KS Lots of NIB Interior Items and extras - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

p_rubottom · 03-12-2014, 03:08 AM

I'll take the gray dash pad and cab/door seals if they are still available.

**Cash3481** · 03-12-2014, 11:13 AM

Quote:

Originally Posted by Jb70c10

PayPal sent for window kit, $50

It goes out today!

Quote:

Originally Posted by p_rubottom

I'll take the gray dash pad and cab/door seals if they are still available.

Its yours Preston!

Mike

**Cash3481** · 03-12-2014, 04:04 PM

[quote=allons;6569381]

Quote:

Originally Posted by Cash3481

I'm just trying to be clear . . . . $60 (shipped) for both of them? Thanks, Jim

Yes sir... Sorry I missed your post!

67ctener · 03-08-2014, 02:14 PM

Sorry didn't see someone had asked about heater controls already. I get in line for controls and cables for asking price. Thanks

**Cash3481** · 03-08-2014, 06:20 PM

Quote:

Originally Posted by bertvert72

how much for the 67-8 grille

$125 plus 72.80 shipping can we agree on $200 shipped that's a lot of tape!

Quote:

Originally Posted by crob35

67 grille price and shipping to 31701? Thanks

$125 plus 77.90 shipping can we agree on $200 shipped that's a lot of tape!

Quote:

Originally Posted by John H.

I will take the 4x4 fan shroud.
Thanks

$45 plus 35.48 shipping. $80 shipped total

Quote:

Originally Posted by nobolt

good morning Mike,
i'll take the blue dash pad if it is still soft and pliable. shipping will be to 48001.thanks

It's in good shape, $75 plus $15.50 standard or 21.50 for priority!

Quote:

Originally Posted by 29od1

Hi Mike,
I'll take those 4x4 wheel caps.
Thanks,
David

They are yours David!

Quote:

Originally Posted by ABNGRNT13

How much for Vent rubbers, Door rubbers, and Interior light bezel to 36856

$85 plus $12.75 for shipping. Total is $97.75 shipped!

Quote:

Originally Posted by 530FF

Hold down trim strips availlable for metal door panels
Thanks

I have a set from the 67 GMC I parted. Some pitting but you can check out that thread for pics. $25 shipped on them.

Quote:

Originally Posted by tonkatrux2

I would like the heater control and cables would shipping to salina 67402

$115 plus $18 shipping is $133 shipped.

Quote:

Originally Posted by p3ug

I'll take the chrome dome light bezel and rubber for the vent windows.

You are 2nd on both sir.

Quote:

Originally Posted by Dirt's72

I'll take the ac defrost hoses.

$45 plus $15 shipping for a $60 total shipped.

Quote:

Originally Posted by allons

I'll take the grill hoops. PM me your payment info. Thanks

$40 for the hoops and $16 for shipping.

Quote:

Originally Posted by 67ctener

Sorry didn't see someone had asked about heater controls already. I get in line for controls and cables for asking price. Thanks

Thanks I'll let you know if he passes.

I need everyone to let me know yes or no and I'll send you the papal Address.

Mike

allons · 03-08-2014, 07:40 PM

Mike, I'll take the grill hoops for $40 + $16 on the shipping (43357). Let me know payment method. Thanks, Jim

Dirt's72 · 03-08-2014, 07:54 PM

Mike, payment sent for heater ac hoses. Thank you

**Cash3481** · 03-08-2014, 09:01 PM

Quote:

Originally Posted by allons

Mike, I'll take the grill hoops for $40 + $16 on the shipping (43357). Let me know payment method. Thanks, Jim

PM Sent with my Paypal.

Quote:

Originally Posted by Dirt's72

Mike, payment sent for heater ac hoses. Thank you

Thank you! Ill get them out Monday.

