Need utility body help 1967-72 & build thread - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-28-2018, 09:15 PM

I didn't read the whole thread, but you don't know what brand the body is? These companies keep replacement parts. The bodies aren't year specific, or even brand. If you can't identify the maker or if they no longer supply the exact door and other parts, you can buy any other brand door as close if not the same size. If different you can alter that.

fatblockvelle · 01-28-2018, 10:15 PM

Quote:

Originally Posted by special-K

I didn't read the whole thread, but you don't know what brand the body is? These companies keep replacement parts. The bodies aren't year specific, or even brand. If you can't identify the maker or if they no longer supply the exact door and other parts, you can buy any other brand door as close if not the same size. If different you can alter that.

There are no markings on the body anywhere. If I could figure that out I would have one hell of a jump start on my quest. Going to make some calls tomorrow to random body companies and get a feel for what they can get \ make. I found the truck smashed and there were no doors... So kinda starting with nothing.

Thank you all for the replies

**leddzepp** · 01-28-2018, 10:23 PM

Here is one that I have, similar to yours.

**leddzepp** · 01-28-2018, 10:24 PM

Another

fatblockvelle · 01-29-2018, 01:04 PM

Quote:

Originally Posted by leddzepp

Another

yes very close .. but yours looks to be a high box... mike is lower.

fatblockvelle · 01-29-2018, 01:05 PM

...

fatblockvelle · 01-30-2018, 01:00 PM

called and emailed ROB from SKAUG truck Bodies and it is one of his boxes!!!!! Going to get him some dimensions tonight and he is going to make me some doors!!! Thanks for all of your help.

Killer Bee · 01-30-2018, 01:05 PM

good work detectives, round of back pats please

tenacity pays off sometimes

**Joesjunk** · 01-30-2018, 01:36 PM

That's awesome, it sure looked like a Skaug brand

Old Truck Man · 01-30-2018, 03:16 PM

I have this one. It had a locked up 327 when I bought it. I installed a 350 and put a small base Rochester 2 bbl carb on it. licensed and insured it. turned out to have 456 rear gears and guzzled gas. So I parked it.

**special-K** · 01-30-2018, 07:34 PM

They probably already have the doors. I have bought parts to repair my Reading boxes. I priced a whole replacement side for the low profile body I had on a truck that got wrecked. That wheel opening should be available, unless they look different now.

**leddzepp** · 01-30-2018, 07:42 PM

Quote:

Originally Posted by fatblockvelle

yes very close .. but yours looks to be a high box... mike is lower.

Its the same height, comes up to the back of the cab in the same spot as yours. It’s on a lifted K truck so it appears taller.

fatblockvelle · 02-05-2018, 01:30 PM

Quote:

Originally Posted by leddzepp

its the same height, comes up to the back of the cab in the same spot as yours. It’s on a lifted k truck so it appears taller.

the door on the box is shorter.

**leddzepp** · 02-05-2018, 02:03 PM

Quote:

Originally Posted by fatblockvelle

the door on the box is shorter.

It’s configured differently, but it sits at the same height. Either way it goes to scrap if someone doesn’t buy it soon

fatblockvelle · 02-05-2018, 05:46 PM

Quote:

Originally Posted by leddzepp

It’s configured differently, but it sits at the same height. Either way it goes to scrap if someone doesn’t buy it soon

I didnt even know it was for sale. lol

fatblockvelle · 02-07-2018, 10:41 AM

UPDATE . Doors are being made and got all the lights to work. I didnt know they made some "side markers" as reflectors only ... Was that a C20/c30 thing?

**Steeveedee** · 02-07-2018, 10:54 AM

I think that that is a thing done with truck that came as a cab and chassis, like the service body truck you have, or a flat bed added after delivery to the customer. I do not recall seeing lights on service body sides, only stop and tail at the ends; there may well have been, but I don't recall that.

fatblockvelle · 02-07-2018, 11:12 AM

Quote:

Originally Posted by Steeveedee

I think that that is a thing done with truck that came as a cab and chassis, like the service body truck you have, or a flat bed added after delivery to the customer. I do not recall seeing lights on service body sides, only stop and tail at the ends; there may well have been, but I don't recall that.

