TN Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70BLAZERX2 · 09-27-2011, 11:18 AM

Quote:

Originally Posted by bigboi

let me see if i can line up enough ducks

no problem..just let me know..

Jaros44sr speedometer is going out this afternoon..Thank you

**clay68c10** · 09-28-2011, 11:05 PM

Does the TBI have the flexible fuel lines?
How much for the air cleaner spacer too?

70BLAZERX2 · 09-30-2011, 03:25 PM

Quote:

Originally Posted by clay68c10

Does the TBI have the flexible fuel lines?
How much for the air cleaner spacer too?

I will have to look and see if a got a piar of TBI lines..I know i hae the vortec ones..that are straight up near firewall..

I have some..let me look over the weekend here..

if i do ..$45 shipped with the air cleaner spacer. I have 10+ of those..lol

gr8one · 09-30-2011, 09:51 PM

Quote:

Originally Posted by 70BLAZERX2

I have several setups here

if you just need the alt/ps bracket and the a/c bracket $75 shipped

complete setup,brackets with a/c comp,alt,ps pump,fan,pullies,bolts..$200 shipped

do they come with the idle pullies can you send pics to ffnels@aol.com, shipping to 33841 i looking for the following casting numbers 10118701 (driver's side) and 10118751 (passenger side).

**clay68c10** · 10-01-2011, 01:06 AM

If u can find em I'll go $45 shipped with the spacer.
Thanks

Kurt L · 10-01-2011, 01:11 AM

how much for the fuse box cover? and the cover under the steering wheel?

FritzA · 10-01-2011, 10:45 AM

I'm looking for the bracket that holds the charcoal canister. Not the cnister, the bracket that goes around it and bolts to the front of the compartment by the radiator.

70BLAZERX2 · 10-01-2011, 01:33 PM

Quote:

Originally Posted by Kurt L

how much for the fuse box cover? and the cover under the steering wheel?

what color do you need them in? i have a few on them

70BLAZERX2 · 10-01-2011, 01:34 PM

Quote:

Originally Posted by FritzA

I'm looking for the bracket that holds the charcoal canister. Not the cnister, the bracket that goes around it and bolts to the front of the compartment by the radiator.

let me get my hands on one..i will get back to you. I know its there..just the bracket ..no problem

**clay68c10** · 10-09-2011, 04:36 PM

Any luck with the flex lines?

Camaro_nut2001 · 10-10-2011, 02:58 PM

I need a good complete Throttle Body, stock breather with hose & also an Alternator with the back brace for my '89 Silverado K1500. I'm not that far from Greeneville so I could pick them up if you have em. Thanks, Ted.

70BLAZERX2 · 10-10-2011, 07:15 PM

Quote:

Originally Posted by clay68c10

Any luck with the flex lines?

this 90 didnt have the braided lines on it? they were solid from the fuel filter up to TBI,Sorry

70BLAZERX2 · 10-10-2011, 07:19 PM

Quote:

Originally Posted by Camaro_nut2001

I need a good complete Throttle Body, stock breather with hose & also an Alternator with the back brace for my '89 Silverado K1500. I'm not that far from Greeneville so I could pick them up if you have em. Thanks, Ted.

I have a 350 TBI unit
stock breather and hose
and a good alt. (5) lol of those..

I will have to look for the back brace..i should have it..$50 you pick up here.

Camaro_nut2001 · 10-12-2011, 12:40 AM

Quote:

Originally Posted by 70BLAZERX2

I have a 350 TBI unit
stock breather and hose
and a good alt. (5) lol of those..

I will have to look for the back brace..i should have it..$50 you pick up here.

Ok great! PM sent for directions.

**clay68c10** · 10-12-2011, 11:43 PM

No problem. Those flex lines are getting hard to find these days.

rsmarr1982 · 10-13-2011, 01:59 PM

hows the driver door?

70BLAZERX2 · 10-13-2011, 05:29 PM

Quote:

Originally Posted by FritzA

I'm looking for the bracket that holds the charcoal canister. Not the cnister, the bracket that goes around it and bolts to the front of the compartment by the radiator.

I have that $15 shipped..its off the 90..88-94 are all the same

70BLAZERX2 · 10-13-2011, 05:32 PM

Quote:

Originally Posted by rsmarr1982

hows the driver door?

door has been sold

I need to update the list..not much left of this one.

Nice tailgate..$50
front bumper ,has to holes in top for fog lites $40

I have a 3.08 open rear end..for $150 2wd

I also have a gold hood and passenger fender..and a gold GMC tailgate..

I will be getting another 88-98 truck for parts within a few weeks.

if you need ,please ask..I have shelves full of 88-98 stuff..also.

thohill · 10-18-2011, 07:43 PM

How much for tape unit w/ equalizer?

70BLAZERX2 · 10-18-2011, 07:55 PM

Quote:

Originally Posted by thohill

How much for tape unit w/ equalizer?

Update..only thing i have left of this 90 is a good tailgate and a front bumper..

everything on it has sold..

chinquipin · 10-22-2011, 09:50 PM

Still have the seat? If so What kind of shape is it in?

chinquipin · 10-22-2011, 09:51 PM

Sorry, I obviously didn't read your last post.

09-28-2011, 11:05 PM	#27
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd Does the TBI have the flexible fuel lines? How much for the air cleaner spacer too? __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

10-01-2011, 01:06 AM	#30
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd If u can find em I'll go $45 shipped with the spacer. Thanks __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

10-01-2011, 01:11 AM	#31
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd how much for the fuse box cover? and the cover under the steering wheel?

10-01-2011, 10:45 AM	#32
FritzA Registered User Join Date: Jul 2009 Location: Denver Burbs, CO Posts: 116	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd I'm looking for the bracket that holds the charcoal canister. Not the cnister, the bracket that goes around it and bolts to the front of the compartment by the radiator.

10-09-2011, 04:36 PM	#35
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd Any luck with the flex lines? __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

10-10-2011, 02:58 PM	#36
Camaro_nut2001 Chevy Lover Till The End. Join Date: Dec 2009 Location: Mascot TN. Posts: 795	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd I need a good complete Throttle Body, stock breather with hose & also an Alternator with the back brace for my '89 Silverado K1500. I'm not that far from Greeneville so I could pick them up if you have em. Thanks, Ted. __________________ 1969 Chevy SWB Big Block - Under the knife as of 12/26/2011 1989 Chevy Silverado, 4X4 - Daily Driver 1996 Chevy Suburban K1500 - 4-Wheeler, Campin Truck 1968 Chevrolet Impala Sport Coupe - 327/350hp, TH400, all original. Members I've met: BamaBaxter, My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=500359 Last edited by Camaro_nut2001; 10-10-2011 at 03:08 PM. Reason: Didn't add a part I needed.

10-12-2011, 11:43 PM	#40
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd No problem. Those flex lines are getting hard to find these days. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

10-13-2011, 01:59 PM	#41
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd hows the driver door? __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

10-18-2011, 07:43 PM	#44
thohill Registered User Join Date: Sep 2011 Location: United States Posts: 19	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd How much for tape unit w/ equalizer?

10-22-2011, 09:50 PM	#46
chinquipin Registered User Join Date: Jun 2011 Location: East Tennessee Posts: 35	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd Still have the seat? If so What kind of shape is it in?

10-22-2011, 09:51 PM	#47
chinquipin Registered User Join Date: Jun 2011 Location: East Tennessee Posts: 35	Re: Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd Sorry, I obviously didn't read your last post.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.