Mike

72junky · 03-08-2014, 09:24 PM

Hey Mike,
The first pictures of the oem dash pad. Is that original blue? Interested. Thanks,

**Cash3481** · 03-08-2014, 10:06 PM

Quote:

Originally Posted by 72junky

Hey Mike,
The first pictures of the oem dash pad. Is that original blue? Interested. Thanks,

It is spoken for as of now so you will be 2nd in line.
There is a brand new aftermarket dark grey one still in the box if your interested. Ill let you know if he passes.
Mike

**70STOVEBOLT** · 03-08-2014, 11:17 PM

Mike, I did not see a price listed for the upper channel runs, vertical division felts, and window wipes. Are they still available? If so, price shipped to 46562 please.

Thanks,
Mark

**Cash3481** · 03-08-2014, 11:31 PM

Quote:

Originally Posted by 70STOVEBOLT

Mike, I did not see a price listed for the upper channel runs, vertical division felts, and window wipes. Are they still available? If so, price shipped to 46562 please.

Thanks,
Mark

Evening Mark,
Im trying to determine if they are for a double wall or single and if there is a difference. Ill post back tomorrow after I find out.
Mike

Jb70c10 · 03-09-2014, 04:03 AM

Quote:

Originally Posted by Cash3481

Evening Mark,
Im trying to determine if they are for a double wall or single and if there is a difference. Ill post back tomorrow after I find out.
Mike

I would be interested in these as well if they get to me, thanks
also interested in the deluxe saddle boor panels, shipping to 76502 please

nobolt · 03-09-2014, 05:42 AM

Mike,
I will paypal you first thing in the morning for the blue dash pad.
regular delivery should be fine.
thanks

**70STOVEBOLT** · 03-09-2014, 10:42 AM

Mike, I did not realize they were for a blazer. I can not use them. Thank you for the reply.

Mark

ontrak12 · 03-09-2014, 05:29 PM

Hello Mike
I'm interested in the weather stripping kit is this for a truck or a blazer I don't need the door stripping I need the window stripping. shipping to 28409

Thanks Bill

**70STOVEBOLT** · 03-10-2014, 10:53 AM

Mike, if the window wipes have the stainless bead I will take them.

Thanks,
Mark

JJH Jimmy · 03-10-2014, 11:54 AM

I will pass on the door handles. Thank you.

allons · 03-10-2014, 12:49 PM

Hey Mike, I'm a bit unclear . . . what are you asking for both door handles? Thanks

**Cash3481** · 03-10-2014, 09:35 PM

[quote=Jb70c10;6567218]

Quote:

Originally Posted by Cash3481

These ended up being for a truck and not a blazer so you are still first in line the price is $65 plus $12 standard or $17 priority.
$75 plus $15 for shipping on the door panels. you will be 2nd on the window rubber.
Just wondering what the status is on these, thanks,,,,,,

Your up on the window rubber sir. Door panels are ready to go as well.

Quote:

Originally Posted by 70STOVEBOLT

Mike, if the window wipes have the stainless bead I will take them.
Thanks,
Mark

Mark,
The wipes are black, sorry.

Quote:

Originally Posted by JJH Jimmy

I will pass on the door handles. Thank you.

No problem!

Quote:

Originally Posted by allons

Hey Mike, I'm a bit unclear . . . what are you asking for both door handles? Thanks

I just looked at them on line so I'll offer them for $60 shipped to you. Not to slight JJH Jimmy but I thought they were more that that new.

Mike

allons · 03-11-2014, 11:02 AM

[quote=Cash3481;6568482]

Quote:

Originally Posted by Jb70c10

Your up on the window rubber sir. Door panels are ready to go as well.

Mark,
The wipes are black, sorry.

No problem!

I just looked at them on line so I'll offer them for $60 shipped to you. Not to slight JJH Jimmy but I thought they were more that that new.

