New 1960-66 swb fleetside bed kits! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nsanehotrodz · 12-23-2015, 08:56 PM

Quote:

Originally Posted by jweb

How well do those fenders fit? All of the fenders I have seen don't look very good at the front, where the grill surround is spot welded in.

Quote:

Originally Posted by racecougar

Besides the front, could you get a pic or two showing how the fenders mate up to the rockers?

These fenders are new and bolted up to a original paint cab. Everything lines up really good with our new front sheet metal.

Nsanehotrodz · 12-23-2015, 09:14 PM

Here are a few pics of the '65 we are finishing. The cab and front sheet metal were painted by another shop then sent to us to finish the truck with a new bed and final assembly. The front sheet metal on this truck was scuffed and painted with zero bodywork.

Brad54 · 12-23-2015, 09:49 PM

Just curious: does your shop build other makes and models, or strictly '60-'66 Chevy trucks?

-Brad

Nsanehotrodz · 12-23-2015, 10:57 PM

Quote:

Originally Posted by Brad54

Just curious: does your shop build other makes and models, or strictly '60-'66 Chevy trucks?

-Brad

We build whatever the customer wants. For example right now we have a 1957 Bel Air Convertible factory fuel injection car, 1965 Ford Falcon, 1968 C10, and a 1958 GMC we are building. The trucks seem to be the most popular right now. If I can help you with anything let me know.

flashed · 12-23-2015, 11:06 PM

When would be a good time to call you to talk about my Vintage Air situation in my 72 Chevy truck ?

Nsanehotrodz · 12-24-2015, 06:56 PM

Quote:

Originally Posted by flashed

When would be a good time to call you to talk about my Vintage Air situation in my 72 Chevy truck ?

I will be back in the shop Monday morning. So anytime next week will work.

Vinceg · 12-30-2015, 11:33 AM

I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

Joemomma1 · 12-30-2015, 12:43 PM

Quote:

Originally Posted by Vinceg

I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

Go with short. The fewer long beds in the world the better!

Vinceg · 12-30-2015, 01:35 PM

I just figure that where I'm at right now it might not be that much more work. I also didn't mention that I'm up here in Canada. I always find it interesting to see how much more we end up paying. That and the dollar is killing the price also. It suck!

Nsanehotrodz · 12-30-2015, 06:05 PM

Quote:

Originally Posted by Vinceg

I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

I don't have a date set on the LWB bedsides right now. Our swb fleet bedsides are on sale for $510ea. Let me know if we can help you! Thanks

j.kirn · 12-30-2015, 07:44 PM

I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

kenwkirk · 12-31-2015, 11:13 PM

The new bedsides look "GREAT" !!!!!!! it would have been nice if they could/would have been slightly modified so that the rear tires would have had the appearance of being more centered in the wheel well ???? ---- with that being said ,,, is there any simple way to move the rear-end back a couple of inches or so in order to squeeze more tire under it without it rubbing on the front edge ??? once again they do look NICE

Nsanehotrodz · 01-01-2016, 08:15 PM

Quote:

Originally Posted by kenwkirk

The new bedsides look "GREAT" !!!!!!! it would have been nice if they could/would have been slightly modified so that the rear tires would have had the appearance of being more centered in the wheel well ???? ---- with that being said ,,, is there any simple way to move the rear-end back a couple of inches or so in order to squeeze more tire under it without it rubbing on the front edge ??? once again they do look NICE

You could buy a set of adjustable trailing arms from www.pbfab.com

j.kirn · 01-03-2016, 11:34 PM

Quote:

Originally Posted by j.kirn

I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

????????????

LT1 Burb · 01-04-2016, 12:48 AM

I worked on my bedsides today, the wheel well holes were slightly off but no biggie.

MikeN · 01-04-2016, 06:28 PM

Quote:

Originally Posted by j.kirn

????????????

Nsanehotrodz · 01-04-2016, 08:16 PM

Quote:

Originally Posted by j.kirn

I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

Yes, the parts we sell fit very good!

sampsmit000 · 01-04-2016, 08:27 PM

Do you sell fenders?

Nsanehotrodz · 01-04-2016, 08:32 PM

Quote:

Originally Posted by sampsmit000

Do you sell fenders?

Yes sir!

NevEno · 01-04-2016, 08:54 PM

Looking forward to seeing the new bed in person!

pappy 2 · 01-04-2016, 09:31 PM

Better save the doors on that truck, they just tore down the No. Loup Lumber Yard last year, to put up a new retail seed building. Spent a lot of my youth in No Loup, had better looking girls there than in Ord.
Pappy 2

j.kirn · 01-05-2016, 12:12 AM

Quote:

Originally Posted by Nsanehotrodz

Yes, the parts we sell fit very good!

