IA 1970 Chevy C/20 Parting out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jce4isu · 02-11-2011, 12:58 PM

I will take the Alt bracket and I think I need shipping lol.
Posted via Mobile Device

Also put me in line for the fan shroud

Vintage Windmills · 02-11-2011, 03:25 PM

Whats the story on the bed, are you dismantling it and selling pieces? Does it have a steel floor you're harvesting for your longhorn? I could maybe use the box front if not rusted and some patch panels cut from the sides if the sides aren't too good but good in the area in front of wheels down low.

camrycurt · 02-11-2011, 05:02 PM

Would you consider removing and shipping the lower side trim molding and the tailgate molding? If yes, what would the shipped cost for all of that be to 20176?

Thanks!

**karphan** · 02-11-2011, 05:45 PM

I want the mirrors too. I think I'm third in line though. If it gets to me I'll take them shipped to 89441, Sparks, NV. Thanks.

burb71 · 02-11-2011, 06:16 PM

I need the coil off the engine and put me in line for the door panels, arm rests.

fasttech · 02-11-2011, 07:41 PM

Is the glove box door still available? If so how much are you asking?

jamesi20 · 02-11-2011, 08:01 PM

Could you give me a total on the throttle linkage and pedal to 44401.Thanks

**Dieselwrencher** · 02-11-2011, 11:08 PM

Ok guys, I'm going to try to go in order and get everyone their prices.

TooMuchStuff, Eric- 2 of the hub caps are nice, 2 are dented up and one of these 2 has a hole in it. How's $30 shipped for all four?

CaptRMW- Outside door handles aren't in too bad of shape. $35 shipped

Crig39- hasn't responded at all on pullies. Going to next in line which is FL71C10

FL71C10- Upper and lower pullies, Alt brackets, PS pump and pullies, $75 shipped

Hottrucks- Sorry, the door key isn't the same as the ignition. I will sell you all the lower trim with as many of the clips that will come off for $60 shipped.

C1069- Seat belts are all there, I will get them removed tomorrow and get pics taken of them. Arm rests are pretty nice with a little discoloration on one. $30 for the pair. Sunvisors are pretty nice, one needs some more cleaning on it. $30 for the pair as well. I'll give you the visor clips too. Shipping on the column will be $25 and the column is $25 and I should be able to ship the visors and arm rests seperate for $10. $120 without seat belts. I will give you a price on the seat belts when I get them out and post pics.

SJarrett71, Scott- The fan shroud is really nice. No breaks, or cracks. I think I can ship it for $20. $45 total

Tow Guys- I haven't gotten a good quote on the cowl yet. Mirrors sold to Tow Guys. Thanks.

LS1Nova71- The dash pad has normal curls at ends and a crack in the middle. $20 shipped. OBO

High RPM- Door panels $37 shipped

Projectjimmie68- $40 shipped on the cluster

If I missed anyone from the first page, let me know. If you think prices aren't right, just let me know. Thanks Ryan.

**Dieselwrencher** · 02-11-2011, 11:15 PM

Quote:

Originally Posted by jce4isu

I will take the Alt bracket and I think I need shipping lol.
Posted via Mobile Device

Also put me in line for the fan shroud

Joe, you're second in line for the alt bracket and for the shroud I believe.

**Dieselwrencher** · 02-11-2011, 11:18 PM

Quote:

Originally Posted by Vintage Windmills

Whats the story on the bed, are you dismantling it and selling pieces? Does it have a steel floor you're harvesting for your longhorn? I could maybe use the box front if not rusted and some patch panels cut from the sides if the sides aren't too good but good in the area in front of wheels down low.

I was just going to leave it on the truck to load it with scrap to get more out of it. It is a wood floor, and the sides aren't in that bad of shape really. If you need anymore pics let me know.

**Dieselwrencher** · 02-11-2011, 11:18 PM

Quote:

Originally Posted by camrycurt

Would you consider removing and shipping the lower side trim molding and the tailgate molding? If yes, what would the shipped cost for all of that be to 20176?

Thanks!

Yes I would, but you are second in line. If Hottrucks passes, you are next. Thanks Ryan.

