VIBRATION ISSUES - I'm at a loss - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4u2nv · 11-04-2018, 08:29 AM

You stated that you had the driveshaft made
I would be taking it out and getting it checked for proper balance
Someone might of screwed up there !!!!!!!

Houston Ben · 11-04-2018, 08:04 PM

Hi 4u2nv,
Thanks for the response. The DS was made at a reputable shop, but if the trans angle change does not help, I will definitely get it checked.

I was able to do a quick pull to 76 and it was MUCH smoother than before the trans drop and new u-joint.

11-04-2018, 08:29 AM	#26
4u2nv Registered User Join Date: Oct 2018 Location: Ontario Peterborough Posts: 813	Re: VIBRATION ISSUES - I'm at a loss You stated that you had the driveshaft made I would be taking it out and getting it checked for proper balance Someone might of screwed up there !!!!!!!

11-04-2018, 08:04 PM	#27
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: VIBRATION ISSUES - I'm at a loss Hi 4u2nv, Thanks for the response. The DS was made at a reputable shop, but if the trans angle change does not help, I will definitely get it checked. I was able to do a quick pull to 76 and it was MUCH smoother than before the trans drop and new u-joint. __________________ 1986 C10, 2011 5.3 w/6L80, 3.42 w/ Detroit TrutTrac Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584532



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.