Sir you did not answer my whole question

Nsanehotrodz · 01-05-2016, 10:05 AM

Quote:

Originally Posted by NevEno

Looking forward to seeing the new bed in person!

Thanks for the order!

Quote:

Originally Posted by pappy 2

Better save the doors on that truck, they just tore down the No. Loup Lumber Yard last year, to put up a new retail seed building. Spent a lot of my youth in No Loup, had better looking girls there than in Ord.
Pappy 2

I'm going to leave the cab/doors alone on the '62 and spray the new panels to match the patina.

Quote:

Originally Posted by j.kirn

Sir you did not answer my whole question

Which part did I not answer?

kenwkirk · 01-05-2016, 01:36 PM

Thank you Very Much sir ------ I wasn't really aware of that option ----- this is definitely a budget build --- with that being taken into consideration can I change just the trailing arms or is there more that is necessary in order to accomplish this ??? any help would be GREATLY APPRECIATED ---- anyone else cares to chime in feel free to ----- once again THANKS VERY MUCH

**Chevy Fleetside** · 01-05-2016, 01:46 PM

Quote:

Originally Posted by Nsanehotrodz

Which part did I not answer?

the one about the parts being from overseas. Everything comes from overseas.

12-23-2015, 09:14 PM	#27
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: New 1960-66 swb fleetside bed kits! Here are a few pics of the '65 we are finishing. The cab and front sheet metal were painted by another shop then sent to us to finish the truck with a new bed and final assembly. The front sheet metal on this truck was scuffed and painted with zero bodywork. __________________ www.nsanehotrodz.com customerservice@nsanehotrodz.com 865-761-0460 Tennessee's #1 HotRod Shop!

12-23-2015, 09:49 PM	#28
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: New 1960-66 swb fleetside bed kits! Just curious: does your shop build other makes and models, or strictly '60-'66 Chevy trucks? -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

12-23-2015, 11:06 PM	#30
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: New 1960-66 swb fleetside bed kits! When would be a good time to call you to talk about my Vintage Air situation in my 72 Chevy truck ?

12-30-2015, 11:33 AM	#32
Vinceg Registered User Join Date: Nov 2014 Location: Red Deer, Alberta, Canada Posts: 166	Re: New 1960-66 swb fleetside bed kits! I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

12-30-2015, 01:35 PM	#34
Vinceg Registered User Join Date: Nov 2014 Location: Red Deer, Alberta, Canada Posts: 166	Re: New 1960-66 swb fleetside bed kits! I just figure that where I'm at right now it might not be that much more work. I also didn't mention that I'm up here in Canada. I always find it interesting to see how much more we end up paying. That and the dollar is killing the price also. It suck!

12-30-2015, 07:44 PM	#36
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: New 1960-66 swb fleetside bed kits! I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

12-31-2015, 11:13 PM	#37
kenwkirk Registered User Join Date: May 2012 Location: Sunny South Posts: 52	Re: New 1960-66 swb fleetside bed kits! The new bedsides look "GREAT" !!!!!!! it would have been nice if they could/would have been slightly modified so that the rear tires would have had the appearance of being more centered in the wheel well ???? ---- with that being said ,,, is there any simple way to move the rear-end back a couple of inches or so in order to squeeze more tire under it without it rubbing on the front edge ??? once again they do look NICE

01-04-2016, 12:48 AM	#40
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: New 1960-66 swb fleetside bed kits! I worked on my bedsides today, the wheel well holes were slightly off but no biggie. Attached Images

01-04-2016, 08:27 PM	#43
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: New 1960-66 swb fleetside bed kits! Do you sell fenders? __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

01-04-2016, 08:54 PM	#45
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: New 1960-66 swb fleetside bed kits! Looking forward to seeing the new bed in person! __________________ You can find me on Instagram @neveno_cten

01-04-2016, 09:31 PM	#46
pappy 2 Registered User Join Date: Aug 2015 Location: ord, NE. Posts: 99	Re: New 1960-66 swb fleetside bed kits! Better save the doors on that truck, they just tore down the No. Loup Lumber Yard last year, to put up a new retail seed building. Spent a lot of my youth in No Loup, had better looking girls there than in Ord. Pappy 2

01-05-2016, 01:36 PM	#49
kenwkirk Registered User Join Date: May 2012 Location: Sunny South Posts: 52	Re: New 1960-66 swb fleetside bed kits! Thank you Very Much sir ------ I wasn't really aware of that option ----- this is definitely a budget build --- with that being taken into consideration can I change just the trailing arms or is there more that is necessary in order to accomplish this ??? any help would be GREATLY APPRECIATED ---- anyone else cares to chime in feel free to ----- once again THANKS VERY MUCH



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.