**Dieselwrencher** · 02-11-2011, 11:19 PM

Quote:

Originally Posted by burb71

I need the coil off the engine and put me in line for the door panels, arm rests.

Coil $10 shipped. Will let you know if the others pass for door panels and arm rests. Thanks Ryan.

**Dieselwrencher** · 02-11-2011, 11:21 PM

Quote:

Originally Posted by fasttech

Is the glove box door still available? If so how much are you asking?

Yes it is $30 shipped. Thanks Ryan.

**Dieselwrencher** · 02-11-2011, 11:23 PM

Quote:

Originally Posted by jamesi20

Could you give me a total on the throttle linkage and pedal to 44401.Thanks

$40 shipped.

**Dieselwrencher** · 02-11-2011, 11:25 PM

Quote:

Originally Posted by Fesser

1. Put me in line for the steering column please.
2. Put me in line for all the stuff (locks, tumbler, trim) that Hottrucks asked about.
3. I'll take the steering wheel. Shipping to 94559.
Thanks

Steering wheel $40 shipped. Thanks Ryan.

tow guys · 02-11-2011, 11:26 PM

I'll take the mirrors at 95$ shipped. Paypal ok? Pm me your details and i'll get it done
Posted via Mobile Device

**Dieselwrencher** · 02-11-2011, 11:34 PM

Quote:

Originally Posted by tow guys

I'll take the mirrors at 95$ shipped. Paypal ok? Pm me your details and i'll get it done
Posted via Mobile Device

PM sent. Thanks Ryan.

**Dieselwrencher** · 02-11-2011, 11:47 PM

Here are some other things I haven't listed off of it as well.

Dealer installed engine stop cables with bracket for LH frame rail, and bracket that bolts to exhaust manifold. Sold to Karphan. Thanks Ryan.

Rear View Mirror assembly not the nicest mirror quality $15 shipped

Hood emblem $15 shipped

Marker lamps $20 shipped

7 blade fan with good clutch $40 shipped

1970 Chevy jack with handle and jack works $35 shipped.

**karphan** · 02-11-2011, 11:57 PM

I'll take the engine stop cables. PM sent.

68lowburb · 02-12-2011, 12:06 AM

quote on doors shipped to 70737 or baton rouge louisiana greyhound terminal thanks jimmy

**Dieselwrencher** · 02-12-2011, 12:27 AM

Quote:

Originally Posted by karphan

I'll take the engine stop cables. PM sent.

PM sent.

**Dieselwrencher** · 02-12-2011, 12:28 AM

Quote:

Originally Posted by 68lowburb

quote on doors shipped to 70737 or baton rouge louisiana greyhound terminal thanks jimmy

I'll call them tomorrow and see what they say. Thanks Ryan.

**karphan** · 02-12-2011, 12:39 AM

Payment made for engine stop cables. PM with address sent. Thanks, Dan

burb71 · 02-12-2011, 03:32 AM

Quote:

Originally Posted by Dieselwrencher

Coil $10 shipped. Will let you know if the others pass for door panels and arm rests. Thanks Ryan.

OK I'll take the coil and hold for arm rests.
Do you know when the truck was last running or on the road?

jce4isu · 02-12-2011, 03:50 AM

Quote:

Originally Posted by Dieselwrencher

Joe, you're second in line for the alt bracket and for the shroud I believe.

No prob I also need a drivers side window regulator if you dont sell the doors no big deal

Thanks
Posted via Mobile Device

02-11-2011, 12:58 PM	#26
jce4isu Registered User Join Date: Mar 2010 Location: Des Moines, IA Posts: 203	Re: 1970 Chevy C/20 Parting out I will take the Alt bracket and I think I need shipping lol. Posted via Mobile Device Also put me in line for the fan shroud __________________ 1972 build http://67-72chevytrucks.com/vboard/s...d.php?t=391344 Last edited by jce4isu; 02-11-2011 at 01:02 PM.

