VA 69/70 4wd gmc jimmy parts f/s - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 02-11-2011, 12:42 AM

this looks like some kind of gas can holder.

billsbowtie · 02-11-2011, 12:46 AM

riddla can you post a pic. of where they need cut. how much and so on. i think i have the tail light and reverce housings sold.

billsbowtie · 02-11-2011, 12:48 AM

critter is the part i put a red line around what you need?

RIDDLA · 02-11-2011, 01:01 AM

I can get you a pic but not till sunday or so, work gots me workin full days.
I would say from the rear marker light back both sides. My taillights are pushed in bad tryin to save the old gmc They dont need to be great.

billsbowtie · 02-11-2011, 01:23 AM

do you need to start at rear of marker light or do you need marker lights included.

Critter · 02-11-2011, 01:38 AM

Quote:

Originally Posted by billsbowtie

critter is the part i put a red line around what you need?

Yep! Is it decent?

billsbowtie · 02-11-2011, 01:42 AM

RIDDLA if both sides are they look good from the rear both sides cut off and shipped to you for $125.00. let me know if you are interested .
critter i will check on the piece you need.

RIDDLA · 02-11-2011, 09:39 AM

done and done bill will take from the front of the marker light

ASEASIDER · 02-11-2011, 08:16 PM

Is the roll bar spoken for? I am @ 23480

billsbowtie · 02-11-2011, 09:19 PM

jmac11 has ask about it you are 2nd on the roll bar.

ASEASIDER · 02-11-2011, 09:32 PM

COOL thank you

billsbowtie · 02-12-2011, 08:42 PM

i got some stuff off today but my camera is broke right now.
RIDDLA got your parts off pm sent.
critter lower half has rust let me know if you need some of the upper half.

CORSAIR wheels were odd balls.
jimer1964 transfercase shifter was nicer than i thought . it's in good driver shape boot has small cut next to shifter $100.00 shifter,boot,knob ring was not there.
gas tank spout good driver shape $40.00 shipped.
rad. metel hose piece fair driver shape $30.00 shipped.
trans.cover good driver shape $45.00 shipped.
tail gate henge set 4 pieces $25.00 shipped.
i will post pic.s when ever i get my camera fixed.

Critter · 02-12-2011, 10:02 PM

Quote:

Originally Posted by billsbowtie

critter lower half has rust let me know if you need some of the upper half.

I guess I'll pass, the bottom is what I am really needing. Thanks though.

VA72C10 · 02-12-2011, 11:05 PM

Does it have the factory hardware to hold the rear panels on? If so, I'd like it.

Also all the tailgate hardware inside the gate including the handle and rods....and all the hardware on the truck

Door guts if useable? (door latches, window channels, regulators, lock hardware/rods)

And any of the brackets to mount the top or the piece that goes on top of the door at the vent window....

And the cover for the gas fill tube if still there (behind the panels)

Price for all shipped to 23112?

JMac11 · 02-12-2011, 11:08 PM

Let Asea have it Bill..... transport near about impossible.

**k5blazin** · 02-12-2011, 11:26 PM

How rusty is the bed floor? I am looking for a few patch panels around the rear wheel wells! Thanks
Posted via Mobile Device

billsbowtie · 02-13-2011, 03:00 AM

Critter sorry i couldnt help you butthat part you need is soft and i don't think it would help.
VA72C10 i think i took some of the brackets that holds the inner trim/panels in place today there were 4 two on each of the rear stake pockets. there is some more things like that about 1/2 the inner bed sides.i have never took a tail gate apart i will see what i can do.door tops are gone filler tube cover was gone also.i will get back with you on the other parts sometime this week.
thanks jmac11 for responding.
k5blazin can you post a pic. or 2 of where you need?

billsbowtie · 02-13-2011, 03:01 AM

ASEASIDER it's your turn on the roll bar.

**k5blazin** · 02-13-2011, 09:41 AM

here are the areas i need.... thanks

**k5blazin** · 02-13-2011, 09:43 AM

third pic!

