ME 68 parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

no moa · 09-09-2010, 07:22 AM

Quote:

Originally Posted by NGN

What conditoin are the mirror brackets in after thirty years ?

Badly rusted, the broke when I tried to remove them.
Posted via Mobile Device

Cruisin' Oklahoma · 09-09-2010, 03:13 PM

what condition are the door striker and plates in?

no moa · 09-09-2010, 03:48 PM

Quote:

Originally Posted by Cruisin' Oklahoma

what condition are the door striker and plates in?

check for ya.

**425HP409** · 09-10-2010, 11:52 PM

If you do not sell the engine complete I am interested in the air cleaner with spacer and breather pipe and hose to valve cover.

rbpedersen · 09-12-2010, 11:44 PM

Do you have the front drum brakes and hubs for a 68 gmc 1/2 ton

no moa · 09-13-2010, 08:49 AM

Quote:

Originally Posted by rbpedersen

Do you have the front drum brakes and hubs for a 68 gmc 1/2 ton

Have the hubs, the brakes are frozen up and i'm sure no good.

**jaros44sr** · 09-13-2010, 10:14 AM

Quote:

Originally Posted by no moa

40 plus shipping for the roof lights and headlight surrounds

Again these are 5/10
Posted via Mobile Device

OK, do you take paypal or PMO?

How about 40 and you pay shipping?

no moa · 09-13-2010, 10:26 AM

Quote:

Originally Posted by classic1967chevy

how much would you want for the inner door panels ???

Cheap!!!
Posted via Mobile Device

no moa · 09-13-2010, 03:30 PM

Quote:

Originally Posted by jaros44sr

OK, do you take paypal or PMO?

How about 40 and you pay shipping?

Check your PM

projectjimmie68 · 09-29-2010, 10:47 AM

Are you still selling parts off this truck? If so how much for the shaft that connects the steering column to the steering gear box shipped to zip 32136? Thanks projectjimmie...........

no moa · 09-29-2010, 11:58 AM

Quote:

Originally Posted by projectjimmie68

Are you still selling parts off this truck? If so how much for the shaft that connects the steering column to the steering gear box shipped to zip 32136? Thanks projectjimmie...........

Had to cut it off, the ends were badly rusted, but I have another truck coming soon.
Posted via Mobile Device

DaSchlange · 09-29-2010, 12:36 PM

Awesome, I will check back soon then. If it is a 250 and you are parting it out, PM me because I am very interested.

no moa · 09-29-2010, 12:42 PM

Quote:

Originally Posted by DaSchlange

Awesome, I will check back soon then. If it is a 250 and you are parting it out, PM me because I am very interested.

Your alset, you should have pics tonight of the piece you are looking for. I have a couple still on the motors.

hoss67 · 09-29-2010, 12:50 PM

Is the rear end a posi? If so I would be interested in just the posi unit? Pending pics. Thanks Randy

projectjimmie68 · 09-29-2010, 01:27 PM

Thanks---------- Please let me know about the other truck as soon as you get it. Thanks again projectjimmie---------------

no moa · 09-29-2010, 01:44 PM

Quote:

Originally Posted by hoss67

Is the rear end a posi? If so I would be interested in just the posi unit? Pending pics. Thanks Randy

It is not, it was a super base truck. The label in the glove box had one thing on it, was the paint color. lol

68C10HotRod · 09-29-2010, 01:55 PM

Do you still have the front fender eyebrow trim? Did it have a decent one across the hood between the brows? LMK price & shipping to 68134 if you do.

DaSchlange · 09-29-2010, 01:55 PM

Quote:

Originally Posted by no moa

Your alset, you should have pics tonight of the piece you are looking for. I have a couple still on the motors.

Sounds awesome, just get them to me when you can. Do you also have a good condition heater tube? I don't know the correct name for it, but it's the piece that bolted over the exhaust manifold and ran up to the intake filter and allowed it to have warmer hair circulation. Thanks!

no moa · 09-29-2010, 03:39 PM

Quote:

Originally Posted by 68C10HotRod

Do you still have the front fender eyebrow trim? Did it have a decent one across the hood between the brows? LMK price & shipping to 68134 if you do.

PM sent

LandonL · 09-29-2010, 03:54 PM

Have you had a chance to take that exhaust manifold off yet, we've been corresponding through email.

bestchevyfan · 09-30-2010, 07:25 AM

Hi, i will take the door panels how much is cheap ? And how do you wamt to get paid. Thanks,buddy

no moa · 09-30-2010, 07:46 AM

Quote:

Originally Posted by LandonL

Have you had a chance to take that exhaust manifold off yet, we've been corresponding through email.

Yes

no moa · 09-30-2010, 07:48 AM

Quote:

Originally Posted by bestchevyfan

Hi, i will take the door panels how much is cheap ? And how do you wamt to get paid. Thanks,buddy

$50 shipped (80% of that is shipping) + 3% if you use paypal

b.sharp · 10-01-2010, 10:22 PM

Did this have any orange seat belts? I need center pieces for my 70, I have the outer retractable pieces.

Thank you,

no moa · 10-02-2010, 08:19 AM

Quote:

Originally Posted by b.sharp

Did this have any orange seat belts? I need center pieces for my 70, I have the outer retractable pieces.

Thank you,

I think they are red, but i'll check.

09-09-2010, 03:13 PM	#27
Cruisin' Oklahoma Registered User Join Date: May 2010 Location: Skiatook, Oklahoma Posts: 27	Re: 68 parts what condition are the door striker and plates in? __________________ 69' Stepside, 350SB/TH350, Holley 600 4 Barrel, Headers, Edelbrock Intake, Valve Covers, and Breather, 275/60 R15's, Disc Brake conversion. "For we know that God works all things for the good of those that love Him, to those that are called according to His purpose." --Romans 8:28

09-10-2010, 11:52 PM	#29
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: 68 parts If you do not sell the engine complete I am interested in the air cleaner with spacer and breather pipe and hose to valve cover. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

09-12-2010, 11:44 PM	#30
rbpedersen Registered User Join Date: Feb 2009 Location: Las cruces, N.M. Posts: 3	Re: 68 parts Do you have the front drum brakes and hubs for a 68 gmc 1/2 ton

09-29-2010, 10:47 AM	#35
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 68 parts Are you still selling parts off this truck? If so how much for the shaft that connects the steering column to the steering gear box shipped to zip 32136? Thanks projectjimmie...........

09-29-2010, 12:36 PM	#37
DaSchlange Registered User Join Date: Sep 2010 Location: Gainesville, MO Posts: 251	Re: 68 parts Awesome, I will check back soon then. If it is a 250 and you are parting it out, PM me because I am very interested.

09-29-2010, 12:50 PM	#39
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: 68 parts Is the rear end a posi? If so I would be interested in just the posi unit? Pending pics. Thanks Randy

09-29-2010, 01:27 PM	#40
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 68 parts Thanks---------- Please let me know about the other truck as soon as you get it. Thanks again projectjimmie---------------

09-29-2010, 01:55 PM	#42
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: 68 parts Do you still have the front fender eyebrow trim? Did it have a decent one across the hood between the brows? LMK price & shipping to 68134 if you do. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

09-29-2010, 03:54 PM	#45
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: 68 parts Have you had a chance to take that exhaust manifold off yet, we've been corresponding through email. __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640

09-30-2010, 07:25 AM	#46
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 68 parts Hi, i will take the door panels how much is cheap ? And how do you wamt to get paid. Thanks,buddy

10-01-2010, 10:22 PM	#49
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 68 parts Did this have any orange seat belts? I need center pieces for my 70, I have the outer retractable pieces. Thank you,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.