What have you done to your 67-72 Chevrolet/GMC - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SS68 · 11-30-2009, 09:30 PM

today i replaced the heater core after work had to take the hood off and fixed another problem with the hood while it was off whenever i hit a bump the hood would pop open problem fixed now

now my feat are toasty again

flashed · 11-30-2009, 11:45 PM

I drove it to work today. When I got home I started sanding on the front bumper. Hopefully I will get the bumper painted white and reinstalled by this weekend.

dfwright · 11-30-2009, 11:51 PM

I sandblasted the rear shock mounts today.

**Dieselwrencher** · 11-30-2009, 11:51 PM

Today I put more parts in the cab of mine.

dfwright · 11-30-2009, 11:58 PM

Double post...

white 67 · 12-01-2009, 12:04 AM

Today I put my feet up on a tire and put beer cans on the frame while i watched tv in the garage.

67ChevyRedneck · 12-01-2009, 12:49 AM

Opened the garage door and looked at it, then the cold blast of air hit me, and I went back inside and watched The Saints whoop the Patriots.

I hate winter. I hate cold weather. If it's below 70 it's too cold out.

fatboy7079 · 12-01-2009, 01:52 AM

backed it out the garage. Then got on top of my rust free cab in the corner of the garage. Droped the x-mas tree on said rust free cab/ladder. MERRY X-mas to me a dent

dan42 · 12-01-2009, 02:00 AM

Gave it a pat on the hood - I'm driving the '70 while I'm redoing the bedwood in my '67. It's sitting in the garage waiting patiently for me to get to it.

1968CHEVYC10 · 12-01-2009, 02:07 AM

just looked at it, then worked on bending and shaping new brake lines till I broke the flare kit, then off to ebay to find a good one. moral of the day... don't buy cheap tools.

mclairmo · 12-01-2009, 02:13 AM

Got a used dash/guage cluster in the mail today and opened the box. It was dirty as heck but looks ok. Was only $15 on Ebay including shipping. Gonna sell my speed warning/tach dash and install this cheapy one in its place. I don't need speed warning or a tach. It's a truck.

cppursell · 12-01-2009, 02:28 AM

I took out my instrument panel out of my '67 to see if I could swap with a '69 inst. panel with gauges. That was a no go, the wiring on the printed circuit is different, and I think it'd be too much trouble to try and re-wire it. Right now my panel is drying in the garage after a chrome spray-paint job!

coolbus4us · 12-01-2009, 04:04 AM

I built a sub enclosure for it today, then took the family out to dinner. We get thumbs up everywhere we go in the Burb.

bill c · 12-01-2009, 04:28 AM

i looked at it, saw what i have got done and what i need to do. got nothing done today.

petey-pablo · 12-01-2009, 04:52 AM

I changed my tranny oil and filter installed new Milodon Braided Stainless Steel, Transmission Dipstick,yesterday and today monday I added oil to the tranny tried to start my truck and it wouldn't start I have timming issues So I gave up after the third attempt and started to clean up the garage alittle tomorrow is another day......

**Already Gone** · 12-01-2009, 05:00 AM

Mine is in storage for the Winter but like any other day today I thought about next spring and how I'm going to install the parts I've been gathering. I have an ECE rear gas tank to go in as well as integrated shoulder seat belt seats from a 2003 Chev truck. I want to yank the gas tank from the cab before I install the seats and that means I need to install the rear gas tank. If I take the box off the truck to install the rear tank I might as well redo the wood floor as well. Where does it end, or does it ?

fdbdw · 12-01-2009, 09:20 AM

smoked the tires for the first time, 3/4 throttle, after about the 5th time Ive recalibrated the carb, lliving at 6000' elevation sucks but I think Im getting close to having it dialed in

independentcustoms · 12-01-2009, 10:39 AM

Yesterday I drove it to the gym, helped my girl move some stuff for her work, then drove it to the shop to install and rewire a blower motor. Today I'll drive it through the snow to the gym and then off to court.

marcsRX · 12-01-2009, 11:23 AM

Ordered a set of these...

http://www.summitracing.com/parts/SU...9/?image=large

marcsRX · 12-01-2009, 11:24 AM

I need a garage heater, or else this project is going to get frozen in its tracks. Freakin cold in Chicago, and its only going to get worse.

**americanmusc1e** · 12-01-2009, 12:04 PM

drove it to college in the rain.................left some more black marks

gonna put in a new thermostat, and hook up the heater

dnd1978 · 12-01-2009, 12:16 PM

Today im at work but yesterday I put her on the road for the first time with the new 383 stroker. I think i like it. No I LOVE IT!

