PA rear wheel well ext., hatch parts, 69-71 rock guards - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 11-16-2014, 09:01 PM

My daughter stole the computer I will post the other pictures later tonight

**1rippen6** · 11-16-2014, 09:37 PM

3rd strip has not been blasted and it looks like they heated the area around the screws just looks like the paint was burned off.

**1rippen6** · 11-16-2014, 09:45 PM

Last one it has been blasted and it does have some pin holes that I took picture of.

1972 Jimmy · 11-17-2014, 06:53 AM

Dwayne,
I'm interested in #3 and #4. Looks like the rust on both could be repaired. They both look pretty straight! Of the two, is there any nicks, dings, dents? Send me a PM on what you are looking to get out of each.
Thanks, Eric

**1rippen6** · 11-17-2014, 08:30 AM

Eric,
I will double check tonight on dings or dents and take pictures if I find anything. PM sent

**1rippen6** · 11-17-2014, 09:25 PM

# 3 has a bow but no dings or kinks tried to take a picture of the bow # 4 had holes on the top that I did not notice last night see pictures. I added the bolts to show how they do have a slight taper at the end.

1972 Jimmy · 11-18-2014, 06:51 AM

Dwayne,
The bolts you have Look like to be what I need. As for the tailgate strip, I'm going to take #3. From your pics it looks like there are only three screw holes that have cancer issues. Were as #4 has acouple more issue that #3.
Can you PM me the grand total for the 2 splash gaurds, 10 carriage bolts, 7 washers, 3bolts and tailgate strip. I should be able to PP you money tonight.

Thanks a bunch!
Eric

**1rippen6** · 11-18-2014, 08:36 AM

Eric,

Sent you a pm send me your zip for a shipping quote on the strip.

Thanks,
Dwayne

Boe3 · 11-20-2014, 11:46 PM

I will take the hinge bolts, bumper stops, and stop brackets if available.

**1rippen6** · 11-20-2014, 11:55 PM

Yes still available but I am out of town until Sunday

**D.PASSMORE** · 11-21-2014, 06:47 PM

Quote:

Originally Posted by 1rippen6

Yes, still cutting it up do have a picture to send that will show what you need?

Here you go. I need a section in that area. Mainly the top rail. LMK, Thanks David

**1rippen6** · 11-24-2014, 01:33 PM

Quote:

Originally Posted by D.PASSMORE

Here you go. I need a section in that area. Mainly the top rail. LMK, Thanks David

I will look tonight and take a picture if it is good

**1rippen6** · 11-24-2014, 10:57 PM

Quote:

Originally Posted by D.PASSMORE

Are you still cutting up the 4WD blazer frame? I need a piece. passenger side, front top rail, area above the shock mount. My SWB 4x4 frame was a victim of a BB exchange. The PO trimmed the top rail to squeeze it in... LMK, Thanks David

Here is a picture of the frame rail is it fine 25 for the piece plus shipping. If interested give some measurements from one of the engine mount holes in the frame to give me a reference to cut from.

**D.PASSMORE** · 11-30-2014, 07:32 PM

Just top rail in the box - from the edge, inward. Thanks

**1rippen6** · 12-01-2014, 08:26 AM

Quote:

Originally Posted by D.PASSMORE

Just top rail in the box - from the edge, inward. Thanks

Should be able to cut today or tomorrow send me your zip and I will get you a shipping quote.

**D.PASSMORE** · 12-01-2014, 10:19 AM

Quote:

Originally Posted by 1rippen6

Should be able to cut today or tomorrow send me your zip and I will get you a shipping quote.

Look at my signature...

**1rippen6** · 12-02-2014, 09:03 PM

Quote:

Originally Posted by D.PASSMORE

Look at my signature...

41

16 for shipping 41 total pm sent

**1rippen6** · 02-25-2015, 08:52 AM

Ttt

11-16-2014, 09:01 PM	#26
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards My daughter stole the computer I will post the other pictures later tonight

11-16-2014, 09:37 PM	#27
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards 3rd strip has not been blasted and it looks like they heated the area around the screws just looks like the paint was burned off. Attached Images

11-16-2014, 09:45 PM	#28
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards Last one it has been blasted and it does have some pin holes that I took picture of. Attached Images

11-17-2014, 06:53 AM	#29
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: rear wheel well ext., hatch parts, 69-71 rock guards Dwayne, I'm interested in #3 and #4. Looks like the rust on both could be repaired. They both look pretty straight! Of the two, is there any nicks, dings, dents? Send me a PM on what you are looking to get out of each. Thanks, Eric

11-17-2014, 08:30 AM	#30
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards Eric, I will double check tonight on dings or dents and take pictures if I find anything. PM sent

11-17-2014, 09:25 PM	#31
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards # 3 has a bow but no dings or kinks tried to take a picture of the bow # 4 had holes on the top that I did not notice last night see pictures. I added the bolts to show how they do have a slight taper at the end. Attached Images

11-18-2014, 06:51 AM	#32
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: rear wheel well ext., hatch parts, 69-71 rock guards Dwayne, The bolts you have Look like to be what I need. As for the tailgate strip, I'm going to take #3. From your pics it looks like there are only three screw holes that have cancer issues. Were as #4 has acouple more issue that #3. Can you PM me the grand total for the 2 splash gaurds, 10 carriage bolts, 7 washers, 3bolts and tailgate strip. I should be able to PP you money tonight. Thanks a bunch! Eric

11-18-2014, 08:36 AM	#33
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards Eric, Sent you a pm send me your zip for a shipping quote on the strip. Thanks, Dwayne

11-20-2014, 11:46 PM	#34
Boe3 Registered User Join Date: Nov 2014 Location: Chicago,Illinois Posts: 31	Re: rear wheel well ext., hatch parts, 69-71 rock guards I will take the hinge bolts, bumper stops, and stop brackets if available.

11-20-2014, 11:55 PM	#35
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards Yes still available but I am out of town until Sunday

11-30-2014, 07:32 PM	#39
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: rear wheel well ext., hatch parts, 69-71 rock guards Just top rail in the box - from the edge, inward. Thanks Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

02-25-2015, 08:52 AM	#43
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rear wheel well ext., hatch parts, 69-71 rock guards Ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.