started a 5.3l/4l60e swap this weekend - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69face · 03-23-2010, 04:53 PM

You have no idea those are just the ones at home

thump16 · 03-23-2010, 07:23 PM

I thought it was your girls truck at first cuz you have so many projects going on. LS swaps are taking over.

69face · 03-23-2010, 07:36 PM

I'm painting her truck next week

69face · 04-04-2010, 03:09 PM

yeah so painting her truck didnt work out but I'm running the corvette fpr, fmu, internal and external walbro pumps, and adjustable fpr at the rail after i finish typing this. the tank is mounted and i will take picture tomorrow.

69face · 04-07-2010, 12:20 AM

here are few pictures of the fuel system going into play. I ran an intank walbro to the corvette regulator (with an FMU on the return line) to an external walbro to the adjustable fuel pump regulator to the rail. if anyone has any input on the fuel setup let me know thanks in advance!
Name: 2010-04-06 12.19.43.jpg
Views: 789
Size: 36.9 KB

Name: 2010-04-06 12.19.43.jpg
Views: 789
Size: 36.9 KB

Name: 2010-04-06 12.19.52.jpg
Views: 784
Size: 34.2 KB

Name: 2010-04-06 12.20.07.jpg
Views: 791
Size: 39.6 KB

69face · 04-07-2010, 12:22 AM

also should i run a separate relay for the internal and external pumps?

glock35ipsc · 04-07-2010, 09:39 AM

Personally I would ditch the extra regulator/FMU, upgrade to larger injectors, and tune accordingly.

STOCKISH · 04-07-2010, 09:47 AM

I agree with Bob, but thats just my opinion. Truck is looking good man.

glock35ipsc · 04-07-2010, 10:26 AM

One of the more common mods with a supercharger on a stock GenIII/LS is to upgrade to 8.1L injectors and tune the PCM accordingly. Although I ran stock injectors with the stock pump and the Whipple piggyback electronics on my blown 5.3 for tens of thousands of hard miles without any issues.

Dang I wish I would have kept that Whipple.

69face · 04-07-2010, 01:33 PM

I have 52 lb injectors already. I was just using the regulator so that I could have an extra filter since I already paid for it.

69face · 04-21-2010, 11:03 PM

today, I put the fuel pressure gauge, msd wires, throttle spacer, injector pigtail adapters, and finished up some wiring
Name: 2010-04-21 17.24.38.jpg
Views: 726
Size: 60.3 KB

Name: 2010-04-21 17.24.38.jpg
Views: 726
Size: 60.3 KB

Name: 2010-04-21 17.28.29.jpg
Views: 729
Size: 60.2 KB

Name: 2010-04-21 18.20.07.jpg
Views: 725
Size: 62.9 KB

69face · 05-03-2010, 01:34 AM

i got a little done today. I finished welding up the firewall and undercoated and painted it. I put the harness on, I made a box for the computer, installed the throttle cable, did a little body work to the door and finished routing all of the grounds. here are a few pictures!
Name: 2010-04-08 11.02.46.jpg
Views: 703
Size: 68.3 KB

Name: 2010-04-08 11.02.46.jpg
Views: 703
Size: 68.3 KB

Name: 2010-04-08 13.05.24.jpg
Views: 710
Size: 59.4 KB

Name: 2010-05-01 18.55.30.jpg
Views: 710
Size: 55.2 KB

Name: 2010-05-02 13.25.27.jpg
Views: 715
Size: 62.0 KB

Name: 2010-05-02 14.12.05.jpg
Views: 705
Size: 23.8 KB

69face · 05-03-2010, 01:48 AM

Name: 2010-05-02 16.46.35.jpg
Views: 703
Size: 101.8 KB

Name: 2010-05-02 17.33.20.jpg
Views: 706
Size: 71.5 KB

Name: 2010-05-02 17.39.44.jpg
Views: 711
Size: 41.4 KB

Name: 2010-05-02 19.20.03.jpg
Views: 716
Size: 65.0 KB

69face · 05-04-2010, 02:49 AM

started today yessssssssss!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

but the stupid fuel rails are leaking crazy.
Name: 2010-05-03 19.49.14.jpg
Views: 684
Size: 48.4 KB

Name: 2010-05-03 19.49.20.jpg
Views: 692
Size: 45.3 KB

misternash2 · 05-04-2010, 08:15 AM

wahoo!! congrats man. just gotta run the demons out of it and it's gonna be

glock35ipsc · 05-04-2010, 09:19 AM

Sweet, congrats! If you haven't already, don't forget to drill some drain holes in the bottom of the PCM box.

Where is the supercharger?

69face · 05-04-2010, 03:19 PM

I haven't had any tuning for the supercharger so I'm not going to run it until it's time to tune

glock35ipsc · 05-04-2010, 03:36 PM

Ah, gotchya!

menace121978 · 05-04-2010, 08:36 PM

right on dude!!!!!!

STOCKISH · 05-04-2010, 08:52 PM

Awesome, I'd love to have that charger for my 6.0!

69face · 05-05-2010, 02:55 PM

No! Thank all if you and this board. I learn something new everytime I get on.

69face · 05-05-2010, 03:00 PM

W

Quote:

Originally Posted by 1972SuperCheyenne

Awesome, I'd love to have that charger for my 6.0!

The charger came off of a lq9 and because of the higher compression the hoses kept blowing off.