YouTube- 1972 C10 with 383 stroker

BAGNDRAGIT · 12-01-2009, 12:23 PM

went outside and looked at it. still waiting for 3-jaw puller in the mail so i can change timing set. probably will poke around today. maybe finish the passenger side airbag system...

chevellelover · 12-01-2009, 12:39 PM

yesterday i put new tires on it and cut my exhaust tips

**Roland** · 12-01-2009, 12:42 PM

Smeared some paint remover on the top of the cab and on the firewall. Recieved new cab corners and rockers from Classic Muscle.

11-30-2009, 09:30 PM	#26
SS68 Registered User Join Date: Apr 2008 Location: Dallas, TX Posts: 126	Re: What have you done to your 67-72 Chevrolet/GMC today i replaced the heater core after work had to take the hood off and fixed another problem with the hood while it was off whenever i hit a bump the hood would pop open problem fixed now now my feat are toasty again

11-30-2009, 11:45 PM	#27
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: What have you done to your 67-72 Chevrolet/GMC I drove it to work today. When I got home I started sanding on the front bumper. Hopefully I will get the bumper painted white and reinstalled by this weekend.

11-30-2009, 11:51 PM	#28
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: What have you done to your 67-72 Chevrolet/GMC I sandblasted the rear shock mounts today. Attached Images __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

11-30-2009, 11:51 PM	#29
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: What have you done to your 67-72 Chevrolet/GMC Today I put more parts in the cab of mine. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-30-2009, 11:58 PM	#30
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: What have you done to your 67-72 Chevrolet/GMC Double post... __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017 Last edited by dfwright; 11-30-2009 at 11:59 PM.

12-01-2009, 12:04 AM	#31
white 67 Registered User Join Date: Oct 2009 Location: coupeville ,washington Posts: 348	Re: What have you done to your 67-72 Chevrolet/GMC Today I put my feet up on a tire and put beer cans on the frame while i watched tv in the garage.

12-01-2009, 12:49 AM	#32
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What have you done to your 67-72 Chevrolet/GMC Opened the garage door and looked at it, then the cold blast of air hit me, and I went back inside and watched The Saints whoop the Patriots. I hate winter. I hate cold weather. If it's below 70 it's too cold out. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 12-01-2009 at 12:50 AM.

12-01-2009, 01:52 AM	#33
fatboy7079 Registered User Join Date: Nov 2009 Location: indianapolis, Indiana Posts: 7	Re: What have you done to your 67-72 Chevrolet/GMC backed it out the garage. Then got on top of my rust free cab in the corner of the garage. Droped the x-mas tree on said rust free cab/ladder. MERRY X-mas to me a dent __________________ 70 charger r/t 440 67 chevy short bed step side 93 454ss

12-01-2009, 02:00 AM	#34
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: What have you done to your 67-72 Chevrolet/GMC Gave it a pat on the hood - I'm driving the '70 while I'm redoing the bedwood in my '67. It's sitting in the garage waiting patiently for me to get to it. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

12-01-2009, 02:07 AM	#35
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: What have you done to your 67-72 Chevrolet/GMC just looked at it, then worked on bending and shaping new brake lines till I broke the flare kit, then off to ebay to find a good one. moral of the day... don't buy cheap tools. __________________ '68 C10 LWB 6.2NA/NP833 3.73's

12-01-2009, 02:13 AM	#36
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: What have you done to your 67-72 Chevrolet/GMC Got a used dash/guage cluster in the mail today and opened the box. It was dirty as heck but looks ok. Was only $15 on Ebay including shipping. Gonna sell my speed warning/tach dash and install this cheapy one in its place. I don't need speed warning or a tach. It's a truck. Last edited by mclairmo; 12-01-2009 at 02:16 AM.

12-01-2009, 02:28 AM	#37
cppursell Registered User Join Date: Dec 2008 Location: San Francisco, CA Posts: 144	Re: What have you done to your 67-72 Chevrolet/GMC I took out my instrument panel out of my '67 to see if I could swap with a '69 inst. panel with gauges. That was a no go, the wiring on the printed circuit is different, and I think it'd be too much trouble to try and re-wire it. Right now my panel is drying in the garage after a chrome spray-paint job!

