GA 1971 gmc parting out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 05-19-2013, 11:08 PM

Quote:

Originally Posted by special-K

How is the driver's door? I'm interested in that

What's the word on the door?

**heehawracing** · 05-20-2013, 08:22 AM

the door is rust free but is broken around the hinge
bed moulding is no good
grill and the chrome around it is pitted would look ok on a driver
headlight bezels look like they would clean up good

**special-K** · 05-20-2013, 10:05 AM

Do you mean broke like it's split how some do? It doesn't have to be pretty. If it can just be welded up that's good enough. The color is close and my door is jacked up on the bottom rear corner from the fool who took the senior west coasts off,cuz he's not a real truck guy. The smaller mirrors he installed were obviously inadequate so he was backing up holding the door open and snagged it

Oddfire · 05-20-2013, 10:07 AM

Eyebrow molding looks good to me. Any word from tinkermc? Jamie 71

Longhorn

71proj · 05-20-2013, 10:35 AM

Quote:

Originally Posted by heehawracing

hubcaps 55.00 shipped driver condition i took a picture of the worst two

Thanks look like nice hubcaps and at a good price! Unfortunately I posted before I realized that they were GMC...I need Chevys. THANKS!
Posted via Mobile Device

Tinkermc · 05-20-2013, 11:06 AM

Tinkermc is still waiting on a price, Oddfire.

**thelonerife** · 05-24-2013, 11:52 PM

Quote:

Originally Posted by thelonerife

looking for a nice wiper knob

I guess, no knob?

Hardesty454 · 05-25-2013, 12:51 AM

Are you selling LH RH fenders? If so whats the condition and how much shipped to 95367.

Hard_Rain420 · 05-25-2013, 02:19 AM

How much "shipped to FL 32901 for the rubber floor mat? Is it a low hump? Only interested if it's in good clean condition w/o any tears. Thanks!

Hard_Rain420 · 05-25-2013, 02:26 AM

Also, how much for the rain shields shipped to 32901? Are they in good condition?

Evaded · 05-25-2013, 07:35 AM

Need complete set of bottom woodgrain moulding please.. pmd as well. Thanks

Eric

hpcgmc · 05-29-2013, 10:45 PM

If rubber floor mat is in good shape, and high hump (Hard Rain wants it if low hump), how much with shipping to 95603?

Hard_Rain420 · 05-30-2013, 12:03 AM

I asked about the rain shields. I should have called them window visors. Looking for cost with combined shipping with the rubber mat if the mat is a low hump.

Thanks, Rich

**DeadheadNM** · 05-30-2013, 01:03 AM

Unsubscribed....

**heehawracing** · 05-30-2013, 08:02 AM

pulled the floor mat out it is in bad condition it looks good in the truck but when i pulled it out it came apart

Quote:

Originally Posted by Hard_Rain420

I asked about the rain shields. I should have called them window visors. Looking for cost with combined shipping with the rubber mat if the mat is a low hump.

Thanks, Rich

**heehawracing** · 05-30-2013, 08:03 AM

Quote:

Originally Posted by Hard_Rain420

I asked about the rain shields. I should have called them window visors. Looking for cost with combined shipping with the rubber mat if the mat is a low hump.

Thanks, Rich

window visors are good 40.00 shipped

**heehawracing** · 05-30-2013, 08:04 AM

Quote:

Originally Posted by Evaded

Need complete set of bottom woodgrain moulding please.. pmd as well. Thanks

Eric

sorry i dont have any woodgrain moulding right now

**heehawracing** · 05-30-2013, 08:08 AM

40.00 shipped on the eyebrow moulding
40.00 shipped on the headlight bezels

**heehawracing** · 05-30-2013, 08:11 AM

sorry it took so long to answer i got some metal in my eyes and have been out of commision for a wile

Marcello D'Ottavio · 05-30-2013, 01:33 PM

What type of diff. is on the truck?

**heehawracing** · 05-30-2013, 01:36 PM

sorry rearend is sold
thanks

Hard_Rain420 · 05-30-2013, 02:08 PM

Cool, I'll take the visors. I'll pm my PayPal info.

