Over 50 assorted parts + cab patch panels - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 05-25-2009, 08:23 PM

yes sir I am.. how much ya want for em..

**Hart_Rod** · 05-25-2009, 08:31 PM

Quote:

Originally Posted by FRENCHBLUE72

yes sir I am.. how much ya want for em..

Oh, I don't know...........your address will work........

. I'll put them in the mail tomorrow.

spudly · 05-26-2009, 12:31 AM

What about the rocker and cab corner from the passenger side?

**Hart_Rod** · 05-26-2009, 05:04 PM

Quote:

Originally Posted by spudly

What about the rocker and cab corner from the passenger side?

Spuds - they're not worth saving.

R/

ckexswb · 05-26-2009, 05:50 PM

jack parts in lot....

**Hart_Rod** · 05-26-2009, 06:57 PM

Quote:

Originally Posted by ckexswb

jack parts in lot....

These? $25 Shipped.

**Hart_Rod** · 06-02-2009, 01:52 AM

Any one else need any cab patch panels?

FRENCHBLUE72 · 06-03-2009, 09:55 AM

Rob just wanted to say thanks agian and gave ya some rep points...

terrellautosports · 06-03-2009, 01:11 PM

how much for this part? i know pic is small, sorry. it is the panel that has radio, ash tray and heater cut outs.
tried to pull it into paint, but no luck. if you can show me how you will be cutting it.

thanks

**Hart_Rod** · 06-04-2009, 11:15 AM

Quote:

Originally Posted by terrellautosports

how much for this part? i know pic is small, sorry. it is the panel that has radio, ash tray and heater cut outs.
tried to pull it into paint, but no luck. if you can show me how you will be cutting it.

thanks

I'll take pictures of where I will cut it. I'm still not sure if I want to sell it yet as I may need it for one of my trucks.

R

terrellautosports · 06-04-2009, 01:28 PM

Quote:

Originally Posted by hart_rod

i'll take pictures of where i will cut it. I'm still not sure if i want to sell it yet as i may need it for one of my trucks.

R

no problem. Just let me know.

**Hart_Rod** · 06-09-2009, 06:56 PM

Quote:

Originally Posted by terrellautosports

how much for this part? i know pic is small, sorry. it is the panel that has radio, ash tray and heater cut outs.
tried to pull it into paint, but no luck. if you can show me how you will be cutting it.

thanks

Here's a picture. $52.50 shipped. Let me know.

Blazin_72 · 06-09-2009, 07:59 PM

hey do you still have the passenger and driver floor panels and rocker panels?
if so how much shipped to 95118?

thanks,
jake

**Hart_Rod** · 06-09-2009, 08:27 PM

Quote:

Originally Posted by Blazin_72

hey do you still have the passenger and driver floor panels and rocker panels?
if so how much shipped to 95118?

thanks,
jake

Jake I have them, but I think I'm going to keep them until I figure out what I need for my crewcab. I'll let you know.

R/

Legolas894 · 06-29-2009, 08:04 PM

Quote:

Originally Posted by Hart_Rod

Here's a picture. $52.50 shipped. Let me know.

Did you sell this already?

**Hart_Rod** · 06-29-2009, 08:26 PM

Quote:

Originally Posted by Legolas894

Did you sell this already?

I still have it.

R/

**Hart_Rod** · 06-10-2009, 10:07 PM

Quote:

Originally Posted by fastcam1

if the cab is anywhere between 69-72 i would like to know how much for this piece of the firewall? thanksAttachment 465006

I'm going to cut it where this one is cut.

Quote:

Originally Posted by ckexswb

jack parts in lot....

Do you still want the jack parts?

Quote:

Originally Posted by terrellautosports

how much for this part? i know pic is small, sorry. it is the panel that has radio, ash tray and heater cut outs.
tried to pull it into paint, but no luck. if you can show me how you will be cutting it.

thanks

PM Sent

Quote:

Originally Posted by LooseCannon

I'm in need of a passenger and driver side upper windshield patch. About 8 inches down the windshield post, 8 inches along the door and windshield top.

I've got yours cut out. I'm just looking for a box.

Quote:

Originally Posted by C10Sim

What year is the drive shaft from and how much shipped to 77029

PM sent.

dfwright · 06-04-2009, 01:47 PM

Do you still have the spare tire mount and hardware? If so I am interested, just let me know how much shipped to 78163. I would need all the parts, as I have no spare tire mount in my truck at all. It was taken out to mount a hitch. I had a bed mount spare, but I'd really like to be able to put a spare under the bed.

