AZ Parting 74 3/4 ton truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

UKNOWME · 08-15-2015, 01:24 AM

Quote:

Originally Posted by t korinek

Rear view is ok driver quality $27 shipped

Gauge Bezel $75 shipped

AC Brackets are gone

Not sure if its the stock dual tank set up or not, see pic of switch.

Door panels not cracked, showing signs of sun deterioration, good for driver ,$60 + shipping, I have a pretty nice original pair, haven't had time to get them out & take pics. (if interested)

Fender trim is just driver quality $15 ea + shipping

there is no stainless on the seat, either gone or not original seat.( although brackets are in correct spots)

Seatbelts $40 shipped outer pairs

Rear of cab trim is dented beyond driver quality.

Haven't had a chance to check shipping on the core support.

I have 2 GMC hub caps, both have some dings & dents $50 for both picked up

I'll get back to you on the mirror. I'm trying to find one in great shape of possible. I'd like more info on the nice original door panels you have.

Thanks

74CustomK20 · 08-17-2015, 08:34 PM

T koronek that's more than,I was looking to spend on a gauge cluster, thanks.

Side note, how much for the engine bay wiring? I need both sides the lights and the engine harness.

fergi62 · 08-17-2015, 09:51 PM

hello, does the truck have the tank valve still on it, for the dual tanks? if it's original should have 6 ports and a single wire to it. if so could you check the condition and let me know what you would need for it? thanks michael

**t korinek** · 08-17-2015, 10:29 PM

I'll check availability of the valve & condition of wiring harness
Thanks
Tom

**t korinek** · 08-19-2015, 05:10 PM

Heres some pics of the wiring, Looks pretty much intact, i can see a few splices on it, didn't have a chance to check out the valve.
Also found a rear of cab molding piece in pretty decent shape $20 + shipping,softballnrd27 has first shot at it.
Thanks,
Tom

74CustomK20 · 08-19-2015, 06:18 PM

Splices are fine, as I have a 75 harness and it won't work... how much shipped to 47586?

On edit my wiring manual shows a "time delay relay" next to the junction block, assuming it mounts to the fire wall. If it's possible include this, as i have no idea what it is. I appreciate the help. It's impossible to find pics of what goes where on these older ones. The junction block on the engine side has 10 wires coming out of it.

Just Hashem · 08-19-2015, 09:57 PM

Quote:

Originally Posted by t korinek

Rear view is ok driver quality $27 shipped

Gauge Bezel $75 shipped

AC Brackets are gone

Not sure if its the stock dual tank set up or not, see pic of switch.

Door panels not cracked, showing signs of sun deterioration, good for driver ,$60 + shipping, I have a pretty nice original pair, haven't had time to get them out & take pics. (if interested)

Fender trim is just driver quality $15 ea + shipping

there is no stainless on the seat, either gone or not original seat.( although brackets are in correct spots)

Seatbelts $40 shipped outer pairs

Rear of cab trim is dented beyond driver quality.

Haven't had a chance to check shipping on the core support.

I have 2 GMC hub caps, both have some dings & dents $50 for both picked up

Will buy those hub caps, please text me your address to my cell phone and I will come and pick them up tomorrow
215-964-4899

Thanks,
Hashem

fergi62 · 08-19-2015, 11:04 PM

Quote:

Originally Posted by fergi62

hello, does the truck have the tank valve still on it, for the dual tanks? if it's original should have 6 ports and a single wire to it. if so could you check the condition and let me know what you would need for it? thanks michael

tom, don't need the wiring for the dual tanks only the valve, mine quit working. thanks for checking on it.

gmclowsierra · 08-20-2015, 01:31 PM

im looking for a bracket on the right side. it bolts to the rad support and the right fender. it holds the lower grill valence in place. do you have that?

