AZ 69 suburban body for parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 04-01-2012, 10:59 PM

OK, I'll get some ship prices monday
Thanks,
Tom

sunk99 · 04-02-2012, 01:12 PM

Interested in both front rockers over to the floorpans including the channel that the rubber weather stripping sets in and the passenger side windshield post from top to the upper door hinge,also need the floorboard where the two balls that the gas pedal snaps on are (one of mine is completely missing ). Shipping to knoxville Tn. 37931 thanks Scott 865-406-9665
Posted via Mobile Device

Marc33 · 04-02-2012, 02:48 PM

I'm out on this one. Found a local one that I can cut up.

**t korinek** · 04-02-2012, 02:53 PM

OK Mark, thanks for letting me know
sunk 99, the passenger side rocker was replaced, i'll look at the driver rocker
& how much area around the gas pedal nubs did you need?

sunk99 · 04-02-2012, 03:01 PM

Quote:

Originally Posted by t korinek

OK Mark, thanks for letting me know
sunk 99, the passenger side rocker was replaced, i'll look at the driver rocker
& how much area around the gas pedal nubs did you need?

Trans tunnel to about 3" beyond them. What about windshield post?
Posted via Mobile Device

**kev2809** · 04-02-2012, 03:29 PM

do you have any gas pedal studs left? looks like the one on this one was removed. i need 4 total..thanks

**t korinek** · 04-02-2012, 11:41 PM

kev2809 I have 1 new pair of studs & may have 1 used pair, will check.

sunk99 windshield post & floor patch around throttle area $50 + $18 shipping $68 total

Slinger60 Both patch pieces $60 + $15 shipping The tail gate trim $20 + $13 shipping There is 1 ding in it see pic. $108 total

richard2717 both tail light cuts $70 + $45 shipping $115 total

**richard2717** · 04-02-2012, 11:53 PM

I will take them send me your payment info please
Richard

Slinger60 · 04-03-2012, 12:07 AM

Ok. I will take patches and molding send payment info. Thanks again Shawn

sunk99 · 04-03-2012, 12:28 AM

need the studs also so if you do not have them Ill pass on the floor area,but I want the windshield post so send me your payment info. Thanks

Whittaker · 04-03-2012, 08:41 AM

If I was wondering about the whole passenger door frames front and rear extending around it 4 " or so on top and bottom and sides. Is there no passenger side doors?

Slinger60 · 04-03-2012, 09:19 AM

Payment sent. Thanks Shawn

**richard2717** · 04-03-2012, 01:05 PM

Payment sent.
Thanks
Richard

**richard2717** · 04-03-2012, 09:15 PM

Tom,
Any chance the sheet metal area around the gas neck is good and rust free? What would it cost to add to my order? I will take as big an area as you can ship feasably.

Richard

**kev2809** · 04-03-2012, 09:17 PM

Quote:

Originally Posted by t korinek

kev2809 I have 1 new pair of studs & may have 1 used pair, will check.l

Sounds good...lmk, thanks
Posted via Mobile Device

**t korinek** · 04-03-2012, 11:35 PM

Whittaker, I have already sold the front passenger pillar, for everything else $100 + shipping.
I have sold the front passenger door & the3rd door has some rust in it.
Thanks,
Tom

**t korinek** · 04-05-2012, 11:13 AM

sunk99, i'm cutting this up today, did you want the parts?
Slinger60 & richard2717 received paypal, will possibly ship on friday.
Thanks,
Tom

sunk99 · 04-05-2012, 11:34 AM

Yes can you send me your paypal info please? Thanks
Posted via Mobile Device

sunk99 · 04-05-2012, 12:02 PM

Sorry I missed already had your info, payment sent via paypal. Thanks....... Scott
QUOTE=t korinek;5295614]sunk99, i'm cutting this up today, did you want the parts?
Slinger60 & richard2717 received paypal, will possibly ship on friday.
Thanks,
Tom[/QUOTE]
Posted via Mobile Device

**t korinek** · 04-05-2012, 11:08 PM

sunk99, received your paypal, cut off all parts today, I wont be able to get them shipped until monday.
Thanks,
Tom

sunk99 · 04-05-2012, 11:36 PM

OK thanks

**kev2809** · 04-09-2012, 09:57 AM

Any word on the ball studs?

Thanks
Posted via Mobile Device

**t korinek** · 04-12-2012, 03:11 AM

kev2809 I have 2 new & 2 used $20 shipped for all 4

**kev2809** · 04-12-2012, 06:00 AM

sounds good..send your paypal and i will get it to you today.

thanks

**D.PASSMORE** · 04-12-2012, 07:14 AM

Quote:

Originally Posted by D.PASSMORE

Windshield trim - What kinda shape? Is it the deep lip type?

PM sent on winsheild trim...

