CA Parting Out 80 GMC 15 SB 2WD* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

benoit454 · 11-24-2009, 04:05 PM

ok let me know on a price shipped also.

benoit454 · 11-24-2009, 08:04 PM

also just let me know if it's the switch that's on the controls, might just do without it if you want to sell it cheaper without controls or if it's not gonna make a difference anyways in price, send it and I'll either keep or scrap.

My F4i · 11-24-2009, 10:25 PM

Do you still have the brake components? and if so what parts and how many lugs is it, thank you

Eighty-6 · 11-24-2009, 11:29 PM

Quote:

Originally Posted by KrazyRay

There is only the left side mirror. It is in good condition with light to medium pitting $20 shipped.

Thanks but I'm looking for a pair. I'll pass for now but if you ever come across a pair in good condition please keep me in mind.

KrazyRay · 11-25-2009, 01:45 AM

Quote:

Originally Posted by benoit454

also just let me know if it's the switch that's on the controls, might just do without it if you want to sell it cheaper without controls or if it's not gonna make a difference anyways in price, send it and I'll either keep or scrap.

The heater boxes with broken control switch would be $35 and the shipping to 25601 is $32 for a total of $67 shipped. This does not include the ducting and the heater blower motor. Thanks, Ray

KrazyRay · 11-25-2009, 01:47 AM

Quote:

Originally Posted by My F4i

Do you still have the brake components? and if so what parts and how many lugs is it, thank you

Yes. Its 5 lug disc on front and drum on rear.

ECU PIRATE · 11-25-2009, 10:03 AM

Quote:

Originally Posted by KrazyRay

Mike, no problem on the upper and lower push rods, z bars, etc. I just want to make sure you get everything you need to make it happen. Price is still $60 shipped. Thanks, Ray

Thanks KrazyRay. PM sent

benoit454 · 11-25-2009, 11:19 AM

ok I guess I'd have to pass, the main things I need is the box and blower motor. I can wire it to a kill switch and ducting isn't needed either. I was also gonna replace the core and hoses anyways.

KrazyRay · 11-25-2009, 03:54 PM

Quote:

Originally Posted by benoit454

ok I guess I'd have to pass, the main things I need is the box and blower motor. I can wire it to a kill switch and ducting isn't needed either. I was also gonna replace the core and hoses anyways.

Chris, If Mr79C10 passes on the blower motor, I will throw that in at no extra charge. The switch is good, it was detached from the control. I'm sorry about the shipping...the box is very bulky. Thanks, Ray

KrazyRay · 11-25-2009, 04:00 PM

headlight switch, wiper switch $5 each plus shipping
pics of harness

bigblock73 · 11-25-2009, 04:45 PM

OK Ray, looks good...I still want the fuseblock and interior harness as mentioned previously. Please let me know how you would like payment. Thanks again!

KrazyRay · 11-25-2009, 05:09 PM

Quote:

Originally Posted by bigblock73

OK Ray, looks good...I still want the fuseblock and interior harness as mentioned previously. Please let me know how you would like payment. Thanks again!

pm sent

benoit454 · 11-25-2009, 07:21 PM

no prob. ray I knew shipping wouldn't be too cheap.

So just let me know on the blower motor, and I'll see what I can do.

ECU PIRATE · 11-25-2009, 10:46 PM

Quote:

Originally Posted by KrazyRay

Jeff, The wiring is spliced at the radio and they put in a kill switch under the dash, on the outside, there are some wires fried above the brake m/c. The wires going out to the core support look good. Thanks, Ray

Ray.......How much for the little diamond shaped wire junction plate left of the M/C? Is it in good shape?

Thanks,

Mike

KrazyRay · 11-26-2009, 02:49 AM

Quote:

Originally Posted by benoit454

no prob. ray I knew shipping wouldn't be too cheap.

So just let me know on the blower motor, and I'll see what I can do.

I have a 79 Chevy Bonanza with AC. I think the blower motor is the same. If it is, I will let you know. Thanks, Ray

KrazyRay · 11-26-2009, 02:54 AM

Quote:

Originally Posted by ECU PIRATE

Ray.......How much for the little diamond shaped wire junction plate left of the M/C? Is it in good shape?

Thanks,

Mike

Mike, the wires had a meltdown at that plate. I'll try to remember to throw it in with your clutch stuff free. Thanks, Ray

benoit454 · 11-27-2009, 12:52 PM

no prob. just let me know what ya find out about it.

KrazyRay · 11-27-2009, 04:44 PM

Quote:

Originally Posted by benoit454

no prob. just let me know what ya find out about it.

