Dubb907 72 Chevy swb Dropmember - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock68 · 02-22-2013, 02:06 PM

going to be a nice truck!! coming down in april??

ddubbs · 02-23-2013, 03:14 AM

Quote:

Originally Posted by bigblock68

going to be a nice truck!! coming down in april??

Haven't decided if I'm going to go in April. Guess I better figure it out real soon. You going to be setup there again? Had a change off plans on my truck. Was going to run my ram jet 502 but decided to run a 383 instead. Just want something to cruise and easy on gas.
Posted via Mobile Device

smoknbarrels · 02-23-2013, 01:20 PM

Quote:

Originally Posted by ddubbs

... Was going to run my ram jet 502 but decided to run a 383 instead. Just want something to cruise and easy on gas.

thats too bad in a way, but still gonna have plenty of grunt and this way you'll only have to hit 2/3 of the gas satations instead of each one.
Posted via Mobile Device
Posted via Mobile Device

thespiffy53 · 03-01-2013, 04:22 AM

Wow!! Another dropmember truck in Alaska. Theres only a couple of us up here in the last frontier rockin porterbuilt!!! Im doing a '69 w/ C4 front dropmember and rear extreme. rolling chassis done. bout to install my LS/4l60E. Im in Anchorage. where in AK are you at??

CC69Rat · 03-01-2013, 09:11 AM

subscribed for sure ! Wow, it looks cold there.

Great looking trucks and attention to detail.

**Zane'sMom** · 03-11-2013, 12:38 AM

Cool build thread, ddubbs; subscribed!

ddubbs · 03-12-2013, 01:32 PM

Quote:

Originally Posted by thespiffy53

Wow!! Another dropmember truck in Alaska. Theres only a couple of us up here in the last frontier rockin porterbuilt!!! Im doing a '69 w/ C4 front dropmember and rear extreme. rolling chassis done. bout to install my LS/4l60E. Im in Anchorage. where in AK are you at??

Located in Fairbanks. Just picked up a Ls out of anchorage for my wife's 56.

Posted via Mobile Device

ddubbs · 03-12-2013, 05:47 PM

Posted via Mobile Device
Got motor and tranny installed for mock up. Started disassembling the 72 off the old frame.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

ddubbs · 03-12-2013, 05:54 PM

Posted via Mobile Device
Posted via Mobile Device
Me and my friend jimmy pulled the front clip,bed & cab last week.
Posted via Mobile Device
Posted via Mobile Device

ddubbs · 03-12-2013, 06:02 PM

Posted via Mobile Device
Posted via Mobile Device
Got the cab set and had to do some work to the floor for the body drop. Also got my new axles installed. Things are moving a little faster than last summer. Still just working on getting truck body mocked up.
Posted via Mobile Device
Posted via Mobile Device

ddubbs · 03-12-2013, 06:06 PM

Quote:

Originally Posted by Zane'sMom

Cool build thread, ddubbs; subscribed!

Thanks. Looking forward to Zane's ride.

Posted via Mobile Device

ddubbs · 03-12-2013, 06:41 PM

I will post some more pics in a few days. It's been a challenge setting the cab and bed by myself. Lol
Posted via Mobile Device

ddubbs · 03-13-2013, 12:35 AM

Posted via Mobile Device
Notched my floor for the body drop. Started working on a trans hump out of fiberglass. Still have some more glass to lay out. Not quite sure if I'm going to us or just cut up my high hump and make it work.
Posted via Mobile Device

ddubbs · 03-13-2013, 12:39 AM

Posted via Mobile Device
Got some wheels on it to set it down on the floor.
Posted via Mobile Device

ddubbs · 03-13-2013, 01:38 PM

Got my Porterbuilt hood hinges on!!!

Posted via Mobile Device

ddubbs · 03-13-2013, 01:53 PM

Decided to sit the bed on the frame to see about making a frame to raise the bed floor. Sometimes you have to come up with some pretty ingenious ways to do stuff by yourself!!!

Posted via Mobile Device
Posted via Mobile Device

**67cheby** · 03-13-2013, 03:51 PM

looking GREAT !

ddubbs · 03-13-2013, 04:44 PM

Quote:

Originally Posted by 67cheby

looking GREAT !

Thanks 67cheby!!! Been a long slow process.
Posted via Mobile Device

ddubbs · 03-13-2013, 11:31 PM

Quote:

Originally Posted by thespiffy53

Wow!! Another dropmember truck in Alaska. Theres only a couple of us up here in the last frontier rockin porterbuilt!!! Im doing a '69 w/ C4 front dropmember and rear extreme. rolling chassis done. bout to install my LS/4l60E. Im in Anchorage. where in AK are you at??

How come you haven't started a build thread? Would like to see it.

Posted via Mobile Device

~Whitey~ · 03-14-2013, 12:16 AM

Looking good ddubbs. I'm going follow along... That yellow 68 is a beauty.
Can't wait to see what all you do with this.
Posted via Mobile Device

Dinos63 · 03-14-2013, 01:41 AM

dig it!! nice work

ddubbs · 03-15-2013, 12:46 AM

Quote:

Originally Posted by Dinos63

dig it!! nice work

Thanks Dino. Man your new truck is sweet!!! Keepin a eye on that build.

