Lets see some 1960 - 1966 engine bays - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64_C10 · 03-21-2011, 09:15 PM

Having trouble with my computer

64_C10 · 03-21-2011, 09:23 PM

Quote:

Originally Posted by Dan in Pasadena

Don't swap it out. 350's are common, a dressed out straight six is unique. Check out this 292:

That is sweet Dan. I have always been partial to the inliners since I had a 73 Nova with a 250 back in HS. Could you help answer my post at

http://www.67-72chevytrucks.com/vboa...d.php?t=453772

Thanks alot.

raycow · 08-19-2010, 08:18 PM

Quote:

Originally Posted by 63burb

I've been thinking...can I swap a newer straight 6 from a 69 pick up in to my 63? would it bolt up to my stock trany and mm?

It would be a total bolt-in. If the 6 is a 250, just use the mounts you have now. If it is a 292, you will need to replace the passenger side frame bracket and bolt the new one in the forward set of holes.

Ray

Rich 5150 69 · 08-19-2010, 08:34 PM

Nothiing to look at , but it is a dailey driver, big block soon....

1Bad62Pro/Street · 03-02-2011, 12:19 PM

UPDATE FELLAS:

Engine: Chevy 1969 C-10 350ci Cast Iron 3970010 4 Bolt Main 350ci (.30 over)
Heads: Chevrolet 291 327 Double/Cammel Hump 1.94 Int 1.50 Exh
Modifications: Chevy 355ci Engine
10.5:1 Compression Ratio
Pistons: Hyperedic Cast Aluminum Flat Top
Camshaft: Hydraulic Dual Pattern (Lift .443” Int., .465” Exh.)
Crankshaft: Nodular Cast iron

shoei1993 · 08-19-2010, 08:43 PM

heres mine

Sillyoldman · 08-19-2010, 09:02 PM

B&A of my 327. It's filthy right now but that's where I'm at with it.

72freak · 08-19-2010, 09:04 PM

Here is mine....some new plug wires and she should look a little better!

GGinferno · 08-19-2010, 09:45 PM

Here you go! Before and after

geezer#99 · 08-19-2010, 09:40 PM

V8's are like belly buttons. Everybody has one. Six in a row is the way to go!!!

1Bad62Pro/Street · 06-23-2012, 01:12 AM

Bump, nudge, ping, buzz, etc.

Posted via Mobile Device
Posted via Mobile Device

**DPowers** · 08-19-2010, 10:03 PM

Before and after

Demmit_Hemmit's 65 · 08-19-2010, 10:08 PM

Here's mine

OldGMJon · 11-16-2014, 03:49 PM

Quote:

Originally Posted by Demmit_Hemmit's 65

Here's mine

I like you burb...I went with that color on my panel...Don't have my 283 installed to show under the hood yet

Sick5 · 08-19-2010, 10:38 PM

how do u have your hood up with no inner fenders?

Quote:

Originally Posted by 1Bad62Pro/Street

Lets see some 1960 - 1966 engine bays!
Seen this post on the 1973 - 1987 side of the forum.
http://67-72chevytrucks.com/vboard/s...d.php?t=364147
Thought it would be good if we would have one here.

Did a quick search and didn't find any started.

1Bad62Pro/Street · 08-20-2010, 10:58 AM

Quote:

Originally Posted by Sick5

how do u have your hood up with no inner fenders?

Here you go Bud....
Pictures of the front end--(IFS):

YouTube- 1962 CHEVY C10 1/2 TON STEPSIDE...

**l79m20** · 08-20-2010, 11:32 AM

where are the pictures of trucks with L6 with A/C????

thunder71 · 08-21-2010, 08:46 AM

Quote:

Originally Posted by l79m20

where are the pictures of trucks with L6 with A/C????

here's mine

javadoc · 08-21-2010, 09:20 AM

Just did this in the past month.

Before, old leaky 283 and 46yrs of crud:

Outa here:

New 383, still cleaning things up

62 Bowtie · 08-20-2010, 11:38 AM

nuttin fancy

1Bad62Pro/Street · 08-20-2010, 12:26 PM

Quote:

Originally Posted by 62 Bowtie

nuttin fancy

Let me see some more pics of those valve covers!

brew8 · 08-20-2010, 12:39 PM

Here is one of mine

losthope · 08-24-2010, 08:31 PM

Quote:

Originally Posted by 62 Bowtie

nuttin fancy

nothing fancy your engine bay is clean!!

after seeing mine next to yours looks like i got my whole truck from a thrift store! jenny and i had a great time crusing with you guys and would love to do it again i ended up coming home that night and ordering some more chrome from lmc trucks! pics of your truck doesnt do it justice as in real life..thanks again for letting me crusie with you guys.

