Onboard Air install with a York Compressor. Start to finish - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Realnoisy · 02-17-2013, 10:10 AM

Quote:

Originally Posted by Sick5

so.... anyone got theres done!

Sick5, congrats on the new engine! I was meaning to ask you, what kinda' valves are you using?

david72 · 02-16-2013, 11:44 PM

I just picked up a compressor today. I should hopefully be caught up this week and get started on figuring some configurations out. Any preference to driver or passenger side mount? I have read about the oiling mods needed for one way, ill read up on that some more!! Also a long or short water pump will make a difference. My truck has a short on it now, I guess ill start with that set up.
Posted via Mobile Device

Realnoisy · 02-17-2013, 10:06 AM

Quote:

Originally Posted by david72

I just picked up a compressor today. I should hopefully be caught up this week and get started on figuring some configurations out. Any preference to driver or passenger side mount? I have read about the oiling mods needed for one way, ill read up on that some more!! Also a long or short water pump will make a difference. My truck has a short on it now, I guess ill start with that set up.
Posted via Mobile Device

David72, I don't think it matters on which side you mount it. I have the room to mount on the drivers side of the engine. I've been working on the "Z" the last couple of weekends and haven't had time to work with my compressor. Also, I have been meaning to call you but I've just been so busy. I'll try this weekend.

Sick5 · 02-18-2013, 12:04 PM

Were can I find info on this mod for the york
Posted via Mobile Device

Realnoisy · 02-19-2013, 09:00 AM

Quote:

Originally Posted by Sick5

Were can I find info on this mod for the york
Posted via Mobile Device

Here's a link I found that is very informative...http://www.hummer4x4offroad.com/foru...tart-to-finish

Sick5 · 02-18-2013, 12:06 PM

Thanks
Blitz valve they work great had them for six years. Time for a change I might just go accuair or manual vavles
Posted via Mobile Device

dr69burb · 03-08-2013, 12:13 PM

Any updates on your york set up?
Posted via Mobile Device

Realnoisy · 03-08-2013, 12:21 PM

Quote:

Originally Posted by dr69burb

Any updates on your york set up?
Posted via Mobile Device

Nope...I have to start making the bracket. I do have a question for you that I'll PM.

Sick5 · 03-08-2013, 07:29 PM

anyone of you guys running power steering pump?

Realnoisy · 03-09-2013, 08:53 AM

Yes, I am.

david72 · 03-09-2013, 02:45 PM

sorry guys, been slackin too!! got held up on another big job that I'm tryin to get out of the shop to free up some space for the truck to roll in. I did get a chance to start drawing up a bracket set up in cad. Unfortunately that's about as far as I've made it. We did just get our porterbuilt rear x member in! So now the fun begins with that hopefully after I'm done bending up the tubing on this project!

Sick5 · 03-09-2013, 11:53 PM

heres mine but with out the power steering pump. I may change it and move it higher so i can add the power steering pump

dr69burb · 03-10-2013, 12:14 AM

Nice set up sick 5.
Posted via Mobile Device

Realnoisy · 03-10-2013, 06:22 AM

Yea, I like it too! That looks like the original bracket that has been modified. I have my original bracket maybe I can do something like you have.

gixxer711 · 03-11-2013, 11:57 PM

hey realnoisy. david has the chassis for my new 64. i think you emailed me awhile back when i had an ad on craigslist for doors or something. maybe we can setup a weekend and you can ride out to davids with me. he has all the cool tools!
Posted via Mobile Device

Realnoisy · 03-12-2013, 06:25 AM

Quote:

Originally Posted by gixxer711

hey realnoisy. david has the chassis for my new 64. i think you emailed me awhile back when i had an ad on craigslist for doors or something. maybe we can setup a weekend and you can ride out to davids with me. he has all the cool tools!
Posted via Mobile Device

Gixxer711, that sounds great! This weekend is the swap meet at Traders Village and I'm heading out there on Saturday. Are you going to be going?

gixxer711 · 03-13-2013, 10:35 AM

Quote:

Originally Posted by Realnoisy

Gixxer711, that sounds great! This weekend is the swap meet at Traders Village and I'm heading out there on Saturday. Are you going to be going?

no, going out of town friday for my anni. i will get with david and set something up. i think he is busy with family the next couple weekends.

ChefCy · 06-06-2013, 08:03 AM

any updates and pics?

Realnoisy · 06-06-2013, 09:27 AM

Quote:

Originally Posted by ChefCy

any updates and pics?

I have had to take a break from the truck for other obligations. Hope to get back to it within the next couple of months....when it's a nice 103 degrees outside.

ChefCy · 06-06-2013, 11:36 AM

lol Mark, I know what you mean.
I should have my truck down here from Vegas next month (fingers crossed)
I am buying a york 210 rebuilt for $100 and was hoping you could help me out sometime.

Im hoarding parts and tools right now. Like an expectant father getting the nursery ready for the new arrival.

Novalicious · 06-09-2013, 04:43 PM

In

ChopperCity256 · 06-19-2013, 10:52 PM

wanting to see this too!

gulfcoast66 · 01-11-2014, 06:39 PM

Hows your York install coming along??? GC66

**kev2809** · 03-10-2014, 09:18 AM

did you ever get this done?