Thanks,

Rich

Operatorfailure · 05-30-2013, 05:31 PM

Sending PM on column.

Oddfire · 05-30-2013, 05:41 PM

Forward light wiring & rear tail light harnesses? What shape? Jamie 71

Longhorn

Scott T. · 05-30-2013, 05:55 PM

Interested in complete gas pedal assembly with cable, pending price.
Thanks

05-20-2013, 08:22 AM	#27
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 gmc parting out the door is rust free but is broken around the hinge bed moulding is no good grill and the chrome around it is pitted would look ok on a driver headlight bezels look like they would clean up good Attached Images

05-20-2013, 10:05 AM	#28
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1971 gmc parting out Do you mean broke like it's split how some do? It doesn't have to be pretty. If it can just be welded up that's good enough. The color is close and my door is jacked up on the bottom rear corner from the fool who took the senior west coasts off,cuz he's not a real truck guy. The smaller mirrors he installed were obviously inadequate so he was backing up holding the door open and snagged it __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-20-2013, 10:07 AM	#29
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1971 gmc parting out Eyebrow molding looks good to me. Any word from tinkermc? Jamie 71 Longhorn

05-20-2013, 11:06 AM	#31
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: 1971 gmc parting out Tinkermc is still waiting on a price, Oddfire.

05-25-2013, 12:51 AM	#33
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: 1971 gmc parting out Are you selling LH RH fenders? If so whats the condition and how much shipped to 95367. __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

05-25-2013, 02:19 AM	#34
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1971 gmc parting out How much "shipped to FL 32901 for the rubber floor mat? Is it a low hump? Only interested if it's in good clean condition w/o any tears. Thanks!

05-25-2013, 02:26 AM	#35
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1971 gmc parting out Also, how much for the rain shields shipped to 32901? Are they in good condition?

05-25-2013, 07:35 AM	#36
Evaded Registered User Join Date: Apr 2013 Location: San Antonio TX Posts: 424	Re: 1971 gmc parting out Need complete set of bottom woodgrain moulding please.. pmd as well. Thanks Eric __________________ If I see a Zombie.. Im runnin it over with my Truck.

05-29-2013, 10:45 PM	#37
hpcgmc Registered User Join Date: Oct 2012 Location: Northern Cal Posts: 249	Re: 1971 gmc parting out If rubber floor mat is in good shape, and high hump (Hard Rain wants it if low hump), how much with shipping to 95603? __________________ 1967 GMC 1500 SWB. Driving this truck since I was 14.

05-30-2013, 12:03 AM	#38
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1971 gmc parting out I asked about the rain shields. I should have called them window visors. Looking for cost with combined shipping with the rubber mat if the mat is a low hump. Thanks, Rich

05-30-2013, 01:03 AM	#39
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: 1971 gmc parting out Unsubscribed.... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-30-2013, 08:08 AM	#43
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 gmc parting out 40.00 shipped on the eyebrow moulding 40.00 shipped on the headlight bezels

05-30-2013, 08:11 AM	#44
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 gmc parting out sorry it took so long to answer i got some metal in my eyes and have been out of commision for a wile

05-30-2013, 01:33 PM	#45
Marcello D'Ottavio Registered User Join Date: Jul 2012 Location: Winnipeg, Manitoba, Canada Posts: 18	Re: 1971 gmc parting out What type of diff. is on the truck?

05-30-2013, 01:36 PM	#46
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 gmc parting out sorry rearend is sold thanks



Register or Log In To remove these advertisements.

05-30-2013, 02:08 PM	#47
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1971 gmc parting out Cool, I'll take the visors. I'll pm my PayPal info. Thanks, Rich

05-30-2013, 05:31 PM	#48
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: 1971 gmc parting out Sending PM on column.

05-30-2013, 05:41 PM	#49
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1971 gmc parting out Forward light wiring & rear tail light harnesses? What shape? Jamie 71 Longhorn

05-30-2013, 05:55 PM	#50
Scott T. Registered User Join Date: Dec 2009 Location: Mt. Juliet, Tn. Posts: 38	Re: 1971 gmc parting out Interested in complete gas pedal assembly with cable, pending price. Thanks

Register or Log In To remove these advertisements.