You could be right... I thought I had a side marker out .... so i went to pop the socket out..... AND ITS LIKE A SOLID BLOCK OFF. Just had never seen it.

fatblockvelle · 03-21-2018, 12:09 PM

Making some headway. Box is off now ready for paint.

**special-K** · 03-21-2018, 12:36 PM

Looking good! '68 and '69 had reflectors. Later in '69 came the lights. There is an "A" side and a "B" side option on utility beds. Horizontal box can run all the way back over top of the rear side bin with a short door or runs to the rear side bin with a full height door. Most come through standard with an A/B combination. That's how I always ordered mine and the ones I bought used were like that

fatblockvelle · 03-21-2018, 09:06 PM

Quote:

Originally Posted by special-K

Looking good! '68 and '69 had reflectors. Later in '69 came the lights. There is an "A" side and a "B" side option on utility beds. Horizontal box can run all the way back over top of the rear side bin with a short door or runs to the rear side bin with a full height door. Most come through standard with an A/B combination. That's how I always ordered mine and the ones I bought used were like that

Hey special K , Thanks for the info! My 69 was like that , but I went witht he same on both sides as im air bagging the truck and the center top box is going to be needed for tire clearance. things are finally starting to roll good! stay tuned for the bag build, and the new shop truck!!!! Thanks again!

**KevinK7** · 03-22-2018, 10:28 AM

I figured I'd jump in.
I just got this '68 from California. It apparently spent it's life in Arizona (as a plumber's truck).

The SPID shows it came as "Cab & Chassis" so I believe the Utility ("Servis" brand) was installed early on.

(Nevada tags since I'm leaving it there for the time being : )

fatblockvelle · 03-22-2018, 10:31 AM

Quote:

Originally Posted by KevinK7

I figured I'd jump in.
I just got this '68 from California. It apparently spent it's life in Arizona (as a plumber's truck).

The SPID shows it came as "Cab & Chassis" so I believe the Utility ("Servis" brand) was installed early on.

(Nevada tags since I'm leaving it there for the time being : )

OH HELL YEA!!!

fatblockvelle · 04-09-2018, 11:03 AM

Little update on the shop truck. Rear is notched and bagged, going to get started on the drop spindles and front bags this week!!!

**KevinK7** · 04-09-2018, 12:12 PM

Those are some serious CLEAN welds, ...nice work

01-28-2018, 09:15 PM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need utility body help 1967-72. Truck I just picked up I didn't read the whole thread, but you don't know what brand the body is? These companies keep replacement parts. The bodies aren't year specific, or even brand. If you can't identify the maker or if they no longer supply the exact door and other parts, you can buy any other brand door as close if not the same size. If different you can alter that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-28-2018, 10:23 PM	#28
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,058	Re: Need utility body help 1967-72. Truck I just picked up Here is one that I have, similar to yours. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-28-2018, 10:24 PM	#29
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,058	Re: Need utility body help 1967-72. Truck I just picked up Another Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-29-2018, 01:05 PM	#31
fatblockvelle Registered User Join Date: Jul 2008 Location: auburn ma Posts: 216	Re: Need utility body help 1967-72. Truck I just picked up ... Attached Images __________________ 1970 chevelle 1971 blazer 1972 c20 custom camper 1931 ford A coupe.

01-30-2018, 01:00 PM	#32
fatblockvelle Registered User Join Date: Jul 2008 Location: auburn ma Posts: 216	Re: Need utility body help 1967-72. Truck I just picked up called and emailed ROB from SKAUG truck Bodies and it is one of his boxes!!!!! Going to get him some dimensions tonight and he is going to make me some doors!!! Thanks for all of your help. __________________ 1970 chevelle 1971 blazer 1972 c20 custom camper 1931 ford A coupe.

