how about some laid out longbeds - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texastrendz · 05-17-2010, 09:04 PM

yes, i work on heavy equipment and that is the hydraulic hose we use, it is made by parker, i use 37 degree jic fittings on all of it.
The panard bar is actually a ece super trac bar that i had and cut it down, i cut it to length, made a center sleeve. plug welded and then seam welded. it is about as long as an airide tech bar.

86er · 05-18-2010, 10:30 PM

Quote:

Originally Posted by NZSquare

Love the pics, especially the red one, I saw a pic of it on here last year and it was just the kick in the backside I needed to get moving on mine. Super clean.

Heres mine, again not quite laid out, its sitting on bumpstops though. Its about to get 20" steelies and a chopped front crossmember, so then she'll be down good and hard.

The whitewalls are painted on, the back one looks humped as I had the exhaust dumping in front of it.

I got bored this weekend,so i painted my truck...... i still need to do the body work.. I need to get some white walls, I like the way your trucks looks..

NZSquare · 05-19-2010, 04:36 PM

Well Dang I like that one, for obvious reasons, like brothers from other mothers.

I had looked at getting real deal whitewalls but they are just too pricey only to kerb one and ruin it. The whitewall paint seems to be ok, its a rubber based emulsion that etches into the tyre once you remove the outer skin (not a whole layer of rubber) from the tyre, we have a guy locally that does it for 20 bucks a tyre.

frisco kid · 05-19-2010, 05:03 PM

Quote:

Originally Posted by brian69longbed

everyone has a laid out shortbed. lets see some longbeds!
here is mine in progress
looks much different now but you get the idea
POST YOUR LONGBED PICTURES!!
Attachment 514864

did any one use thorbecke super lift wisebone,for 63/ 73 c 10 and if so can i see some pic of your build or just the finished truck and does it lay frame with out any more mods thanks, nice trucks by the way

Wasted Income · 05-19-2010, 05:44 PM

This is as low as my LWB goes....not very low, but it sure is fast

**scotts62** · 05-19-2010, 05:45 PM

^^ Very cool, do you have a build thread?

Wasted Income · 05-19-2010, 05:51 PM

I honestly don't know...lol. I only get on here once in awhile. PM me if you have any specific questions.

c10Mang · 05-19-2010, 09:33 PM

here is mine

86er · 05-19-2010, 10:33 PM

Quote:

Originally Posted by NZSquare

Well Dang I like that one, for obvious reasons, like brothers from other mothers.

I had looked at getting real deal whitewalls but they are just too pricey only to kerb one and ruin it. The whitewall paint seems to be ok, its a rubber based emulsion that etches into the tyre once you remove the outer skin (not a whole layer of rubber) from the tyre, we have a guy locally that does it for 20 bucks a tyre.

Nice.... I got a guy keepin his eye on some at a dealership that he works at for some use ones...i would like to do some sort of body drop- Z the frame,, this winter.

86er · 05-19-2010, 10:35 PM

Quote:

Originally Posted by c10Mang

here is mine

very cool............

**kev2809** · 05-19-2010, 10:40 PM

wow that thing is low c10mang. whats the setup?

chevydog66 · 05-19-2010, 10:56 PM

Updated pics of mine. Same stance just better camera.

c10Mang · 05-20-2010, 01:14 AM

Quote:

Originally Posted by kev2809

wow that thing is low c10mang. whats the setup?

I have a c4 dropmember in front, step notch in back. It took a lot of work getting that low

Impalapawpaw · 05-20-2010, 09:35 AM

Quote:

Originally Posted by c10Mang

here is mine

YES love this truck.What set up are you running ..

Hottrucks · 05-20-2010, 10:06 AM

C dog How the hell did you get the exhaust out the back??

royo · 05-20-2010, 03:46 PM

Quote:

Originally Posted by Wasted Income

This is as low as my LWB goes....not very low, but it sure is fast

Oh lordy lordy Sweeeeeeeeeeeeeeeeeeet

Hottrucks · 05-20-2010, 05:09 PM

hey income...whats dragging under the back of it

Wasted Income · 05-21-2010, 12:34 PM

Quote:

Originally Posted by Hottrucks

hey income...whats dragging under the back of it

That's just the rear air lines, had them tucked up in the back temporarily...pics were after it rolled out of the garage for the first time on air.

Impalapawpaw · 05-23-2010, 05:20 PM

got my bed on today so i thought i would post up my long bed ..

[IMG]

[/IMG]

c10Mang · 05-23-2010, 05:24 PM

^^ Sick!!, Have any pix of inside the bed?