Posted via Mobile Device

YBNORML · 03-15-2013, 01:38 AM

WOW! You're really moving along. Nice work!
Posted via Mobile Device

ddubbs · 03-15-2013, 01:45 AM

Quote:

Originally Posted by YBNORML

WOW! You're really moving along. Nice work!
Posted via Mobile Device

Not really. Still in mockup. Was going to start on raised bed floor but worked on getting the shop clean today. Was hoping to get started tomorrow but we are going to work on my buddies rail truck. Anyways CONGRATS on the new addition to the family.

Posted via Mobile Device

YBNORML · 03-15-2013, 01:48 AM

Quote:

Originally Posted by ddubbs

Not really. Still in mockup. Was going to start on raised bed floor but worked on getting the shop clean today. Was hoping to get started tomorrow but we are going to work on my buddies rail truck. Anyways CONGRATS on the new addition to the family.

Posted via Mobile Device

Thanks. I hear ya on the mockup stage. Mines been in mockup for more years than I care to remember

Posted via Mobile Device

02-22-2013, 02:06 PM	#26
bigblock68 Registered User Join Date: Sep 2007 Location: vancouver,wa. Posts: 282	Re: Dubb907 72 Chevy swb Dropmember going to be a nice truck!! coming down in april??

03-01-2013, 04:22 AM	#29
thespiffy53 Registered User Join Date: Dec 2007 Location: Anchorage Alaska Posts: 1	Re: Dubb907 72 Chevy swb Dropmember Wow!! Another dropmember truck in Alaska. Theres only a couple of us up here in the last frontier rockin porterbuilt!!! Im doing a '69 w/ C4 front dropmember and rear extreme. rolling chassis done. bout to install my LS/4l60E. Im in Anchorage. where in AK are you at??

03-01-2013, 09:11 AM	#30
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,213	Re: Dubb907 72 Chevy swb Dropmember subscribed for sure ! Wow, it looks cold there. Great looking trucks and attention to detail. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-11-2013, 12:38 AM	#31
Zane'sMom Senior Member Join Date: Jan 2013 Location: Fairbanks, Alaska Posts: 214	Re: Dubb907 72 Chevy swb Dropmember Cool build thread, ddubbs; subscribed! __________________ 'Zane's Ride', a fundraiser to benefit Make-A-Wish Alaska in honor of my son Zane. I miss you, sweetheart! Zane Jacobsen, 9/1992-12/2011

03-12-2013, 05:47 PM	#33
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Posted via Mobile Device Got motor and tranny installed for mock up. Started disassembling the 72 off the old frame. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-12-2013, 05:54 PM	#34
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Posted via Mobile Device Posted via Mobile Device Me and my friend jimmy pulled the front clip,bed & cab last week. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-12-2013, 06:02 PM	#35
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Posted via Mobile Device Posted via Mobile Device Got the cab set and had to do some work to the floor for the body drop. Also got my new axles installed. Things are moving a little faster than last summer. Still just working on getting truck body mocked up. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-12-2013, 06:41 PM	#37
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember I will post some more pics in a few days. It's been a challenge setting the cab and bed by myself. Lol Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-13-2013, 12:35 AM	#38
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Posted via Mobile Device Notched my floor for the body drop. Started working on a trans hump out of fiberglass. Still have some more glass to lay out. Not quite sure if I'm going to us or just cut up my high hump and make it work. Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-13-2013, 12:39 AM	#39
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Posted via Mobile Device Got some wheels on it to set it down on the floor. Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-13-2013, 01:38 PM	#40
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Got my Porterbuilt hood hinges on!!! Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-13-2013, 01:53 PM	#41
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Dubb907 72 Chevy swb Dropmember Decided to sit the bed on the frame to see about making a frame to raise the bed floor. Sometimes you have to come up with some pretty ingenious ways to do stuff by yourself!!! Posted via Mobile Device Posted via Mobile Device Attached Images __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-13-2013, 03:51 PM	#42
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Dubb907 72 Chevy swb Dropmember looking GREAT ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-14-2013, 12:16 AM	#45
~Whitey~ Registered User Join Date: Jun 2011 Location: Springfield, MO Posts: 677	Re: Dubb907 72 Chevy swb Dropmember Looking good ddubbs. I'm going follow along... That yellow 68 is a beauty. Can't wait to see what all you do with this. Posted via Mobile Device __________________ Jimmy .69SWB Build.

03-14-2013, 01:41 AM	#46
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Dubb907 72 Chevy swb Dropmember dig it!! nice work __________________ CHEVY ONLY... Nothin Else !



Register or Log In To remove these advertisements.

03-15-2013, 01:38 AM	#48
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Dubb907 72 Chevy swb Dropmember WOW! You're really moving along. Nice work! Posted via Mobile Device __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

Register or Log In To remove these advertisements.