AZ 72 Blazer for parts

[1956cameo]

Thanks for letting me know. Looks like I am going to have to go with repops. All the used ones I find either have rust or dents.

[Critter]

Originally Posted by D.PASSMORE

Tom, would you strip the guts and ship doors?

Originally Posted by t korinek

PASSMORE I can do that, let me get the doors off & get better pics of the bottoms

Also if you are going to strip the doors I would like to have the vent window bracing screws and plastic rings if they are there.

These...

[t korinek]

Heres some pics windshield frame in nice shape.
Driver door is questionable, it looks like the hinge area was welded on.
Passenger door ok, a few dents, mostly on the inside at top of door. a little rust in the bottom, still plenty of metal to work with.

[t korinek]

heres more pics

[t korinek]

& more of the door

[t korinek]

more

[Critter]

Thanks for the pics. Just to make sure, is everything in these 2 pics just surface rust, not pitting? It appears to be in pretty good shape.



How do we go about shipping, hopefully that's an option. PM me if you like. Also is the door hardware I mentioned earlier available? Thanks.

[t korinek]

Critter, its all just surface rust, no heavy stuff, I took as many pics as I could. there is only one plastic plug & screw. I'll ship of course, the price of shipping goes up depending on how much of the pillars you need.
Tom

[crr26@cox.net]

how much for shipping on windshield frame to abbeville louisiana 70510

[Critter]

PM sent

[D.PASSMORE]

Thanks Tom, I need a little better set. I'll pass on those. Got anything else in your endless inventory?

[t korinek]

PASSMORE, no other good doors right now, they just keep getting worse.

crr26@cox.net, Critter has first shot at the windshield frame, if he decides he doesn't want it shipping would be $50 for the frame cut 1/2 way down the pillars, $100 cut all the way at the bottom.

Critter your up on the windshield frame.

[Critter]

I went and took a long look at mine today, I actually don't need the windshield top (blazer specific area) I need some of the lower areas around the bottom of the windshield, aka I can get them off a truck cab locally and save the shipping cost. So I guess I will pass this to crr26. Thanks for the info.

[D.PASSMORE]

I'll get in line for Wind sheild frame.

[nick70]

Originally Posted by t korinek

Nick70, heres a pic of the hubs on it

Sharpie how about $130 shipped for all that

I'll pass on the hubs. Thanks

[crr26@cox.net]

ill pass to dpassmore

[t korinek]

David, your up on the windshield frame, its in very good shape, let me know how much you would need, for a more accurate shipping quote
Tom
Nick70 no problem, I don't have any others right now.
Critter, let me know if you cannot find the parts local.

[71blksuper4x4]

Originally Posted by 71blksuper4x4

Tom, how is the chrome on the lockout hubs? Any deep gouges or pitting? Price? Thanks Trevor

Also, how much for the bucket seat floor braces?

Side note, got the 4 wheel drive emblems. Thanks Trevor

[t korinek]

Trevor, will have to check to see if the seat brackets are rusted off there, heres some pics of the hubs, they have some marks, dings etc

[D.PASSMORE]

Sent you a PM...

[Yellow93Z71]

If D.PASSMORE passes on the windshield frame I'll take it. If not let me know if you have any others, mines pretty whooped... Thanks!

[hgs_notes]

I found some local patches for the bed, thanks.

[lgdpt]

passenger side rocker panel cover and bolts?

[Mog]

What shape are the front axle, rotors, spindles, etc in? Looking to convert my 1970 K5 to front discs. Everyone says the best way is to take a front end that already has discs.

Thanks,
Steve

[t korinek]

mog, I have a front end that just came from a running driving 71 blazer, $175 for all the outer parts & axles + shipping
lgdpt I'll have to check that panel for rust

DAVID PASSMORE pics of the windshield frame , under the corners