Realnoisy · 10-17-2014, 12:52 PM

Quote:

Originally Posted by kev2809

did you ever get this done?

LOL! After months of waiting for Thorbeck Bros to manufacture my Super Lift Kit, I finally gave up on them and got a kit in one day from Ekstensive (Great Guys!). What a bunch of crap and I recommend to everyone to stay away from Thorbeck Bros.

So, I have been so busy with lowering the the rear of the truck. I still have a few more things to do on the rear like panhard bar and rear shocks before I get to the York, tank etc.. installed.

Hopefully I will be working on the York within the next few weeks.

02-16-2013, 11:44 PM	#2
david72 Registered User Join Date: Oct 2004 Location: Bellville , tx Posts: 11	Re: Onboard Air install with a York Compressor. Start to finish I just picked up a compressor today. I should hopefully be caught up this week and get started on figuring some configurations out. Any preference to driver or passenger side mount? I have read about the oiling mods needed for one way, ill read up on that some more!! Also a long or short water pump will make a difference. My truck has a short on it now, I guess ill start with that set up. Posted via Mobile Device

02-18-2013, 12:04 PM	#4
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: Onboard Air install with a York Compressor. Start to finish Were can I find info on this mod for the york Posted via Mobile Device __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

02-18-2013, 12:06 PM	#6
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: Onboard Air install with a York Compressor. Start to finish Thanks Blitz valve they work great had them for six years. Time for a change I might just go accuair or manual vavles Posted via Mobile Device __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

03-08-2013, 12:13 PM	#7
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: Onboard Air install with a York Compressor. Start to finish Any updates on your york set up? Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

03-08-2013, 07:29 PM	#9
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: Onboard Air install with a York Compressor. Start to finish anyone of you guys running power steering pump? __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

03-09-2013, 08:53 AM	#10
Realnoisy Registered User Join Date: Dec 2011 Location: Houston, Texas Posts: 229	Re: Onboard Air install with a York Compressor. Start to finish Yes, I am. __________________ A spirit with a vision is a dream with a mission - Neil Peart RUSH

03-09-2013, 02:45 PM	#11
david72 Registered User Join Date: Oct 2004 Location: Bellville , tx Posts: 11	Re: Onboard Air install with a York Compressor. Start to finish sorry guys, been slackin too!! got held up on another big job that I'm tryin to get out of the shop to free up some space for the truck to roll in. I did get a chance to start drawing up a bracket set up in cad. Unfortunately that's about as far as I've made it. We did just get our porterbuilt rear x member in! So now the fun begins with that hopefully after I'm done bending up the tubing on this project!

03-09-2013, 11:53 PM	#12
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: Onboard Air install with a York Compressor. Start to finish heres mine but with out the power steering pump. I may change it and move it higher so i can add the power steering pump Attached Images __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

03-10-2013, 12:14 AM	#13
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: Onboard Air install with a York Compressor. Start to finish Nice set up sick 5. Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

03-10-2013, 06:22 AM	#14
Realnoisy Registered User Join Date: Dec 2011 Location: Houston, Texas Posts: 229	Re: Onboard Air install with a York Compressor. Start to finish Yea, I like it too! That looks like the original bracket that has been modified. I have my original bracket maybe I can do something like you have. __________________ A spirit with a vision is a dream with a mission - Neil Peart RUSH

03-11-2013, 11:57 PM	#15
gixxer711 Registered User Join Date: May 2012 Location: Cypress, TX Posts: 163	Re: Onboard Air install with a York Compressor. Start to finish hey realnoisy. david has the chassis for my new 64. i think you emailed me awhile back when i had an ad on craigslist for doors or something. maybe we can setup a weekend and you can ride out to davids with me. he has all the cool tools! Posted via Mobile Device

06-06-2013, 08:03 AM	#18
ChefCy Registered User Join Date: Apr 2013 Location: Houston,TX.....Hometown of San Jose Cali Posts: 361	Re: Onboard Air install with a York Compressor. Start to finish any updates and pics?

06-06-2013, 11:36 AM	#20
ChefCy Registered User Join Date: Apr 2013 Location: Houston,TX.....Hometown of San Jose Cali Posts: 361	Re: Onboard Air install with a York Compressor. Start to finish lol Mark, I know what you mean. I should have my truck down here from Vegas next month (fingers crossed) I am buying a york 210 rebuilt for $100 and was hoping you could help me out sometime. Im hoarding parts and tools right now. Like an expectant father getting the nursery ready for the new arrival.

06-09-2013, 04:43 PM	#21
Novalicious Registered User Join Date: Dec 2012 Location: Long Island, NEW YORK Posts: 95	Re: Onboard Air install with a York Compressor. Start to finish In

06-19-2013, 10:52 PM	#22
ChopperCity256 Registered User Join Date: Apr 2012 Location: Tampa, Florida. Posts: 87	Re: Onboard Air install with a York Compressor. Start to finish wanting to see this too!



Register or Log In To remove these advertisements.

01-11-2014, 06:39 PM	#23
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Onboard Air install with a York Compressor. Start to finish Hows your York install coming along??? GC66 __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

03-10-2014, 09:18 AM	#24
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Onboard Air install with a York Compressor. Start to finish did you ever get this done? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.