Thanks!

**Hart_Rod** · 06-06-2009, 08:55 AM

Quote:

Originally Posted by dfwright

Do you still have the spare tire mount and hardware? If so I am interested, just let me know how much shipped to 78163. I would need all the parts, as I have no spare tire mount in my truck at all. It was taken out to mount a hitch. I had a bed mount spare, but I'd really like to be able to put a spare under the bed.

Thanks!

Spare tire carrier sold! Thanks dfwright, I'll ship it next week.

R/

Blazin_72 · 06-09-2009, 08:31 PM

ok thank you

**Hart_Rod** · 06-26-2009, 08:07 AM

bump

rodney fisher · 06-27-2009, 06:00 PM

Hey, do you have any cab supports or cab corners?

rodney fisher · 06-27-2009, 06:10 PM

I'm also needing the top right corner of the firewall, ill take a pic of the part that has cancer

Thanks,
Rodney

**Hart_Rod** · 07-01-2009, 12:10 AM

Quote:

Originally Posted by rodney fisher

I'm also needing the top right corner of the firewall, ill take a pic of the part that has cancer

Thanks,
Rodney

Rodney are you talking about this part circled in red?

johnechi · 07-06-2009, 10:16 AM

How much for the heater core and blower motor to 92392?

05-25-2009, 08:23 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Over 50 assorted parts + cab patch panels yes sir I am.. how much ya want for em.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-26-2009, 12:31 AM	#3
spudly Registered User Join Date: Dec 2007 Location: Newark, CA Posts: 127	Re: Over 50 assorted parts + cab patch panels What about the rocker and cab corner from the passenger side?

05-26-2009, 05:50 PM	#5
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: Over 50 assorted parts + cab patch panels jack parts in lot....

06-02-2009, 01:52 AM	#7
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: Over 50 assorted parts + cab patch panels Any one else need any cab patch panels? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-03-2009, 09:55 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Over 50 assorted parts + cab patch panels Rob just wanted to say thanks agian and gave ya some rep points... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-03-2009, 01:11 PM	#9
terrellautosports New Member Join Date: Feb 2007 Location: s.w. missouri Posts: 176	Re: Over 50 assorted parts + cab patch panels how much for this part? i know pic is small, sorry. it is the panel that has radio, ash tray and heater cut outs. tried to pull it into paint, but no luck. if you can show me how you will be cutting it. thanks Attached Images __________________ 1968 SWB Project. Soon to Start Build Thread

06-09-2009, 07:59 PM	#13
Blazin_72 Registered User Join Date: Jun 2009 Location: San jose ca Posts: 4	Re: Over 50 assorted parts + cab patch panels hey do you still have the passenger and driver floor panels and rocker panels? if so how much shipped to 95118? thanks, jake

06-04-2009, 01:47 PM	#18
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: Over 50 assorted parts + cab patch panels Do you still have the spare tire mount and hardware? If so I am interested, just let me know how much shipped to 78163. I would need all the parts, as I have no spare tire mount in my truck at all. It was taken out to mount a hitch. I had a bed mount spare, but I'd really like to be able to put a spare under the bed. Thanks! __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

06-09-2009, 08:31 PM	#20
Blazin_72 Registered User Join Date: Jun 2009 Location: San jose ca Posts: 4	Re: Over 50 assorted parts + cab patch panels ok thank you

06-26-2009, 08:07 AM	#21
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: Over 50 assorted parts + cab patch panels bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-27-2009, 06:00 PM	#22
rodney fisher Registered User Join Date: Jun 2009 Location: Muscle Shoals, Alabama Posts: 29	Re: Over 50 assorted parts + cab patch panels Hey, do you have any cab supports or cab corners?

06-27-2009, 06:10 PM	#23
rodney fisher Registered User Join Date: Jun 2009 Location: Muscle Shoals, Alabama Posts: 29	Re: Over 50 assorted parts + cab patch panels I'm also needing the top right corner of the firewall, ill take a pic of the part that has cancer Thanks, Rodney

07-06-2009, 10:16 AM	#25
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: Over 50 assorted parts + cab patch panels How much for the heater core and blower motor to 92392?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.