Identify engine - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 04-25-2011, 09:54 PM

What is the stall on your torque convertor?
Posted via Mobile Device

bigtruckboi2000 · 04-25-2011, 09:58 PM

I forgot to put that at idle-300-400 rpm after warm-up.

bigtruckboi2000 · 04-25-2011, 10:19 PM

Quote:

Originally Posted by 1Bad62Pro/Street

What is the stall on your torque convertor?
Posted via Mobile Device

Don't know. I had it rebuilt 3 years ago and the guy said something about putting a mild shift kit in it though, but I couldn't tell you exactly. Here is a pic of the work order with all the parts put on.

Name: IMAG0070[1].jpg
Views: 34
Size: 79.2 KB

Name: IMAG0070[1].jpg
Views: 34
Size: 79.2 KB

bigtruckboi2000 · 04-25-2011, 10:22 PM

Quote:

Originally Posted by cableguy0

If your only turning 2600 rpm at 75mph a 700r4 is not going to help you gain mileage. I would start with a full tune up. Make sure the plugs are gapped correctly at .045 and that you have the right plugs. I would make sure the timing is set right and get an ignition curve kit to set the timing curve properly and get the most out of what you got.

Thanks for the info cable guy, the tune-up is next.

bigtruckboi2000 · 04-25-2011, 10:41 PM

Actually after doing a lil bit of reading and research it's a TH400 transmission.

04-25-2011, 09:54 PM	#26
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Identify engine What is the stall on your torque convertor? Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

04-25-2011, 09:58 PM	#27
bigtruckboi2000 Registered User Join Date: Apr 2011 Location: Camp Lejeune, NC Posts: 97	Re: Identify engine I forgot to put that at idle-300-400 rpm after warm-up. __________________ [B][I]1965 Chevy C10 SWB w/350(68-79), 305 H.O Heads, Edelbrock Performer 1406 600 cfm carb, Torquer II Manifold, AC Delco HEI, TH400, Flowmasters,3.07 gears 2005 GMC Yukon XL Denali w/Mangnaflow Exhaust 1983 Cutlass Supreme w/ 350, cam, Holley 650 cfm, Street Dominator intake, carb spacer, hydromatic, Flowmasters *Patriots always talk of dying for their country but never of killing for their country.*

04-25-2011, 10:41 PM	#30
bigtruckboi2000 Registered User Join Date: Apr 2011 Location: Camp Lejeune, NC Posts: 97	Re: Identify engine Actually after doing a lil bit of reading and research it's a TH400 transmission. __________________ [B][I]1965 Chevy C10 SWB w/350(68-79), 305 H.O Heads, Edelbrock Performer 1406 600 cfm carb, Torquer II Manifold, AC Delco HEI, TH400, Flowmasters,3.07 gears 2005 GMC Yukon XL Denali w/Mangnaflow Exhaust 1983 Cutlass Supreme w/ 350, cam, Holley 650 cfm, Street Dominator intake, carb spacer, hydromatic, Flowmasters *Patriots always talk of dying for their country but never of killing for their country.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.