02-11-2011, 03:25 PM	#27
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 1970 Chevy C/20 Parting out Whats the story on the bed, are you dismantling it and selling pieces? Does it have a steel floor you're harvesting for your longhorn? I could maybe use the box front if not rusted and some patch panels cut from the sides if the sides aren't too good but good in the area in front of wheels down low. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-11-2011, 05:02 PM	#28
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: 1970 Chevy C/20 Parting out Would you consider removing and shipping the lower side trim molding and the tailgate molding? If yes, what would the shipped cost for all of that be to 20176? Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

02-11-2011, 05:45 PM	#29
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out I want the mirrors too. I think I'm third in line though. If it gets to me I'll take them shipped to 89441, Sparks, NV. Thanks.

02-11-2011, 06:16 PM	#30
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: 1970 Chevy C/20 Parting out I need the coil off the engine and put me in line for the door panels, arm rests. Last edited by burb71; 02-11-2011 at 06:24 PM.

02-11-2011, 07:41 PM	#31
fasttech Registered User Join Date: Mar 2008 Location: Houston Texas Posts: 77	Re: 1970 Chevy C/20 Parting out Is the glove box door still available? If so how much are you asking?

02-11-2011, 08:01 PM	#32
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 494	Re: 1970 Chevy C/20 Parting out Could you give me a total on the throttle linkage and pedal to 44401.Thanks

02-11-2011, 11:08 PM	#33
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: 1970 Chevy C/20 Parting out Ok guys, I'm going to try to go in order and get everyone their prices. TooMuchStuff, Eric- 2 of the hub caps are nice, 2 are dented up and one of these 2 has a hole in it. How's $30 shipped for all four? CaptRMW- Outside door handles aren't in too bad of shape. $35 shipped Crig39- hasn't responded at all on pullies. Going to next in line which is FL71C10 FL71C10- Upper and lower pullies, Alt brackets, PS pump and pullies, $75 shipped Hottrucks- Sorry, the door key isn't the same as the ignition. I will sell you all the lower trim with as many of the clips that will come off for $60 shipped. C1069- Seat belts are all there, I will get them removed tomorrow and get pics taken of them. Arm rests are pretty nice with a little discoloration on one. $30 for the pair. Sunvisors are pretty nice, one needs some more cleaning on it. $30 for the pair as well. I'll give you the visor clips too. Shipping on the column will be $25 and the column is $25 and I should be able to ship the visors and arm rests seperate for $10. $120 without seat belts. I will give you a price on the seat belts when I get them out and post pics. SJarrett71, Scott- The fan shroud is really nice. No breaks, or cracks. I think I can ship it for $20. $45 total Tow Guys- I haven't gotten a good quote on the cowl yet. Mirrors sold to Tow Guys. Thanks. LS1Nova71- The dash pad has normal curls at ends and a crack in the middle. $20 shipped. OBO High RPM- Door panels $37 shipped Projectjimmie68- $40 shipped on the cluster If I missed anyone from the first page, let me know. If you think prices aren't right, just let me know. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 02-11-2011 at 11:42 PM.

02-11-2011, 11:26 PM	#41
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: 1970 Chevy C/20 Parting out I'll take the mirrors at 95$ shipped. Paypal ok? Pm me your details and i'll get it done Posted via Mobile Device Last edited by tow guys; 02-11-2011 at 11:27 PM.

02-11-2011, 11:47 PM	#43
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: 1970 Chevy C/20 Parting out Here are some other things I haven't listed off of it as well. Dealer installed engine stop cables with bracket for LH frame rail, and bracket that bolts to exhaust manifold. Sold to Karphan. Thanks Ryan. Rear View Mirror assembly not the nicest mirror quality $15 shipped Hood emblem $15 shipped Marker lamps $20 shipped 7 blade fan with good clutch $40 shipped 1970 Chevy jack with handle and jack works $35 shipped. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 02-12-2011 at 12:45 AM.

02-11-2011, 11:57 PM	#44
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out I'll take the engine stop cables. PM sent.

02-12-2011, 12:06 AM	#45
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: 1970 Chevy C/20 Parting out quote on doors shipped to 70737 or baton rouge louisiana greyhound terminal thanks jimmy

02-12-2011, 12:39 AM	#48
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out Payment made for engine stop cables. PM with address sent. Thanks, Dan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.