IA 1976 Sierra Classic 2WD 454 longbed part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**76on44s** · 05-05-2014, 06:51 PM

I will take the door panels

bnoon · 05-06-2014, 08:26 AM

Quote:

Originally Posted by jlmerie

I will take the door panels as long as shipping is reasonable. Do you have the dash emblem? Shipping quote to 80516.

Dash emblem so that you can make your decision.

**jlmerie** · 05-06-2014, 08:45 AM

I will take the door panels and the insert. Let me know how you want to get paid.

bnoon · 05-07-2014, 09:29 AM

Adding parts to the list above and here...

$60 Hood. Few rust bubbles started along the front, but none through the metal. Sand it down and repaint $60
$80 Driver's fender, no rust $80
$80 Passenger's fender, no rust, light door ding $80
$50 Radiator support, comes with or without AC condenser $50
$80 SHIPPED PRICE Sport mirrors, few light scratches, missing the plastic "gasket" from one, but complete with brackets and screws SHIPPED PRICE $80

bnoon · 05-07-2014, 09:33 AM

Quote:

Originally Posted by qksilver

I will do the engine brackets and pulley's, possibly the radiator 3 or 4 core? (depends on shipping) and if you have the complete engine oil cooler and power steering cooler? if it came with them. I am trying put everything back that was strippped off of my 454 2 wheel drive blazer before i bought it.

If possible would I be able to get all the bolts, nuts etc since I don't have any of it.

Let me know, money is tight but depending on shipping on the radiator and price of the coolers...........definitely want the brackets etc

Thanks,
Steve

PM me or SCJKOVACH@AOL.COM I tend to forget

Pictures for you. Brackets all boxed and ready to go.

Decided to keep the radiator for the green truck as it is in better condition.

**76on44s** · 05-07-2014, 09:46 AM

pics of the wings and side windows? rear step bumper?

bnoon · 05-07-2014, 10:54 AM

Quote:

Originally Posted by 76on44s

pics of the wings and side windows? rear step bumper?

Here's pictures of the side glass and vents (these two are all I have right now). I'll get updated pictures when I pull them from the truck unless you have to have them right now. If you do, I'll pull them tonight instead of pulling the engine/trans.

The rear bumper is welded to the frame and will not be removed. All usable parts from this bumper are being swapped to my '74.

qksilver · 05-07-2014, 10:04 PM

sure no problem $40? can you give me a weight and i can email the shipping label

and how do you want to be paid?

Thanks,
Steve

brothers69c-10 · 05-08-2014, 07:46 AM

Interested in both fenders. PM sent.

bnoon · 05-08-2014, 08:53 AM

Quote:

Originally Posted by walkerb

Interested in the engine supports that the engine mounts bolt to. Thanks

I got the engine and trans out last night. These look to be in fine condition. $20 shipped do it for you?

Quote:

Originally Posted by qksilver

sure no problem $40? can you give me a weight and i can email the shipping label

and how do you want to be paid?

Thanks,
Steve

PM'ed you.

Quote:

Originally Posted by brothers69c-10

Interested in both fenders. PM sent.

PM returned.

hamad · 05-09-2014, 03:10 PM

Can I get more pics of The gauge bezel and dash insert please, thanks

**jlmerie** · 05-09-2014, 08:36 PM

Parts arrived today. Fast shipping and well packaged. Great parts. Thanks!!

walkerb · 05-09-2014, 08:48 PM

Anyway you could snap a pic to make sure were talking about the same thing? It was a factory big block truck correct? Thank you

bnoon · 05-10-2014, 12:09 AM

Quote:

Originally Posted by walkerb

Anyway you could snap a pic to make sure were talking about the same thing? It was a factory big block truck correct? Thank you

Yes, it was a factory BBC and here you go. I just got them pulled tonight. Do you want the whole thing, or just the little bolt on part that holds the rubber mount?

l1l · 05-10-2014, 01:46 AM

Do you still has the AC Compressor and Power steering pump ? did they work properly before you park the car ?

bnoon · 05-10-2014, 09:37 AM

Quote:

Originally Posted by l1l

Do you still has the AC Compressor and Power steering pump ? did they work properly before you park the car ?

The compressor was working, but could probably use a rebuild. PS pump had a leak and not worth the shipping.

bnoon · 05-10-2014, 10:57 AM

Quote:

Originally Posted by hamad

Can I get more pics of The gauge bezel and dash insert please, thanks

Here's the gauge bezel setup. Dash insert is gone.

walkerb · 05-11-2014, 07:04 PM

Quote:

Originally Posted by bnoon

Yes, it was a factory BBC and here you go. I just got them pulled tonight. Do you want the whole thing, or just the little bolt on part that holds the rubber mount?

Just what you have pictured please. I will pm you tomorrow thank you.

brothers69c-10 · 05-12-2014, 07:40 AM

I'll take the gauge bezel. Pay for it when I pick up the rest of the parts?

bnoon · 05-12-2014, 08:30 AM

Quote:

Originally Posted by brothers69c-10

I'll take the gauge bezel. Pay for it when I pick up the rest of the parts?

Works for me Matt.

66/87chevy · 05-12-2014, 03:14 PM

I might be interested in the th400 do you know the history of this truck. Is it an original th400 to the truck? Does it have a single drive shaft or does it have the two drive shaft set up with a carrier bearing ?

bnoon · 05-12-2014, 04:14 PM

Quote:

Originally Posted by 66/87chevy

I might be interested in the th400 do you know the history of this truck. Is it an original th400 to the truck? Does it have a single drive shaft or does it have the two drive shaft set up with a carrier bearing ?