01-30-2018, 01:05 PM	#33
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,818	Re: Need utility body help 1967-72. Truck I just picked up good work detectives, round of back pats please tenacity pays off sometimes __________________ *I started out with nothing - and I still have most of it*

01-30-2018, 01:36 PM	#34
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,715	Re: Need utility body help 1967-72. Truck I just picked up That's awesome, it sure looked like a Skaug brand __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-30-2018, 03:16 PM	#35
Old Truck Man Registered User Join Date: Feb 2014 Location: Pocahontas Arkansas Posts: 684	Re: Need utility body help 1967-72. Truck I just picked up I have this one. It had a locked up 327 when I bought it. I installed a 350 and put a small base Rochester 2 bbl carb on it. licensed and insured it. turned out to have 456 rear gears and guzzled gas. So I parked it. Attached Images

01-30-2018, 07:34 PM	#36
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need utility body help 1967-72. Truck I just picked up They probably already have the doors. I have bought parts to repair my Reading boxes. I priced a whole replacement side for the low profile body I had on a truck that got wrecked. That wheel opening should be available, unless they look different now. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-07-2018, 10:41 AM	#41
fatblockvelle Registered User Join Date: Jul 2008 Location: auburn ma Posts: 216	Re: Need utility body help 1967-72. Truck I just picked up UPDATE . Doors are being made and got all the lights to work. I didnt know they made some "side markers" as reflectors only ... Was that a C20/c30 thing? Attached Images __________________ 1970 chevelle 1971 blazer 1972 c20 custom camper 1931 ford A coupe.

02-07-2018, 10:54 AM	#42
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,783	Re: Need utility body help 1967-72. Truck I just picked up I think that that is a thing done with truck that came as a cab and chassis, like the service body truck you have, or a flat bed added after delivery to the customer. I do not recall seeing lights on service body sides, only stop and tail at the ends; there may well have been, but I don't recall that. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

03-21-2018, 12:09 PM	#44
fatblockvelle Registered User Join Date: Jul 2008 Location: auburn ma Posts: 216	Re: Need utility body help 1967-72. Truck I just picked up Making some headway. Box is off now ready for paint. Attached Images __________________ 1970 chevelle 1971 blazer 1972 c20 custom camper 1931 ford A coupe.

03-21-2018, 12:36 PM	#45
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need utility body help 1967-72. Truck I just picked up Looking good! '68 and '69 had reflectors. Later in '69 came the lights. There is an "A" side and a "B" side option on utility beds. Horizontal box can run all the way back over top of the rear side bin with a short door or runs to the rear side bin with a full height door. Most come through standard with an A/B combination. That's how I always ordered mine and the ones I bought used were like that __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-22-2018, 10:28 AM	#47
KevinK7 Senior Member Join Date: Oct 2017 Location: Hudson Valley, New York Posts: 652	Re: Need utility body help 1967-72. Truck I just picked up I figured I'd jump in. I just got this '68 from California. It apparently spent it's life in Arizona (as a plumber's truck). The SPID shows it came as "Cab & Chassis" so I believe the Utility ("Servis" brand) was installed early on. (Nevada tags since I'm leaving it there for the time being : )

04-09-2018, 11:03 AM	#49
fatblockvelle Registered User Join Date: Jul 2008 Location: auburn ma Posts: 216	Re: Need utility body help 1967-72. Truck I just picked up Little update on the shop truck. Rear is notched and bagged, going to get started on the drop spindles and front bags this week!!! Attached Images __________________ 1970 chevelle 1971 blazer 1972 c20 custom camper 1931 ford A coupe.



Register or Log In To remove these advertisements.

04-09-2018, 12:12 PM	#50
KevinK7 Senior Member Join Date: Oct 2017 Location: Hudson Valley, New York Posts: 652	Re: Need utility body help 1967-72. Truck I just picked up Those are some serious CLEAN welds, ...nice work

Register or Log In To remove these advertisements.