to do that on my '54 after learning about my '88 IROC's TPI.

dennis57 · 05-20-2009, 05:43 PM

Quote:

Originally Posted by Daniel U

Are you going with TPI? I decided to do that on my '54 after learning about my '88 IROC's TPI.

Yeah, I want to put it on top of a 350.

Daniel U · 05-20-2009, 06:02 PM

I drove 4 hours North and paid $500 for a 5.7 with a "complete" TPI system, that I found out after I got there, was missing the port matched plenum. Needless to say, my wife was upset. I'd say the TPI is well worth the $300.

Alhaxit · 05-20-2009, 06:54 PM

nice project dennis, dounds like what i was thinking for my project long time ago. good luck

dennis57 · 05-20-2009, 09:49 PM

I made some progress today. Fit the lower left rear door jam and the step/rocker. WOW they used to put stuff together well. I had a heck of a time getting the step out.

The lower forward door jam panel won't be here till Monday.

GRIMSS · 05-20-2009, 11:44 PM

Looking good. How was the fit of the panels?

57ToyBox · 05-21-2009, 07:39 AM

Awesome progress Dennis...
Nothing better than working with NEW replacement panels, instead of piecing together your own. Looks like they're going together nicely

my67chevytruck · 05-21-2009, 11:52 AM

looking good, keep at it.

Big Block · 05-21-2009, 04:34 PM

Nice looking project. I have my eye on a 58 Chevy sb/fleetside I want to buy as soon as I sell my Jimmy. Your picturs have inspired to buid an older truck.

dennis57 · 05-21-2009, 07:10 PM

Quote:

Originally Posted by Big Block

Nice looking project. I have my eye on a 58 Chevy sb/fleetside I want to buy as soon as I sell my Jimmy. Your picturs have inspired to buid an older truck.

Right on. I'm glad to have helped persuade you into building a 50 year old truck. So far this has been a fun project. Although the floor and door jam on the passenger side kicked my butt all day and its not fit yet.

Norselander · 05-22-2009, 05:52 PM

Good start! The nice thing about these trucks is that it's a relatively minor chore to fit wide tires out back -- cut the bedsides or go a step further and relocate the springs. There really isn't a need to cut the rails.

CAL 58 GMC · 05-24-2009, 12:35 AM

Nice job so far!

Kabwe · 05-24-2009, 12:57 AM

Looking good, keep up the good work.

dennis57 · 05-26-2009, 02:41 PM

Getting things done a little at a time. I'm kind of held up waiting for the lower door hinge attach panels. But I did manage to fit the rear right door jam and get both roughed in.

I also fit the right floor pan.

GRIMSS · 05-26-2009, 05:49 PM

A little at a time is better than it just sitting like mine.

bensimmons_05 · 05-27-2009, 08:26 AM

Quote:

Originally Posted by GRIMSS

A little at a time is better than it just sitting like mine.

...................

YUP!

dennis57 · 05-27-2009, 02:38 PM

I got a bit more done this morning. The lower forward door jam parts showed up yesterday so I could get back to doing something.

I got the right side roughed in and the hinge close out.

Moving on to the left side. I hope to have this finished by the end of next week and sitting on its floor so I can see how the door fit now and start on the dash.

nickp51chevy · 05-27-2009, 03:10 PM

Your moving along pretty quick

. From the looks of things you'll have it finished this year!

71'tahoe · 05-27-2009, 08:13 PM

Looking good...

57ToyBox · 05-27-2009, 08:34 PM

I'm luvin this !!!
Nice work

57ToyBox · 06-16-2009, 09:53 PM

Looking more and more like a solid brand new Cab.
Keep up the awesome work

05-29-2009, 08:58 PM	#3
dennis57 Registered User Join Date: May 2009 Location: Rio Rancho New Mexico Posts: 155	Re: My 57 build (lots of pictures) I got some accomplished to day before my fuggin welder blew up. It goes to the welder doctor on Monday. Most of the welding is completed so I started grinding down the welds. I think it is coming out nice. I found a screw up and I'm not sure if I should do anything about it or not. I didn't cut the return flanges off of the left step I replaced. Right now I'm thinking about just seam sealing it and leaving it.