I know the entire truck was gone through in 1996 and sold for $6995 in Creston, IA. I do not know if the transmission is original. It has a shift kit in it though, so not 100% stock even if it were original. It is a 2 piece drive shaft with carrier bearing.

**ScottH** · 05-14-2014, 12:11 AM

would u have the trans cross member still?
If u do could u post a pic?

Thanks

bnoon · 05-14-2014, 08:16 AM

Quote:

Originally Posted by ScottH

would u have the trans cross member still?
If u do could u post a pic?

Thanks

I do have it, haven't pulled it. How much would you be offering?

**ScottH** · 05-14-2014, 11:41 PM

not sure what they go for, can u post some pics of it installed?

05-05-2014, 06:51 PM	#26
76on44s Active Member Join Date: Jun 2012 Location: lane, s.c Posts: 185	Re: 1976 Sierra Classic 2WD 454 longbed part out I will take the door panels

05-06-2014, 08:45 AM	#28
jlmerie Registered User Join Date: Sep 2005 Location: Colorado Posts: 1,077	Re: 1976 Sierra Classic 2WD 454 longbed part out I will take the door panels and the insert. Let me know how you want to get paid. __________________ James

05-07-2014, 09:29 AM	#29
bnoon Registered User Join Date: Jul 2012 Location: Des Moines IA Posts: 1,250	Re: 1976 Sierra Classic 2WD 454 longbed part out Adding parts to the list above and here... $60 Hood. Few rust bubbles started along the front, but none through the metal. Sand it down and repaint $60 $80 Driver's fender, no rust $80 $80 Passenger's fender, no rust, light door ding $80 $50 Radiator support, comes with or without AC condenser $50 $80 SHIPPED PRICE Sport mirrors, few light scratches, missing the plastic "gasket" from one, but complete with brackets and screws SHIPPED PRICE $80 Attached Images __________________ - 1981 Sierra 454, NV4500 swap - 2006 Z06, 25k miles - 1973 Nova - Project CarNova Virus on Youtube

05-07-2014, 09:46 AM	#31
76on44s Active Member Join Date: Jun 2012 Location: lane, s.c Posts: 185	Re: 1976 Sierra Classic 2WD 454 longbed part out pics of the wings and side windows? rear step bumper?

05-07-2014, 10:04 PM	#33
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 1976 Sierra Classic 2WD 454 longbed part out sure no problem $40? can you give me a weight and i can email the shipping label and how do you want to be paid? Thanks, Steve

05-08-2014, 07:46 AM	#34
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: 1976 Sierra Classic 2WD 454 longbed part out Interested in both fenders. PM sent. __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"

05-09-2014, 03:10 PM	#36
hamad Registered User Join Date: Jan 2012 Location: DE Posts: 296	Re: 1976 Sierra Classic 2WD 454 longbed part out Can I get more pics of The gauge bezel and dash insert please, thanks __________________ 1987 BLACK GMC C10 shortbed stepside, red interior , LS2, T-56 1982 WHITE GMC Jimmy FULLY convertible, red interior, 4X4, 454, SM465, 1000 KMs ONLY 1977 BRONZE GMC C10 longbed stepside, tan interior, LQ9, 4L65E 1979 RED GMC Street Coupe shortbed stepside, red interior, 454, Turbo 400 1991 GREY and BLACK Chevy Suburban, red interior, 454 tbi, 700r4 1985 BROWN Chevy C20 longbed fleetside, tan inteior, 454, Turbo 400

05-09-2014, 08:36 PM	#37
jlmerie Registered User Join Date: Sep 2005 Location: Colorado Posts: 1,077	Re: 1976 Sierra Classic 2WD 454 longbed part out Parts arrived today. Fast shipping and well packaged. Great parts. Thanks!! __________________ James

05-09-2014, 08:48 PM	#38
walkerb Registered User Join Date: May 2010 Location: Rochester NY Posts: 831	Re: 1976 Sierra Classic 2WD 454 longbed part out Anyway you could snap a pic to make sure were talking about the same thing? It was a factory big block truck correct? Thank you __________________ 1973 k20 Suburban 350 1974 Custom stepside c-10 250 1975 Chevy stepside 454 1986 K30 Crewcab SRW 350 R.I.P- glimmertwin01- board member and good friend, you will be missed

05-10-2014, 01:46 AM	#40
l1l Registered User Join Date: Jun 2011 Location: FL Posts: 247	Re: 1976 Sierra Classic 2WD 454 longbed part out Do you still has the AC Compressor and Power steering pump ? did they work properly before you park the car ?

05-12-2014, 07:40 AM	#44
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: 1976 Sierra Classic 2WD 454 longbed part out I'll take the gauge bezel. Pay for it when I pick up the rest of the parts? __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"

05-12-2014, 03:14 PM	#46
66/87chevy Registered User Join Date: Jul 2012 Location: Des Moines Iowa Posts: 90	Re: 1976 Sierra Classic 2WD 454 longbed part out I might be interested in the th400 do you know the history of this truck. Is it an original th400 to the truck? Does it have a single drive shaft or does it have the two drive shaft set up with a carrier bearing ?

05-14-2014, 12:11 AM	#48
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1976 Sierra Classic 2WD 454 longbed part out would u have the trans cross member still? If u do could u post a pic? Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-14-2014, 11:41 PM	#50
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1976 Sierra Classic 2WD 454 longbed part out not sure what they go for, can u post some pics of it installed? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.