Mike

I'm just trying to be clear . . . . $60 (shipped) for both of them? Thanks, Jim

71c1 · 03-11-2014, 11:33 AM

not sure if you plan on parting out the cab, but I'll be interested in the support bracket from the blazer cab, that support the bucket seats. (exterior bottom of cab)

**Cash3481** · 03-11-2014, 11:42 AM

Quote:

Originally Posted by 71c1

not sure if you plan on parting out the cab, but I'll be interested in the support bracket from the blazer cab, that support the bucket seats. (exterior bottom of cab)

There was some blazer parts but no blazer... Sorry.
Mike

Jb70c10 · 03-11-2014, 05:46 PM

Pm sent regarding window rubbers and door panels

**Cash3481** · 03-11-2014, 11:16 PM

Quote:

Originally Posted by Jb70c10

Pm sent regarding window rubbers and door panels

JB70c10:
Here are the pics you requested in your PM.
There is a little overspray on the pass side panel that will lean off with some elbow grease. There is also some chalking on it as well. These deluxe 72s in saddle are a little harder to find than most nowadays. I haven't had a truck with them at all till now and I only got the panels. Let me know if they fit you liking.
I also added the picture of the rubber trim pieces so you can see what it includes.
Mike

03-12-2014, 03:08 AM	#1
p_rubottom Registered User Join Date: Aug 2007 Location: Kansas Posts: 366	Re: Lots of NIB Interior Items and extras I'll take the gray dash pad and cab/door seals if they are still available.

03-08-2014, 02:14 PM	#4
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Lots of NIB Interior Items and extras Sorry didn't see someone had asked about heater controls already. I get in line for controls and cables for asking price. Thanks

03-08-2014, 07:40 PM	#6
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Lots of NIB Interior Items and extras Mike, I'll take the grill hoops for $40 + $16 on the shipping (43357). Let me know payment method. Thanks, Jim

03-08-2014, 07:54 PM	#7
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Lots of NIB Interior Items and extras Mike, payment sent for heater ac hoses. Thank you

03-08-2014, 09:24 PM	#9
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: Lots of NIB Interior Items and extras Hey Mike, The first pictures of the oem dash pad. Is that original blue? Interested. Thanks, __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

03-08-2014, 11:17 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: Lots of NIB Interior Items and extras Mike, I did not see a price listed for the upper channel runs, vertical division felts, and window wipes. Are they still available? If so, price shipped to 46562 please. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-09-2014, 05:42 AM	#14
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Lots of NIB Interior Items and extras Mike, I will paypal you first thing in the morning for the blue dash pad. regular delivery should be fine. thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

03-09-2014, 10:42 AM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: Lots of NIB Interior Items and extras Mike, I did not realize they were for a blazer. I can not use them. Thank you for the reply. Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-09-2014, 05:29 PM	#16
ontrak12 Registered User Join Date: Jul 2013 Location: wilmington North Carolina Posts: 27	Re: Lots of NIB Interior Items and extras Hello Mike I'm interested in the weather stripping kit is this for a truck or a blazer I don't need the door stripping I need the window stripping. shipping to 28409 Thanks Bill

03-10-2014, 10:53 AM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: Lots of NIB Interior Items and extras Mike, if the window wipes have the stainless bead I will take them. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-10-2014, 11:54 AM	#18
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 929	Re: Lots of NIB Interior Items and extras I will pass on the door handles. Thank you. __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

03-10-2014, 12:49 PM	#19
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Lots of NIB Interior Items and extras Hey Mike, I'm a bit unclear . . . what are you asking for both door handles? Thanks

03-11-2014, 11:33 AM	#22
71c1 Registered User Join Date: Feb 2014 Location: Tomball, Texas Posts: 37	Re: Lots of NIB Interior Items and extras not sure if you plan on parting out the cab, but I'll be interested in the support bracket from the blazer cab, that support the bucket seats. (exterior bottom of cab)

03-11-2014, 05:46 PM	#24
Jb70c10 Registered User Join Date: Jan 2014 Location: TX Posts: 181	Re: Lots of NIB Interior Items and extras Pm sent regarding window rubbers and door panels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.