05-19-2009, 10:24 PM	#4
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: My 57 build (lots of pictures) I would have to say that I like the '57 best out of the rest of the TF's, mostly the grill. I can't wait to see the finished truck. __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350

05-20-2009, 11:25 AM	#5
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: My 57 build (lots of pictures) Are you going with TPI? I decided to do that on my '54 after learning about my '88 IROC's TPI. __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

05-20-2009, 06:02 PM	#7
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: My 57 build (lots of pictures) I drove 4 hours North and paid $500 for a 5.7 with a "complete" TPI system, that I found out after I got there, was missing the port matched plenum. Needless to say, my wife was upset. I'd say the TPI is well worth the $300. __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

05-20-2009, 06:54 PM	#8
Alhaxit Registered User Join Date: Sep 2008 Location: Ca Posts: 9	Re: My 57 build (lots of pictures) nice project dennis, dounds like what i was thinking for my project long time ago. good luck Last edited by Alhaxit; 05-20-2009 at 06:57 PM. Reason: lack o reading

05-20-2009, 09:49 PM	#9
dennis57 Registered User Join Date: May 2009 Location: Rio Rancho New Mexico Posts: 155	Re: My 57 build (lots of pictures) I made some progress today. Fit the lower left rear door jam and the step/rocker. WOW they used to put stuff together well. I had a heck of a time getting the step out. The lower forward door jam panel won't be here till Monday.

05-20-2009, 11:44 PM	#10
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: My 57 build (lots of pictures) Looking good. How was the fit of the panels? __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

05-21-2009, 07:39 AM	#11
57ToyBox Registered User Join Date: Apr 2007 Location: Callander Ont. Posts: 387	Re: My 57 build (lots of pictures) Awesome progress Dennis... Nothing better than working with NEW replacement panels, instead of piecing together your own. Looks like they're going together nicely __________________ --Glenn-- http://67-72chevytrucks.com/vboard/s...d.php?t=345975 http://67-72chevytrucks.com/vboard/s...d.php?t=564403

05-21-2009, 11:52 AM	#12
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: My 57 build (lots of pictures) looking good, keep at it. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-21-2009, 04:34 PM	#13
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	Re: My 57 build (lots of pictures) Nice looking project. I have my eye on a 58 Chevy sb/fleetside I want to buy as soon as I sell my Jimmy. Your picturs have inspired to buid an older truck.

05-22-2009, 05:52 PM	#15
Norselander Clunker Farm, Proprietor Join Date: Oct 2003 Location: Coastal Northern California Posts: 124	Re: My 57 build (lots of pictures) Good start! The nice thing about these trucks is that it's a relatively minor chore to fit wide tires out back -- cut the bedsides or go a step further and relocate the springs. There really isn't a need to cut the rails. __________________ Drew Chief Junk Jockey

05-24-2009, 12:35 AM	#16
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: My 57 build (lots of pictures) Nice job so far! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

05-24-2009, 12:57 AM	#17
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: My 57 build (lots of pictures) Looking good, keep up the good work.

05-26-2009, 02:41 PM	#18
dennis57 Registered User Join Date: May 2009 Location: Rio Rancho New Mexico Posts: 155	Re: My 57 build (lots of pictures) Getting things done a little at a time. I'm kind of held up waiting for the lower door hinge attach panels. But I did manage to fit the rear right door jam and get both roughed in. I also fit the right floor pan.

05-26-2009, 05:49 PM	#19
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: My 57 build (lots of pictures) A little at a time is better than it just sitting like mine. __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared



Register or Log In To remove these advertisements.

05-27-2009, 02:38 PM	#21
dennis57 Registered User Join Date: May 2009 Location: Rio Rancho New Mexico Posts: 155	Re: My 57 build (lots of pictures) I got a bit more done this morning. The lower forward door jam parts showed up yesterday so I could get back to doing something. I got the right side roughed in and the hinge close out. Moving on to the left side. I hope to have this finished by the end of next week and sitting on its floor so I can see how the door fit now and start on the dash.

05-27-2009, 03:10 PM	#22
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: My 57 build (lots of pictures) Your moving along pretty quick . From the looks of things you'll have it finished this year! __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350

05-27-2009, 08:13 PM	#23
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: My 57 build (lots of pictures) Looking good...

05-27-2009, 08:34 PM	#24
57ToyBox Registered User Join Date: Apr 2007 Location: Callander Ont. Posts: 387	Re: My 57 build (lots of pictures) I'm luvin this !!! Nice work __________________ --Glenn-- http://67-72chevytrucks.com/vboard/s...d.php?t=345975 http://67-72chevytrucks.com/vboard/s...d.php?t=564403

06-16-2009, 09:53 PM	#25
57ToyBox Registered User Join Date: Apr 2007 Location: Callander Ont. Posts: 387	Re: My 57 build (lots of pictures) Looking more and more like a solid brand new Cab. Keep up the awesome work __________________ --Glenn-- http://67-72chevytrucks.com/vboard/s...d.php?t=345975 http://67-72chevytrucks.com/vboard/s...d.php?t=564403

Register or Log In To remove these advertisements.