4oldcars · 02-13-2011, 10:02 AM

Clarify windshield - - glass is fogged? gasket is bad? $50? I need a good glass. I'll drive over there if it's good.

ASEASIDER · 02-13-2011, 07:53 PM

PM sent

billsbowtie · 02-13-2011, 08:48 PM

4oldcars windshield has fog/smoke around edeges no breaks would only be good for a farm truck. rubber gasket it cut . chrome/trim is good driver shape.you should be able to get a new windshield for around $200.00.
k5blazin could you get by with about any piece of the bed floor ? a piece about 18" by 12" or 24" by 12" piece.
ASEASIDER pm returned.

**k5blazin** · 02-13-2011, 10:02 PM

[QUOTE=billsbowtie;4483897]4oldcars windshield has fog/smoke around edeges no breaks would only be good for a farm truck. rubber gasket it cut . chrome/trim is good driver shape.you should be able to get a new windshield for around $200.00.
k5blazin could you get by with about any piece of the bed floor ? a piece about 18" by 12" or 24" by 12" piece.
ASEASIDER pm returned.[/

Really looking for those areas due to the smaller rib closest to the bedsides. Thanks
Posted via Mobile Device

billsbowtie · 02-13-2011, 11:35 PM

k5blazin those rear pieces next to tail light i cut out for RIDDLA he got some of the bed floor with the pieces he needed. when/if i can get my camera to download pics. i will post some of whats left of bed floor.

02-11-2011, 12:42 AM	#26
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s this looks like some kind of gas can holder. __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 02-11-2011 at 12:43 AM.

02-11-2011, 12:46 AM	#27
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s riddla can you post a pic. of where they need cut. how much and so on. i think i have the tail light and reverce housings sold. __________________ i have 67/72 chevy truck parts f/s.

02-11-2011, 12:48 AM	#28
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s critter is the part i put a red line around what you need? __________________ i have 67/72 chevy truck parts f/s.

02-11-2011, 01:01 AM	#29
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	Re: 69/70 4wd gmc jimmy parts f/s I can get you a pic but not till sunday or so, work gots me workin full days. I would say from the rear marker light back both sides. My taillights are pushed in bad tryin to save the old gmc They dont need to be great. __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

02-11-2011, 01:23 AM	#30
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s do you need to start at rear of marker light or do you need marker lights included. __________________ i have 67/72 chevy truck parts f/s.

02-11-2011, 01:42 AM	#32
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s RIDDLA if both sides are they look good from the rear both sides cut off and shipped to you for $125.00. let me know if you are interested . critter i will check on the piece you need. __________________ i have 67/72 chevy truck parts f/s.

02-11-2011, 09:39 AM	#33
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	Re: 69/70 4wd gmc jimmy parts f/s done and done bill will take from the front of the marker light __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

02-11-2011, 08:16 PM	#34
ASEASIDER Registered User Join Date: Feb 2008 Location: Wachapreague, Va. Posts: 73	Re: 69/70 4wd gmc jimmy parts f/s Is the roll bar spoken for? I am @ 23480

02-11-2011, 09:19 PM	#35
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s jmac11 has ask about it you are 2nd on the roll bar. __________________ i have 67/72 chevy truck parts f/s.

02-11-2011, 09:32 PM	#36
ASEASIDER Registered User Join Date: Feb 2008 Location: Wachapreague, Va. Posts: 73	Re: 69/70 4wd gmc jimmy parts f/s COOL thank you

02-12-2011, 08:42 PM	#37
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s i got some stuff off today but my camera is broke right now. RIDDLA got your parts off pm sent. critter lower half has rust let me know if you need some of the upper half. CORSAIR wheels were odd balls. jimer1964 transfercase shifter was nicer than i thought . it's in good driver shape boot has small cut next to shifter $100.00 shifter,boot,knob ring was not there. gas tank spout good driver shape $40.00 shipped. rad. metel hose piece fair driver shape $30.00 shipped. trans.cover good driver shape $45.00 shipped. tail gate henge set 4 pieces $25.00 shipped. i will post pic.s when ever i get my camera fixed. __________________ i have 67/72 chevy truck parts f/s.