04-01-2012, 10:59 PM	#26
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts OK, I'll get some ship prices monday Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-02-2012, 01:12 PM	#27
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 69 suburban body for parts Interested in both front rockers over to the floorpans including the channel that the rubber weather stripping sets in and the passenger side windshield post from top to the upper door hinge,also need the floorboard where the two balls that the gas pedal snaps on are (one of mine is completely missing ). Shipping to knoxville Tn. 37931 thanks Scott 865-406-9665 Posted via Mobile Device

04-02-2012, 02:48 PM	#28
Marc33 Registered User Join Date: Feb 2010 Location: San Marcos, Ca Posts: 109	Re: 69 suburban body for parts I'm out on this one. Found a local one that I can cut up. __________________ Current stable: 1970 K5 Blazer 4x4 1972 K5 Blazer 4x4 SOLD: 1971 GMC Sierra Grande 2500 2wd 1972 Chevrolet K5 Blazer 1966 Chevrolet C20 1972 Chevy Suburban 4x4 1500 1956 Chevy 150 2 door post 1956 Chevy 2 door post bel air 1968 Chevrolet C20 1958 Ford Thunderbird 1968 4x4 Suburban 1/2 ton

04-02-2012, 02:53 PM	#29
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts OK Mark, thanks for letting me know sunk 99, the passenger side rocker was replaced, i'll look at the driver rocker & how much area around the gas pedal nubs did you need? __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-02-2012, 03:29 PM	#31
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: 69 suburban body for parts do you have any gas pedal studs left? looks like the one on this one was removed. i need 4 total..thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-02-2012, 11:41 PM	#32
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts kev2809 I have 1 new pair of studs & may have 1 used pair, will check. sunk99 windshield post & floor patch around throttle area $50 + $18 shipping $68 total Slinger60 Both patch pieces $60 + $15 shipping The tail gate trim $20 + $13 shipping There is 1 ding in it see pic. $108 total richard2717 both tail light cuts $70 + $45 shipping $115 total Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-02-2012, 11:53 PM	#33
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,159	Re: 69 suburban body for parts I will take them send me your payment info please Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-03-2012, 12:07 AM	#34
Slinger60 Registered User Join Date: Jul 2011 Location: Redding Ca. Posts: 207	Re: 69 suburban body for parts Ok. I will take patches and molding send payment info. Thanks again Shawn __________________ 1969 C10 LWB GMC. 1970 K5 Blazer 1971 K10 Burb Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=529970 Shawn

04-03-2012, 12:28 AM	#35
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 69 suburban body for parts need the studs also so if you do not have them Ill pass on the floor area,but I want the windshield post so send me your payment info. Thanks

04-03-2012, 08:41 AM	#36
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: 69 suburban body for parts If I was wondering about the whole passenger door frames front and rear extending around it 4 " or so on top and bottom and sides. Is there no passenger side doors?

04-03-2012, 09:19 AM	#37
Slinger60 Registered User Join Date: Jul 2011 Location: Redding Ca. Posts: 207	Re: 69 suburban body for parts Payment sent. Thanks Shawn __________________ 1969 C10 LWB GMC. 1970 K5 Blazer 1971 K10 Burb Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=529970 Shawn

04-03-2012, 01:05 PM	#38
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,159	Re: 69 suburban body for parts Payment sent. Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-03-2012, 09:15 PM	#39
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,159	Re: 69 suburban body for parts Tom, Any chance the sheet metal area around the gas neck is good and rust free? What would it cost to add to my order? I will take as big an area as you can ship feasably. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-03-2012, 11:35 PM	#41
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts Whittaker, I have already sold the front passenger pillar, for everything else $100 + shipping. I have sold the front passenger door & the3rd door has some rust in it. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-05-2012, 11:13 AM	#42
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts sunk99, i'm cutting this up today, did you want the parts? Slinger60 & richard2717 received paypal, will possibly ship on friday. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 04-05-2012 at 11:16 AM. Reason: more info



Register or Log In To remove these advertisements.

04-05-2012, 11:34 AM	#43
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 69 suburban body for parts Yes can you send me your paypal info please? Thanks Posted via Mobile Device

04-05-2012, 12:02 PM	#44
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 69 suburban body for parts Sorry I missed already had your info, payment sent via paypal. Thanks....... Scott QUOTE=t korinek;5295614]sunk99, i'm cutting this up today, did you want the parts? Slinger60 & richard2717 received paypal, will possibly ship on friday. Thanks, Tom[/QUOTE] Posted via Mobile Device

04-05-2012, 11:08 PM	#45
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts sunk99, received your paypal, cut off all parts today, I wont be able to get them shipped until monday. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-05-2012, 11:36 PM	#46
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 69 suburban body for parts OK thanks

04-09-2012, 09:57 AM	#47
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: 69 suburban body for parts Any word on the ball studs? Thanks Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-12-2012, 03:11 AM	#48
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: 69 suburban body for parts kev2809 I have 2 new & 2 used $20 shipped for all 4 __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-12-2012, 06:00 AM	#49
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: 69 suburban body for parts sounds good..send your paypal and i will get it to you today. thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.