**t korinek** · 08-21-2015, 12:45 AM

GMClowsierra I do have that little bracket its off. $16.70 shipped

gmclowsierra · 08-21-2015, 10:42 AM

total? that would be great. need pay information

74CustomK20 · 08-21-2015, 10:02 PM

Ever figure out the wiring harness cost?

**t korinek** · 08-21-2015, 10:10 PM

How about $70 shipped for both under hood harnesses

74CustomK20 · 08-21-2015, 10:36 PM

Alright, I'll put the money in the bank tomorrow and send it your way tomorrow morning. I'm pretty sure I have your paypal.

Justins76 · 08-22-2015, 04:04 AM

Are the door panels still available? Are they sand tan? And it looks like both have a tiny hole drilled in them. Any idea what thats for? Both sides seem to have it in the same spot.

fergi62 · 08-22-2015, 11:10 AM

tom, did you get a chance to check on the tank valve yet?

**t korinek** · 08-22-2015, 07:36 PM

fergie, there is no tank valve on there, I have an aftermarket pollak 6 port valve with 1 wire hook up that I have had as a spare I'd sell it for $70 shipped

The door panels are pearl color.

fergi62 · 08-22-2015, 09:12 PM

if you've checked it and it's good i'll take it. paypal o.k.? if so i need your info to send it to. thanks michael

Old57 · 08-23-2015, 08:34 PM

I'm looking for a good pair of spring hangers for the front of the rear springs. Mine are rusted. Are these in good shape? If so, how much do you want for those?

gmclowsierra · 08-24-2015, 01:29 PM

I need a paypal account to get that bracket.

**t korinek** · 08-24-2015, 09:50 PM

gmclowsierra
Here's a pic of what I think your looking for passenger side

74CustomK20 · 08-27-2015, 09:59 PM

T korinek I sent the PayPal money for the harness. Send it asap please!!

GonicGM · 08-29-2015, 08:22 AM

Would have interest in the rear spring shackles. These would be the style folded with two rivets. Not the hangers, the shackles. Image please.

**t korinek** · 08-29-2015, 07:12 PM

74customk10 will ship monday

Gonicgm It will be quite a while before I get to tearing into the underside of this thing.

Thanks,
Tom

**old Rusty C10** · 08-30-2015, 08:49 AM

is the upper panel on the core support still there I need that

08-17-2015, 08:34 PM	#27
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting 74 3/4 ton truck T koronek that's more than,I was looking to spend on a gauge cluster, thanks. Side note, how much for the engine bay wiring? I need both sides the lights and the engine harness. __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

08-17-2015, 09:51 PM	#28
fergi62 Registered User Join Date: Mar 2013 Location: marked tree arkansas Posts: 99	Re: Parting 74 3/4 ton truck hello, does the truck have the tank valve still on it, for the dual tanks? if it's original should have 6 ports and a single wire to it. if so could you check the condition and let me know what you would need for it? thanks michael __________________ for my yoke is easy and my burdens light. J.C. matthew 11:30

08-17-2015, 10:29 PM	#29
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck I'll check availability of the valve & condition of wiring harness Thanks Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-19-2015, 05:10 PM	#30
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck Heres some pics of the wiring, Looks pretty much intact, i can see a few splices on it, didn't have a chance to check out the valve. Also found a rear of cab molding piece in pretty decent shape $20 + shipping,softballnrd27 has first shot at it. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-19-2015, 06:18 PM	#31
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting 74 3/4 ton truck Splices are fine, as I have a 75 harness and it won't work... how much shipped to 47586? On edit my wiring manual shows a "time delay relay" next to the junction block, assuming it mounts to the fire wall. If it's possible include this, as i have no idea what it is. I appreciate the help. It's impossible to find pics of what goes where on these older ones. The junction block on the engine side has 10 wires coming out of it. __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump. Last edited by 74CustomK20; 08-19-2015 at 06:34 PM.

