Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-08-2017, 07:44 PM | #26 |
Registered User
Join Date: Oct 2016
Location: Kentucky
Posts: 385
|
Re: Got Cragars, will this backspacing work or do I need to exchange?
Sooooo.. sorry to triple post but we have come up with a viable solution after bolting up the inner fenders to the bed. I think it will have just enough clearance to only dig into the sidewall on a 15x10 Cragar S/S with 4.25" backspacing and 295/50/15 tire when under load or hitting a large bump. (Not at current ride height.. read above to see how I'm going to raise the truck up.) To gain even more clearance so that it hopefully never happens, we(my dad) are going to fabricate up a shim between the bedside and bolt-in fender made out of 3/16" steel. This should push the bedside out just enough to the extra safety and comfort of running a wheel with this offset + wide tire.
If we are wrong or totally backwards, go ahead and post. I have read every comment and taken all suggestions and situations into consideration and theory with my dad. I think after the shim is welded in, seam sealed, and then bedlined it won't look a bit out of place.
__________________
1978 Hawaiian Blue GMC 454/Tremec TKO 500 BUILD THREAD |
01-09-2017, 12:08 AM | #27 |
Diggin The SquareLife
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
|
Re: Got Cragars, will this backspacing work or do I need to exchange?
I wouldnt shim the bed.....jus get correct wheels
|
01-09-2017, 11:04 AM | #28 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Got Cragars, will this backspacing work or do I need to exchange?
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
01-09-2017, 11:53 AM | #29 |
Frequent Flyer
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
|
Re: Got Cragars, will this backspacing work or do I need to exchange?
^ This.
I'd be leary of "shimming" the bed side out. Could tweak a lot of things. It could also cause paint and/or body work as well with the bedside flexing. |
Bookmarks |
Tags |
15x10, 15x8, cragar, tires, wheels |
|
|