12-01-2009, 04:04 AM	#38
coolbus4us cuts corners Join Date: Jan 2009 Location: Riverside, CA Posts: 246	Re: What have you done to your 67-72 Chevrolet/GMC I built a sub enclosure for it today, then took the family out to dinner. We get thumbs up everywhere we go in the Burb. __________________ '68 Suburban named the "Cool Bus" by my kids Follow the project here: http://67-72chevytrucks.com/vboard/s...d.php?t=331448 I love my Suburban.....a lot!

12-01-2009, 04:28 AM	#39
bill c Registered User Join Date: Aug 2009 Location: shingle springs, ca Posts: 57	Re: What have you done to your 67-72 Chevrolet/GMC i looked at it, saw what i have got done and what i need to do. got nothing done today. Attached Images

12-01-2009, 04:52 AM	#40
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: What have you done to your 67-72 Chevrolet/GMC I changed my tranny oil and filter installed new Milodon Braided Stainless Steel, Transmission Dipstick,yesterday and today monday I added oil to the tranny tried to start my truck and it wouldn't start I have timming issues So I gave up after the third attempt and started to clean up the garage alittle tomorrow is another day...... __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net



Register or Log In To remove these advertisements.

12-01-2009, 05:00 AM	#41
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,150	Re: What have you done to your 67-72 Chevrolet/GMC Mine is in storage for the Winter but like any other day today I thought about next spring and how I'm going to install the parts I've been gathering. I have an ECE rear gas tank to go in as well as integrated shoulder seat belt seats from a 2003 Chev truck. I want to yank the gas tank from the cab before I install the seats and that means I need to install the rear gas tank. If I take the box off the truck to install the rear tank I might as well redo the wood floor as well. Where does it end, or does it ? __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

12-01-2009, 09:20 AM	#42
fdbdw Registered User Join Date: Jan 2009 Location: colorado springs Posts: 479	Re: What have you done to your 67-72 Chevrolet/GMC smoked the tires for the first time, 3/4 throttle, after about the 5th time Ive recalibrated the carb, lliving at 6000' elevation sucks but I think Im getting close to having it dialed in

12-01-2009, 10:39 AM	#43
independentcustoms Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 133	Re: What have you done to your 67-72 Chevrolet/GMC Yesterday I drove it to the gym, helped my girl move some stuff for her work, then drove it to the shop to install and rewire a blower motor. Today I'll drive it through the snow to the gym and then off to court.

12-01-2009, 11:23 AM	#44
marcsRX 68 C10 SWB Join Date: Nov 2009 Location: Chicago Posts: 216	Re: What have you done to your 67-72 Chevrolet/GMC Ordered a set of these... http://www.summitracing.com/parts/SU...9/?image=large __________________ "How much physical pain do you go through on a daily basis that you can directly attribute to your lack of intelligence?" -R0bman

12-01-2009, 11:24 AM	#45
marcsRX 68 C10 SWB Join Date: Nov 2009 Location: Chicago Posts: 216	Re: What have you done to your 67-72 Chevrolet/GMC I need a garage heater, or else this project is going to get frozen in its tracks. Freakin cold in Chicago, and its only going to get worse. __________________ "How much physical pain do you go through on a daily basis that you can directly attribute to your lack of intelligence?" -R0bman

12-01-2009, 12:04 PM	#46
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: What have you done to your 67-72 Chevrolet/GMC drove it to college in the rain.................left some more black marks gonna put in a new thermostat, and hook up the heater __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted Last edited by americanmusc1e; 12-01-2009 at 12:07 PM.

12-01-2009, 12:23 PM	#48
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: What have you done to your 67-72 Chevrolet/GMC went outside and looked at it. still waiting for 3-jaw puller in the mail so i can change timing set. probably will poke around today. maybe finish the passenger side airbag system... __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

12-01-2009, 12:39 PM	#49
chevellelover chevellelover Join Date: Nov 2008 Location: albuquqerque new mexico Posts: 88	Re: What have you done to your 67-72 Chevrolet/GMC yesterday i put new tires on it and cut my exhaust tips __________________ 1978 Trans Am 400/4speed Year One Snowflakes 1980 c10 shortbed 1999 Suburban 5/7 drop US Mags Roadsters 1999 GMC Sierra Classic 4x4-MINT 2015 Challenger Scat Pack 6.4 8 Speed

12-01-2009, 12:42 PM	#50
Roland Junior Member Join Date: Nov 2006 Location: Brandon, MS Posts: 134	Re: What have you done to your 67-72 Chevrolet/GMC Smeared some paint remover on the top of the cab and on the firewall. Recieved new cab corners and rockers from Classic Muscle.

Register or Log In To remove these advertisements.