02-12-2011, 11:05 PM	#39
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 69/70 4wd gmc jimmy parts f/s Does it have the factory hardware to hold the rear panels on? If so, I'd like it. Also all the tailgate hardware inside the gate including the handle and rods....and all the hardware on the truck Door guts if useable? (door latches, window channels, regulators, lock hardware/rods) And any of the brackets to mount the top or the piece that goes on top of the door at the vent window.... And the cover for the gas fill tube if still there (behind the panels) Price for all shipped to 23112? __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-12-2011 at 11:06 PM.

02-12-2011, 11:08 PM	#40
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: 69/70 4wd gmc jimmy parts f/s Let Asea have it Bill..... transport near about impossible.

02-12-2011, 11:26 PM	#41
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 398	Re: 69/70 4wd gmc jimmy parts f/s How rusty is the bed floor? I am looking for a few patch panels around the rear wheel wells! Thanks Posted via Mobile Device

02-13-2011, 03:00 AM	#42
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s Critter sorry i couldnt help you butthat part you need is soft and i don't think it would help. VA72C10 i think i took some of the brackets that holds the inner trim/panels in place today there were 4 two on each of the rear stake pockets. there is some more things like that about 1/2 the inner bed sides.i have never took a tail gate apart i will see what i can do.door tops are gone filler tube cover was gone also.i will get back with you on the other parts sometime this week. thanks jmac11 for responding. k5blazin can you post a pic. or 2 of where you need? __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

02-13-2011, 03:01 AM	#43
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s ASEASIDER it's your turn on the roll bar. __________________ i have 67/72 chevy truck parts f/s.

02-13-2011, 09:41 AM	#44
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 398	Re: 69/70 4wd gmc jimmy parts f/s here are the areas i need.... thanks Attached Images

02-13-2011, 09:43 AM	#45
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 398	Re: 69/70 4wd gmc jimmy parts f/s third pic! Attached Images

02-13-2011, 10:02 AM	#46
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: 69/70 4wd gmc jimmy parts f/s Clarify windshield - - glass is fogged? gasket is bad? $50? I need a good glass. I'll drive over there if it's good. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

02-13-2011, 07:53 PM	#47
ASEASIDER Registered User Join Date: Feb 2008 Location: Wachapreague, Va. Posts: 73	Re: 69/70 4wd gmc jimmy parts f/s PM sent

02-13-2011, 08:48 PM	#48
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s 4oldcars windshield has fog/smoke around edeges no breaks would only be good for a farm truck. rubber gasket it cut . chrome/trim is good driver shape.you should be able to get a new windshield for around $200.00. k5blazin could you get by with about any piece of the bed floor ? a piece about 18" by 12" or 24" by 12" piece. ASEASIDER pm returned. __________________ i have 67/72 chevy truck parts f/s.

02-13-2011, 10:02 PM	#49
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 398	Re: 69/70 4wd gmc jimmy parts f/s [QUOTE=billsbowtie;4483897]4oldcars windshield has fog/smoke around edeges no breaks would only be good for a farm truck. rubber gasket it cut . chrome/trim is good driver shape.you should be able to get a new windshield for around $200.00. k5blazin could you get by with about any piece of the bed floor ? a piece about 18" by 12" or 24" by 12" piece. ASEASIDER pm returned.[/ Really looking for those areas due to the smaller rib closest to the bedsides. Thanks Posted via Mobile Device

02-13-2011, 11:35 PM	#50
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s k5blazin those rear pieces next to tail light i cut out for RIDDLA he got some of the bed floor with the pieces he needed. when/if i can get my camera to download pics. i will post some of whats left of bed floor. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.