The blower motors are the same. It looks like I have the parts you want. Let me know and I will get them pulled right away. Thanks, Ray

benoit454 · 11-27-2009, 09:51 PM

ok thanks, have to wait for the cash though, soon as I get it I'll let ya know, or if I have to pass, I'll let you know asap.

bigblock73 · 11-27-2009, 11:52 PM

PAYPAL payment sent for the harness Ray, thanks again.

KQQL IT · 11-28-2009, 05:42 AM

power steering or manual? If manual how much for the box

KrazyRay · 11-28-2009, 11:07 AM

Quote:

Originally Posted by KQQL IT

power steering or manual? If manual how much for the box

Its a manual. I can do $30 shipped or $20 if you are close enough to pick it up. Thanks, Ray

KQQL IT · 11-28-2009, 04:46 PM

PM sent

KrazyRay · 11-29-2009, 11:13 PM

Here's some more parts from this truck:
cab mount frame brackets $20 shipped
cab mounts (6) $25 shipped
6 cylinder air cleaner-rust free $20 plus shipping
gas tank brackets (4) enough for 2 tanks-rust free $60 shipped
spare tire carrier-rust free $10 plus shipping
carb $30 shipped
heat shield under driver-rust free $20 plus shipping
front bumper brackets $15 plus shipping
The truck carcass is going to scrap soon...let me know if you need any parts off this. Thanks, Ray

KrazyRay · 11-29-2009, 11:19 PM

Also, fan with newer clutch $15 plus shipping

11-24-2009, 04:05 PM	#26
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting Out 80 GMC 15 SB 2WD* ok let me know on a price shipped also. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

11-24-2009, 08:04 PM	#27
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting Out 80 GMC 15 SB 2WD* also just let me know if it's the switch that's on the controls, might just do without it if you want to sell it cheaper without controls or if it's not gonna make a difference anyways in price, send it and I'll either keep or scrap. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

11-24-2009, 10:25 PM	#28
My F4i Registered User Join Date: May 2009 Location: Texas Posts: 28	Re: Parting Out 80 GMC 15 SB 2WD* Do you still have the brake components? and if so what parts and how many lugs is it, thank you

11-25-2009, 11:19 AM	#33
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting Out 80 GMC 15 SB 2WD* ok I guess I'd have to pass, the main things I need is the box and blower motor. I can wire it to a kill switch and ducting isn't needed either. I was also gonna replace the core and hoses anyways. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

11-25-2009, 04:00 PM	#35
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 80 GMC 15 SB 2WD* headlight switch, wiper switch $5 each plus shipping pics of harness Attached Images

11-25-2009, 04:45 PM	#36
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting Out 80 GMC 15 SB 2WD* OK Ray, looks good...I still want the fuseblock and interior harness as mentioned previously. Please let me know how you would like payment. Thanks again! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 11-25-2009 at 04:45 PM.

11-25-2009, 07:21 PM	#38
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting Out 80 GMC 15 SB 2WD* no prob. ray I knew shipping wouldn't be too cheap. So just let me know on the blower motor, and I'll see what I can do. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

11-27-2009, 12:52 PM	#42
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting Out 80 GMC 15 SB 2WD* no prob. just let me know what ya find out about it. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

11-27-2009, 09:51 PM	#44
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting Out 80 GMC 15 SB 2WD* ok thanks, have to wait for the cash though, soon as I get it I'll let ya know, or if I have to pass, I'll let you know asap. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

11-27-2009, 11:52 PM	#45
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting Out 80 GMC 15 SB 2WD* PAYPAL payment sent for the harness Ray, thanks again. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

11-28-2009, 05:42 AM	#46
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,273	Re: Parting Out 80 GMC 15 SB 2WD* power steering or manual? If manual how much for the box __________________ " That didnt make it any newer " " Dont antique the equipment "

11-28-2009, 04:46 PM	#48
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,273	Re: Parting Out 80 GMC 15 SB 2WD* PM sent __________________ " That didnt make it any newer " " Dont antique the equipment "

11-29-2009, 11:13 PM	#49
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 80 GMC 15 SB 2WD* Here's some more parts from this truck: cab mount frame brackets $20 shipped cab mounts (6) $25 shipped 6 cylinder air cleaner-rust free $20 plus shipping gas tank brackets (4) enough for 2 tanks-rust free $60 shipped spare tire carrier-rust free $10 plus shipping carb $30 shipped heat shield under driver-rust free $20 plus shipping front bumper brackets $15 plus shipping The truck carcass is going to scrap soon...let me know if you need any parts off this. Thanks, Ray Attached Images Last edited by KrazyRay; 11-29-2009 at 11:22 PM.

11-29-2009, 11:19 PM	#50
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 80 GMC 15 SB 2WD* Also, fan with newer clutch $15 plus shipping Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.