c20 builds

[rickywideglide]

just looking back on first post, seems ive made a little progress doesnt always feel that way but did a few things i planned and some i didnt and a whole lot more to do, i think next is definitely dual master cylinder

[tmills213]

Originally Posted by 19666Trucker

It sounds like did, I was going leave my helps spring on. Like that faded blue. How much did you cut the front. Make a ne panbar or get adjusted one.
Posted via Mobile Device

sorry, I don't get notices anymore for some reason. I believe it was 1.25-1.5 it sits uneven since I cut them a little uneven. I want it out and want air ride in. not so much to get low but more ride quality. adjustable is nice and it looks very easy. It bottoms out way too easy with TJ springs and the panhard has it cocked over about .5"

[HDtech]

Good looking truck Rick

[mattbert56]

nice truck, iv always liked the factory stance personally, but the drop would serve that truck right. good luck

[rickywideglide]

haven't posted my truck in awhile,just put tags on it last week ,finished up c20 to c10 spindles and disc brakes ,did some painting and some bodywork still more to do

[dmulally]

Looks fantastic. Were there many mods to do to change to C10 parts? My steering has plenty of slop in it (66 C20) and I'm wondering if I should just target the steering box or go further.

[rickywideglide]

Originally Posted by dmulally

Looks fantastic. Were there many mods to do to change to C10 parts? My steering has plenty of slop in it (66 C20) and I'm wondering if I should just target the steering box or go further.

thanks!
I used early classic c20 to c10 conversion kit that came with pretty much everything,changed ball joints and tie rod ends while I was in there,still have stock steering box,but plan on doing power steering soon

[rickywideglide]

put c notch in and rear bags