didnt mean to hi jack thread !

derail · 08-25-2010, 09:07 PM

The Sub....
Love your rig. I saw it at Goodguys a couple of years ago I think. I can't even see ONE wire in your engine bay. Nice job.

halfcockedcustoms · 08-20-2010, 08:40 AM

mine

03-21-2011, 09:15 PM	#1
64_C10 Registered User Join Date: Dec 2010 Location: Santa Fe, Texas Posts: 24	Re: Lets see some 1960 - 1966 engine bays Having trouble with my computer Last edited by 64_C10; 03-21-2011 at 09:18 PM. Reason: ?

08-19-2010, 08:34 PM	#4
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: Lets see some 1960 - 1966 engine bays Nothiing to look at , but it is a dailey driver, big block soon.... __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

03-02-2011, 12:19 PM	#5
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Lets see some 1960 - 1966 engine bays UPDATE FELLAS: Engine: Chevy 1969 C-10 350ci Cast Iron 3970010 4 Bolt Main 350ci (.30 over) Heads: Chevrolet 291 327 Double/Cammel Hump 1.94 Int 1.50 Exh Modifications: Chevy 355ci Engine 10.5:1 Compression Ratio Pistons: Hyperedic Cast Aluminum Flat Top Camshaft: Hydraulic Dual Pattern (Lift .443” Int., .465” Exh.) Crankshaft: Nodular Cast iron __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 01-25-2012 at 12:17 AM. Reason: Gosh............cuz I mesed up....;-)

08-19-2010, 08:43 PM	#6
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: Lets see some 1960 - 1966 engine bays heres mine Attached Images

08-19-2010, 09:02 PM	#7
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: Lets see some 1960 - 1966 engine bays B&A of my 327. It's filthy right now but that's where I'm at with it. Attached Images __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

08-19-2010, 09:04 PM	#8
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Lets see some 1960 - 1966 engine bays Here is mine....some new plug wires and she should look a little better! Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

08-19-2010, 09:45 PM	#9
GGinferno DiablosWeldingFabrication Join Date: Jun 2009 Location: Elverta ,CA Posts: 201	Re: Lets see some 1960 - 1966 engine bays Here you go! Before and after Attached Images

08-19-2010, 09:40 PM	#10
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,750	Re: Lets see some 1960 - 1966 engine bays V8's are like belly buttons. Everybody has one. Six in a row is the way to go!!! Attached Images

06-23-2012, 01:12 AM	#11
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Lets see some 1960 - 1966 engine bays Bump, nudge, ping, buzz, etc. Posted via Mobile Device Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

08-19-2010, 10:03 PM	#12
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,454	Re: Lets see some 1960 - 1966 engine bays Before and after Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-19-2010, 10:08 PM	#13
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: Lets see some 1960 - 1966 engine bays Here's mine Attached Images

08-20-2010, 11:32 AM	#17
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: Lets see some 1960 - 1966 engine bays where are the pictures of trucks with L6 with A/C????

08-21-2010, 09:20 AM	#19
javadoc Hey Watch this... Join Date: Sep 2007 Location: Parker, CO Posts: 414	Re: Lets see some 1960 - 1966 engine bays Just did this in the past month. Before, old leaky 283 and 46yrs of crud: Outa here: New 383, still cleaning things up __________________ What have I gotten myself into now? 1964 Chevy Stepside - 383 hydraulic roller Vortec ... a work in progress 2000 Volvo V70R - 340awhp, 22psi, meth-injected of Porsche-eating fun. The grocery-getter on steroids

08-20-2010, 11:38 AM	#20
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: Lets see some 1960 - 1966 engine bays nuttin fancy Attached Images

08-20-2010, 12:39 PM	#22
brew8 Registered User Join Date: Dec 2008 Location: Billings, MT Posts: 130	Re: Lets see some 1960 - 1966 engine bays Here is one of mine Attached Images



Register or Log In To remove these advertisements.

08-25-2010, 09:07 PM	#24
derail Registered User Join Date: Sep 2005 Location: redding,ca. Posts: 182	Re: Lets see some 1960 - 1966 engine bays The Sub.... Love your rig. I saw it at Goodguys a couple of years ago I think. I can't even see ONE wire in your engine bay. Nice job.

08-20-2010, 08:40 AM	#25
halfcockedcustoms Registered User Join Date: Aug 2009 Location: Rushville IL Posts: 117	Re: Lets see some 1960 - 1966 engine bays mine

Register or Log In To remove these advertisements.