69face · 05-05-2010, 04:33 PM

short video

YouTube- 5.3l vortec swap

69face · 05-27-2010, 01:54 AM

i got the exhaust mostly tacked up and just need one more coat of primer to get this thing daily drivable again. here are a few pics Name: 2010-05-20 19.08.27.jpg
Views: 585
Size: 50.1 KB

Name: 2010-05-20 19.08.27.jpg
Views: 585
Size: 50.1 KB

Name: 2010-05-20 19.08.40.jpg
Views: 586
Size: 50.6 KB

Name: 2010-05-21 14.01.42.jpg
Views: 582
Size: 53.5 KB

Name: 2010-05-21 14.01.53.jpg
Views: 590
Size: 46.2 KB

Name: 2010-05-26 17.11.29.jpg
Views: 584
Size: 33.1 KB

menace121978 · 05-27-2010, 08:50 AM

right on buddy nice work! hows the motor running?

03-23-2010, 04:53 PM	#26
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend You have no idea those are just the ones at home __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

03-23-2010, 07:23 PM	#27
thump16 Registered User Join Date: Jul 2005 Location: Valdosta GA Posts: 708	Re: started a 5.3l/4l60e swap this weekend I thought it was your girls truck at first cuz you have so many projects going on. LS swaps are taking over.

03-23-2010, 07:36 PM	#28
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend I'm painting her truck next week __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

04-04-2010, 03:09 PM	#29
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend yeah so painting her truck didnt work out but I'm running the corvette fpr, fmu, internal and external walbro pumps, and adjustable fpr at the rail after i finish typing this. the tank is mounted and i will take picture tomorrow. __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

04-07-2010, 12:20 AM	#30
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend here are few pictures of the fuel system going into play. I ran an intank walbro to the corvette regulator (with an FMU on the return line) to an external walbro to the adjustable fuel pump regulator to the rail. if anyone has any input on the fuel setup let me know thanks in advance! __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

04-07-2010, 12:22 AM	#31
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend also should i run a separate relay for the internal and external pumps? __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

04-07-2010, 09:39 AM	#32
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: started a 5.3l/4l60e swap this weekend Personally I would ditch the extra regulator/FMU, upgrade to larger injectors, and tune accordingly. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-07-2010 at 09:39 AM.

04-07-2010, 09:47 AM	#33
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: started a 5.3l/4l60e swap this weekend I agree with Bob, but thats just my opinion. Truck is looking good man. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

04-07-2010, 10:26 AM	#34
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: started a 5.3l/4l60e swap this weekend One of the more common mods with a supercharger on a stock GenIII/LS is to upgrade to 8.1L injectors and tune the PCM accordingly. Although I ran stock injectors with the stock pump and the Whipple piggyback electronics on my blown 5.3 for tens of thousands of hard miles without any issues. Dang I wish I would have kept that Whipple. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-07-2010 at 10:28 AM.

04-07-2010, 01:33 PM	#35
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend I have 52 lb injectors already. I was just using the regulator so that I could have an extra filter since I already paid for it. __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

04-21-2010, 11:03 PM	#36
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend today, I put the fuel pressure gauge, msd wires, throttle spacer, injector pigtail adapters, and finished up some wiring __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

05-03-2010, 01:34 AM	#37
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend i got a little done today. I finished welding up the firewall and undercoated and painted it. I put the harness on, I made a box for the computer, installed the throttle cable, did a little body work to the door and finished routing all of the grounds. here are a few pictures! __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL! Last edited by 69face; 05-03-2010 at 01:42 AM.

05-03-2010, 01:48 AM	#38
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

05-04-2010, 02:49 AM	#39
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend started today yessssssssss!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!but the stupid fuel rails are leaking crazy. __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

05-04-2010, 08:15 AM	#40
misternash2 Registered User Join Date: Dec 2009 Location: monett, mo Posts: 230	Re: started a 5.3l/4l60e swap this weekend wahoo!! congrats man. just gotta run the demons out of it and it's gonna be



Register or Log In To remove these advertisements.

05-04-2010, 09:19 AM	#41
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: started a 5.3l/4l60e swap this weekend Sweet, congrats! If you haven't already, don't forget to drill some drain holes in the bottom of the PCM box. Where is the supercharger? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 05-04-2010 at 09:19 AM.

05-04-2010, 03:19 PM	#42
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend I haven't had any tuning for the supercharger so I'm not going to run it until it's time to tune __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

05-04-2010, 03:36 PM	#43
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: started a 5.3l/4l60e swap this weekend Ah, gotchya! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-04-2010, 08:36 PM	#44
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: started a 5.3l/4l60e swap this weekend right on dude!!!!!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

05-04-2010, 08:52 PM	#45
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: started a 5.3l/4l60e swap this weekend Awesome, I'd love to have that charger for my 6.0! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-05-2010, 02:55 PM	#46
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend No! Thank all if you and this board. I learn something new everytime I get on. __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

05-27-2010, 01:54 AM	#49
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: started a 5.3l/4l60e swap this weekend i got the exhaust mostly tacked up and just need one more coat of primer to get this thing daily drivable again. here are a few pics __________________ ""A bagged vehicle is only as good as it's wheel/tire combo!" -getlowness! my build thread http://67-72chevytrucks.com/vboard/s...=223747:metal: I'M SO SO CAL!

05-27-2010, 08:50 AM	#50
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: started a 5.3l/4l60e swap this weekend right on buddy nice work! hows the motor running? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

Register or Log In To remove these advertisements.