08-20-2015, 01:31 PM	#34
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: Parting 74 3/4 ton truck im looking for a bracket on the right side. it bolts to the rad support and the right fender. it holds the lower grill valence in place. do you have that?

08-21-2015, 12:45 AM	#35
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck GMClowsierra I do have that little bracket its off. $16.70 shipped __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-21-2015, 10:42 AM	#36
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: Parting 74 3/4 ton truck total? that would be great. need pay information

08-21-2015, 10:02 PM	#37
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting 74 3/4 ton truck Ever figure out the wiring harness cost? __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

08-21-2015, 10:10 PM	#38
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck How about $70 shipped for both under hood harnesses __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-21-2015, 10:36 PM	#39
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting 74 3/4 ton truck Alright, I'll put the money in the bank tomorrow and send it your way tomorrow morning. I'm pretty sure I have your paypal. __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

08-22-2015, 04:04 AM	#40
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: Parting 74 3/4 ton truck Are the door panels still available? Are they sand tan? And it looks like both have a tiny hole drilled in them. Any idea what thats for? Both sides seem to have it in the same spot. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

08-22-2015, 11:10 AM	#41
fergi62 Registered User Join Date: Mar 2013 Location: marked tree arkansas Posts: 99	Re: Parting 74 3/4 ton truck tom, did you get a chance to check on the tank valve yet? __________________ for my yoke is easy and my burdens light. J.C. matthew 11:30

08-22-2015, 07:36 PM	#42
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck fergie, there is no tank valve on there, I have an aftermarket pollak 6 port valve with 1 wire hook up that I have had as a spare I'd sell it for $70 shipped The door panels are pearl color. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-22-2015, 09:12 PM	#43
fergi62 Registered User Join Date: Mar 2013 Location: marked tree arkansas Posts: 99	Re: Parting 74 3/4 ton truck if you've checked it and it's good i'll take it. paypal o.k.? if so i need your info to send it to. thanks michael __________________ for my yoke is easy and my burdens light. J.C. matthew 11:30



Register or Log In To remove these advertisements.

08-23-2015, 08:34 PM	#44
Old57 Registered User Join Date: Apr 2015 Location: Wichita Kansas Posts: 455	Re: Parting 74 3/4 ton truck I'm looking for a good pair of spring hangers for the front of the rear springs. Mine are rusted. Are these in good shape? If so, how much do you want for those?

08-24-2015, 01:29 PM	#45
gmclowsierra Registered User Join Date: Mar 2008 Location: williamsport,pa Posts: 329	Re: Parting 74 3/4 ton truck I need a paypal account to get that bracket.

08-24-2015, 09:50 PM	#46
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck gmclowsierra Here's a pic of what I think your looking for passenger side Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-27-2015, 09:59 PM	#47
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting 74 3/4 ton truck T korinek I sent the PayPal money for the harness. Send it asap please!! __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

08-29-2015, 08:22 AM	#48
GonicGM Registered User Join Date: Mar 2014 Location: Rochester, NH Posts: 168	Re: Parting 74 3/4 ton truck Would have interest in the rear spring shackles. These would be the style folded with two rivets. Not the hangers, the shackles. Image please. __________________ 83 K30 SRW 350 TH400 NP205 4.10 9' Fisher 85 K30 SRW 350 TH400 NP205 4.10 87 V3500 Dually 454 TBI SM465 NP205 4.10 9' Fisher 83 K2500 350 TH700R4 8600GVW Dual Tank 4.10 1973 Cheyenne Super 30 DRW Std Cab Z83 4.10 1976 Silverado C30 Std Cab 4.10 DRW (4 sale)

08-29-2015, 07:12 PM	#49
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Parting 74 3/4 ton truck 74customk10 will ship monday Gonicgm It will be quite a while before I get to tearing into the underside of this thing. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-30-2015, 08:49 AM	#50
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Parting 74 3/4 ton truck is the upper panel on the core support still there I need that __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

Register or Log In To remove these advertisements.