LSx swap Speedo ? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rob32472 · 01-23-2011, 10:49 AM

Quote:

Originally Posted by menace121978

subscribing... i'm hooking up my autometer speedo now but i was looking over the wiring diagram for it and it says there is supposed to be 2 wires for signal input. 1 from the computer and one from the tranny. i'm stumped because i only have 1 wire. and its coming from the computer. any input on this?

one goes to the speedo connection the other to ground..... I just finished the swap with autometer gauges and it works perfectly!

menace121978 · 01-24-2011, 10:23 AM

right on! at least i know its hooked up right

thank you

rob32472 · 01-24-2011, 05:50 PM

Glad to help!

87chevy.com · 01-26-2011, 12:22 AM

I have my 91 gauge cluster vss wire comming from the pcm. theres an output for it. im sure all speedos work in similar fasion, the only thing that will change is the Pulses Per Mile, which can be adjusted if you have a tuning program.
clint

60apache · 02-23-2011, 09:21 PM

Quote:

Originally Posted by Clyde65

I did, you have to hook it up at the VSS out wire by the trans and THEN calibrate it. Dont let anyone tell you to hook it up out of the PCM, it wont work properly.

I was trying to get my dolphin speedo working and reading correctly today I have it spliced to the purple wire on the vss going to the green wire on the back of gauge. it works but needs to be programmed. can you look into your gauge and give me the numbers you have programmed so I will have a starting point?

60apache · 02-23-2011, 09:32 PM

oh is your speedo one with dip switches or a button?

**Clyde65** · 02-24-2011, 10:55 AM

I can do that for you, all I did really was set it up and tweeked it twice, I will get you that info at lunch.

sorry it has a button. do you have the provision for a button on the back? or is it only dips

60apache · 02-25-2011, 07:51 PM

mine it the button type.

60apache · 02-26-2011, 07:59 PM

clyde I got mine hooked up to the vss wire from the trans and calibrated it to 160 frequency its dead on but when I stop it does what yours was doing and pegs out. how did you correct this?

68chevyLQ4 · 03-17-2011, 06:29 PM

Quote:

Originally Posted by 60apache

clyde I got mine hooked up to the vss wire from the trans and calibrated it to 160 frequency its dead on but when I stop it does what yours was doing and pegs out. how did you correct this?

About to do this myself. Answer to this question would be great help.. Thanks!

6.0 lq4 / 4L80E

01-24-2011, 10:23 AM	#27
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LSx swap Speedo ? right on! at least i know its hooked up right thank you __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

01-24-2011, 05:50 PM	#28
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: LSx swap Speedo ? Glad to help!

01-26-2011, 12:22 AM	#29
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	Re: LSx swap Speedo ? I have my 91 gauge cluster vss wire comming from the pcm. theres an output for it. im sure all speedos work in similar fasion, the only thing that will change is the Pulses Per Mile, which can be adjusted if you have a tuning program. clint __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

02-23-2011, 09:32 PM	#31
60apache Registered User Join Date: Mar 2010 Location: brandon, ms Posts: 385	Re: LSx swap Speedo ? oh is your speedo one with dip switches or a button?

02-24-2011, 10:55 AM	#32
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: LSx swap Speedo ? I can do that for you, all I did really was set it up and tweeked it twice, I will get you that info at lunch. sorry it has a button. do you have the provision for a button on the back? or is it only dips __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 02-24-2011 at 10:57 AM.

02-25-2011, 07:51 PM	#33
60apache Registered User Join Date: Mar 2010 Location: brandon, ms Posts: 385	Re: LSx swap Speedo ? mine it the button type.

02-26-2011, 07:59 PM	#34
60apache Registered User Join Date: Mar 2010 Location: brandon, ms Posts: 385	Re: LSx swap Speedo ? clyde I got mine hooked up to the vss wire from the trans and calibrated it to 160 frequency its dead on but when I stop it does what yours was doing and pegs out. how did you correct this?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.