CA 72 Blazer part out

[doo142]

I'll take them , can you verify condition ? They look straight and rust free. Ship is to 46507 , thanks!

[doo142]

I'd be interested in both side vent boxes also

[budnikguy]

I do, $40 shipped....

Originally Posted by JJH Jimmy

I see that you have several 67-72's. Would you happen to have a passenger side sport mirror?

Thanks.

[budnikguy]

Let me get it disassembled a bit and i would be happy to cut this section for you.Do you need it to wrap around and include the taillight section?

Originally Posted by tdkosta

Interested in this section. Thanks - Tony

[budnikguy]

I will look for any extra holes in the floor and let you know....are you wanting complete floors? If you could supply a photo of where you would want the cuts from also...ty

Originally Posted by tjsblazer

Interested in both front floor sections if they are solid.. Does the passenger have some extra holes drilled in it?

[budnikguy]

I will begin removal tomorrow and continue into the weekend....

Originally Posted by doo142

I'll take them , can you verify condition ? They look straight and rust free. Ship is to 46507 , thanks!

[tdkosta]

Originally Posted by budnikguy

Let me get it disassembled a bit and i would be happy to cut this section for you.Do you need it to wrap around and include the taillight section?

No I don't need it to wrap around and include the taillight, just up to the edge is fine.

[cst204x4]

Originally Posted by budnikguy

$21.50 shipped

Sounds good I'll take the ac bracket PayPal? Pm me payment info

[JJH Jimmy]

Originally Posted by budnikguy

I do, $40 shipped....

I will take it. PM me payment details and I will send payment in the morning.

Thanks.

[budnikguy]

pm sent...

[JJH Jimmy]

Originally Posted by budnikguy

pm sent...

PM and payment sent. Thank you.

[budnikguy]

There are 4 holes on driver and passenger side in the foot well area..maybe a fires extinguisher or something mounted there at some point...here are more detailed pics

Originally Posted by budnikguy

I will look for any extra holes in the floor and let you know....are you wanting complete floors? If you could supply a photo of where you would want the cuts from also...ty

[budnikguy]

Working on getting them removed, most likely Saturday. Did remove the wiring..looks good!

Originally Posted by JimH2828

Can you send a picture(s) of all the parts off and together, so I can determine condition? No rush, when ever time allows.

Thanks
Jim

[budnikguy]

Pics of vent boxes...

Originally Posted by doo142

I'd be interested in both side vent boxes also

[doo142]

Sorry to confuse, I need the sheet metal box those doors vent to. On pass. Side I need to wrap around up to first opening in cowl.

[budnikguy]

Please post detailed pics of exactly what you need with meaurements. Ty

Originally Posted by doo142

Sorry to confuse, I need the sheet metal box those doors vent to. On pass. Side I need to wrap around up to first opening in cowl.

[tristan]

I wish I could teleport what's left of your bed floor and front floor pans to Pittsburgh, it's even the right color...nuts. If there is some way to ship whatever is left of the floor, even in sections, after everything else is spoken for please let me know.

[tjsblazer]

Originally Posted by budnikguy

There are 4 holes on driver and passenger side in the foot well area..maybe a fires extinguisher or something mounted there at some point...here are more detailed pics

My truck was just blasted and I am going to go see it Sat with body guy. I will draw you out a section then.

[1972 Jimmy]

Originally Posted by budnikguy

Pics of vent boxes...

How much for the passenger side vent plus the vaccum canister shipped to 48623?
Thanks Eric

[doo142]

The sheet metal in the circle that goes under blower motor and up to cowl area. Cut outside of its seam along the fire wall. Thanks

[Banderian]

I am interested in both tail light pieces and a couple of inches forward from there.

[1972 Jimmy]

interested in both pillar door rear openings along with rocker box reinforcement panel. will try and send pictures tomorrow.
Thanks eric

[19702wdc10]

I am interested in the drivers rear corner, I am looking to install a blazer fuel tank in my C10 and would like the section including the piece on the floor that has the holes for the filler neck and vent tube. I believe the original hole is under the bond near top. I would like the piece from right behind the rear tire tub to the end.

I am also interested in the vent tube and mounts depending on the condition of the three lines coming out of the bottom.

Looking for a price for the clutch block off plate

Also do you have a charcoal canister/bracket

Thanks
Joe

[1972 Jimmy]

Originally Posted by 1972 Jimmy

interested in both pillar door rear openings along with rocker box reinforcement panel. will try and send pictures tomorrow.
Thanks eric

Follow up to my previous message. I'm interested in both rear door pillars basically from under the rocker all the way up to the box rail.

Both rocker box support panels (picture is looking in the rear wheel well looking toward the cab.

And last but not least the both floor support pieces (picture is looking rearward into the rocker box)

What condition are these pcs in (pictures would be great!) and how much shipped to 48623 Could you throw in the passenger vent flap and vaccum canister into that as well (From you previous post)
Thanks,
Eric

[BLUE THUNDER]

Do you still have the windshield frame? If so, how much?