Impalapawpaw · 05-24-2010, 02:48 PM

Quote:

Originally Posted by c10Mang

^^ Sick!!, Have any pix of inside the bed?

YEP

[IMG]

[/IMG]

panhandler62 · 05-24-2010, 03:28 PM

This is exactly "laid out" (or even close to done) but she's gonna ride a whole lot lower than she did when I got her.

That's roughly ride height in back. It will drop about 3 more inches dumped.

The front is sitting about 5 inches higher than it will when I get it put back together. Couldn't drop it any more in front cause that's all the shorter my jack stands get. lol

chevydog66 · 05-24-2010, 06:08 PM

Quote:

Originally Posted by Hottrucks

C dog How the hell did you get the exhaust out the back??

Exhaust world Fort Wayne, In. He ovaled the pipe so that it fits between bottom of bed and rearend. 2 1/2" pipe too. I have a c notch.

Hottrucks · 05-24-2010, 06:30 PM

Any chance I can get a pic of that set up??? I need to have a system built after I do the caddy transplant I want to get it out the back too!!..just please say its between the frame with my pro streets theres no room outside the frame

chevydog66 · 05-24-2010, 08:37 PM

Quote:

Originally Posted by Hottrucks

Any chance I can get a pic of that set up??? I need to have a system built after I do the caddy transplant I want to get it out the back too!!..just please say its between the frame with my pro streets theres no room outside the frame

Outside the frame rail. I have the tank under the bed, no room there. Flowmasters and air tanks are under bed in front of rear tire.

05-17-2010, 09:04 PM	#26
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: how about some laid out longbeds yes, i work on heavy equipment and that is the hydraulic hose we use, it is made by parker, i use 37 degree jic fittings on all of it. The panard bar is actually a ece super trac bar that i had and cut it down, i cut it to length, made a center sleeve. plug welded and then seam welded. it is about as long as an airide tech bar.

05-19-2010, 04:36 PM	#28
NZSquare Registered User Join Date: Oct 2008 Location: Queenstown Posts: 132	Re: how about some laid out longbeds Well Dang I like that one, for obvious reasons, like brothers from other mothers. I had looked at getting real deal whitewalls but they are just too pricey only to kerb one and ruin it. The whitewall paint seems to be ok, its a rubber based emulsion that etches into the tyre once you remove the outer skin (not a whole layer of rubber) from the tyre, we have a guy locally that does it for 20 bucks a tyre.

05-19-2010, 05:44 PM	#30
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: how about some laid out longbeds This is as low as my LWB goes....not very low, but it sure is fast __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

05-19-2010, 05:45 PM	#31
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: how about some laid out longbeds ^^ Very cool, do you have a build thread? __________________ Scott 93 crew cab build Project 62

05-19-2010, 05:51 PM	#32
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: how about some laid out longbeds I honestly don't know...lol. I only get on here once in awhile. PM me if you have any specific questions. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

05-19-2010, 09:33 PM	#33
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: how about some laid out longbeds here is mine Attached Images

05-19-2010, 10:40 PM	#36
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,182	Re: how about some laid out longbeds wow that thing is low c10mang. whats the setup? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-19-2010, 10:56 PM	#37
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: how about some laid out longbeds Updated pics of mine. Same stance just better camera. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

05-20-2010, 10:06 AM	#40
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: how about some laid out longbeds C dog How the hell did you get the exhaust out the back?? __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

05-20-2010, 05:09 PM	#42
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: how about some laid out longbeds hey income...whats dragging under the back of it __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

05-23-2010, 05:20 PM	#44
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: how about some laid out longbeds got my bed on today so i thought i would post up my long bed .. [IMG][/IMG]

05-23-2010, 05:24 PM	#45
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: how about some laid out longbeds ^^ Sick!!, Have any pix of inside the bed? Last edited by c10Mang; 05-23-2010 at 05:25 PM.

05-24-2010, 03:28 PM	#47
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,763	Re: how about some laid out longbeds This is exactly "laid out" (or even close to done) but she's gonna ride a whole lot lower than she did when I got her. That's roughly ride height in back. It will drop about 3 more inches dumped. The front is sitting about 5 inches higher than it will when I get it put back together. Couldn't drop it any more in front cause that's all the shorter my jack stands get. lol Attached Images __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

05-24-2010, 06:30 PM	#49
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: how about some laid out longbeds Any chance I can get a pic of that set up??? I need to have a system built after I do the caddy transplant I want to get it out the back too!!..just please say its between the frame with my pro streets theres no room outside the frame



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.