KS A few 65 GMC pieces - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC406 · 03-03-2010, 07:04 PM

not sure reighmey but can remove and take pics this weekend

GMC406 · 03-03-2010, 10:17 PM

If anyone would want the full rolling frame I would take $225 and deliver/meet within 150-200 miles for price of gas and a few bucks.

reighmey · 03-03-2010, 11:06 PM

Thanks. Don't have to be anything special just the right ones for the 65 fenderside (stepside).

Let me know cost plus shipping to 31815

reighmey · 03-03-2010, 11:38 PM

How is the tailgate?

GMC406 · 03-03-2010, 11:57 PM

shot

**DPowers** · 03-06-2010, 11:40 PM

PM me an address and I will $$ to you.

**ScottH** · 03-07-2010, 12:46 AM

I really only need the one heater control arm, which one broke? Same with the wipers, only need one.
If u can post or send me some pics of the heater control and wiper blade I can let u know if they will still work.

Thanks.
Scott

GMC406 · 03-07-2010, 12:52 AM

The left arm is the one that broke off can't get a picture of it as I left it behinde at the farm, probably be up there sometime thu the week, will pm you a pic of the wipers tm.

**ScottH** · 03-07-2010, 03:25 PM

Oh any news on the visors and belts?

Thanks.

GMC406 · 03-07-2010, 05:04 PM

toast and non existant, and after getting it in the light I dont beleive the wiper blade is what you are looking for

GMC406 · 03-07-2010, 05:07 PM

63 extreme low heres your dash

GMC406 · 03-07-2010, 05:28 PM

reighmey are these the lights you wanted? GMCMG this all you need?

**ScottH** · 03-07-2010, 07:05 PM

Thanks for letting me know. I checked my heater control and I need the right one, labeled heat. If the arm is good I'll take the controls along with the delete plate. LMK what the total would be.

Thanks.
Scott

GMC406 · 03-07-2010, 08:02 PM

shoot me 24 bucks and call it good. Shouldnt be to much to ship so that should be plenty.

4dranch · 03-09-2010, 10:30 PM

you wouldn't be selling the air breather would you?

03-03-2010, 07:04 PM	#1
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces not sure reighmey but can remove and take pics this weekend __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-03-2010, 10:17 PM	#2
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces If anyone would want the full rolling frame I would take $225 and deliver/meet within 150-200 miles for price of gas and a few bucks. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-03-2010 at 10:18 PM.

03-03-2010, 11:06 PM	#3
reighmey Registered User Join Date: Oct 2009 Location: lumpkin, ga Posts: 98	Re: A few 65 GMC pieces Thanks. Don't have to be anything special just the right ones for the 65 fenderside (stepside). Let me know cost plus shipping to 31815

03-03-2010, 11:38 PM	#4
reighmey Registered User Join Date: Oct 2009 Location: lumpkin, ga Posts: 98	Re: A few 65 GMC pieces How is the tailgate?

03-03-2010, 11:57 PM	#5
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces shot __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-06-2010, 11:40 PM	#6
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: A few 65 GMC pieces PM me an address and I will $$ to you. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-07-2010, 12:46 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: A few 65 GMC pieces I really only need the one heater control arm, which one broke? Same with the wipers, only need one. If u can post or send me some pics of the heater control and wiper blade I can let u know if they will still work. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 03-07-2010 at 12:46 AM.

03-07-2010, 12:52 AM	#8
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces The left arm is the one that broke off can't get a picture of it as I left it behinde at the farm, probably be up there sometime thu the week, will pm you a pic of the wipers tm. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-07-2010, 03:25 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: A few 65 GMC pieces Oh any news on the visors and belts? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-07-2010, 05:04 PM	#10
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces toast and non existant, and after getting it in the light I dont beleive the wiper blade is what you are looking for Attached Images __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-07-2010, 05:07 PM	#11
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces 63 extreme low heres your dash Attached Images __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-07-2010, 05:28 PM	#12
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces reighmey are these the lights you wanted? GMCMG this all you need? Attached Images __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-07-2010, 07:05 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: A few 65 GMC pieces Thanks for letting me know. I checked my heater control and I need the right one, labeled heat. If the arm is good I'll take the controls along with the delete plate. LMK what the total would be. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-07-2010, 08:02 PM	#14
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces shoot me 24 bucks and call it good. Shouldnt be to much to ship so that should be plenty. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-07-2010 at 08:04 PM.

03-09-2010, 10:30 PM	#15
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: A few 65 GMC pieces you wouldn't be selling the air breather would you? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.