cutting rear coils? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WHAMMY'DWONDER · 01-27-2010, 02:39 AM

looking good!

txinliner · 04-07-2012, 12:42 AM

Quote:

Originally Posted by chopper john

this is how it sits now with the rear coils cut . thanks alot guys it rides beautiful. i used a set of g body springs.

didnt see when this was posted but the stance is *****icn gonna try it

chopper john · 01-27-2010, 02:55 AM

thanks for the advice. its smooth.

bama63 · 04-07-2012, 11:12 AM

just an FYI

Just wanted to add a note to this thread about the rear Jeep TJ/LJ springs.
There are four different versions of the springs that were used from 1997 through 2006. These are the ones that can be used on the C10. Similar rear springs could be found on the Jeep Grand Cherokee ZJ. All four versions are the same length wise but vary in rate.
The only way to tell them apart is by the color coded tags that are on the springs from the factory, they read as follows:
103AA (or 3AA) 130lb.
104AA (or 4AA) 140lb.
105AA (or 5AA) 150lb.
106AA (or 6AA) 160lb.

hope this helps

**Captainfab** · 04-08-2012, 12:06 AM

Thanks for sharing the info you discovered.

01-27-2010, 02:39 AM	#1
WHAMMY'DWONDER Registered User Join Date: May 2009 Location: ALBANY OREGON Posts: 13	Re: cutting rear coils? looking good!

01-27-2010, 02:55 AM	#3
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: cutting rear coils? thanks for the advice. its smooth.

04-07-2012, 11:12 AM	#4
bama63 Registered User Join Date: Jun 2010 Location: gadsden, alabama Posts: 468	Re: cutting rear coils? just an FYI Just wanted to add a note to this thread about the rear Jeep TJ/LJ springs. There are four different versions of the springs that were used from 1997 through 2006. These are the ones that can be used on the C10. Similar rear springs could be found on the Jeep Grand Cherokee ZJ. All four versions are the same length wise but vary in rate. The only way to tell them apart is by the color coded tags that are on the springs from the factory, they read as follows: 103AA (or 3AA) 130lb. 104AA (or 4AA) 140lb. 105AA (or 5AA) 150lb. 106AA (or 6AA) 160lb. hope this helps __________________ Due to financial constraints, the light at the end of the tunnel will be shut off until further notice

04-08-2012, 12:06 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: cutting rear coils? Thanks for sharing the info you discovered. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.