MD the panelburb getting cut up - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 06-11-2019, 03:27 PM

Quote:

Originally Posted by Madkidd007

Since Clayton is passing, have you had an opportunity to get underneath it yet? Rain has been crazy here also, I’d like to see the underside where it bolts to the floor support since I see rust lines on the exterior paint down low. Thank you.

I have not but will try to do so this afternoon and post pics.

**richard2717** · 06-11-2019, 05:04 PM

Quote:

Originally Posted by richard2717

I have not but will try to do so this afternoon and post pics.

The inner bottom of the entire burb is rusty rotten. Where it bolts to the floor support is rotten but here are some pics.

.

Madkidd007 · 06-11-2019, 08:29 PM

Quote:

Originally Posted by richard2717

The inner bottom of the entire burb is rusty rotten. Where it bolts to the floor support is rotten but here are some pics.

.

Definitely interested. Was hoping to find a better one to fix my passenger side and use the original to build a driver side. Not your problem but with the bottom eat up do you have any wiggle room? Also any experience shipping something of that side to know approximate weight for a shipping “estimate”? Also will probably want to buy the passenger front and rear upper door frames. Obviously cut for shipping

**richard2717** · 06-07-2019, 03:22 PM

The 3rd door has some body filler in the lower section of the outside panel. Lot of surface rust along the bottom perimeter but the only hole is on the inside edge of the door closest to the lower hinge. It looks like it started as a drilled hole but has gotten away from that. It has a speaker hole cut as well. Two of the pics are looking at the inside bottom of the door. You can see a lot of surface rust but I do not see anything major. That may change with a blaster so I will let you decide

.

**richard2717** · 06-07-2019, 03:26 PM

A few more pics

.
Name: 20190607_150148_resized.jpg
Views: 820
Size: 51.1 KB

Name: 20190607_150233_resized.jpg
Views: 809
Size: 69.3 KB

Speaking of blaster..... While out there I thought I was losing my mind but it sounded like a shotgun went off and I got hit in the back with something. I looked around and did not see anything at 1st. I was looking for somebody not something. This is what I found. This is the rolling frame from the burb I got from you. Any warranty on them tires?

Luckily I have a spare

Name: 20190607_145844_resized.jpg
Views: 777
Size: 86.7 KB

Name: 20190607_145902_resized.jpg
Views: 779
Size: 86.9 KB

Name: 20190607_145908_resized.jpg
Views: 759
Size: 78.8 KB

**71blksuper4x4** · 06-11-2019, 07:53 AM

Richard, any chance of getting a foam sound deadener from one of the roof supports? I have either tossed mine, or misplaced them. Trevor

**richard2717** · 06-11-2019, 03:25 PM

Quote:

Originally Posted by 71blksuper4x4

Richard, any chance of getting a foam sound deadener from one of the roof supports? I have either tossed mine, or misplaced them. Trevor

Let me see what I can come up with and will post back

**richard2717** · 06-11-2019, 05:01 PM

Quote:

Originally Posted by richard2717

Let me see what I can come up with and will post back

How many do you need? I still have 2 roof bows in the green one I have been cutting up. And just to clarify, you are talking about the squarish foam strip that sits in the top of the bow to keep it from rubbing metal on metal with the roof panel? It might take me a day or so to get them pulled out. I cut the complete roof off of that one but have it strapped in place to keep the inside dry. Have to move a FEW THINGS LOL to get to the straps.

Richard

**ShortbedClayton** · 06-11-2019, 08:10 AM

Man Richard that tire is crazy.. and to think I drove it around my property before disassemble. Glad your safe but I do believe the 10 day warranty is expired.... 😬 but I think I’m gonna pass on the pillar and door. Currently getting my square ready for resale and the axle swap motor swap is eating my funds up quicker than expected. Thanks for taking the time to get the pics
Posted via Mobile Device

**richard2717** · 06-11-2019, 03:26 PM

Quote:

Originally Posted by ShortbedClayton

Man Richard that tire is crazy.. and to think I drove it around my property before disassemble. Glad your safe but I do believe the 10 day warranty is expired.... 😬 but I think I’m gonna pass on the pillar and door. Currently getting my square ready for resale and the axle swap motor swap is eating my funds up quicker than expected. Thanks for taking the time to get the pics
Posted via Mobile Device

I knew I shoulda gotten the extended warranty, happens every time i don't

Thanks for letting me know on the other parts

vinro · 06-12-2019, 11:38 PM

Sent a PM on...
1. wing windows
2. grille trim and headlight bezels
3. yellow parking light lenses

**richard2717** · 06-13-2019, 10:50 AM

Quote:

Originally Posted by vinro

Sent a PM on...
1. wing windows
2. grille trim and headlight bezels
3. yellow parking light lenses

Vin
Got your pm and will get these pulled today to check overall condition.

Thanks

**richard2717** · 06-13-2019, 04:33 PM

Quote:

Originally Posted by vinro

Sent a PM on...
1. wing windows
2. grille trim and headlight bezels
3. yellow parking light lenses

Posting pics of #2 & #3 will be a little bit before I can get the wings out to assess condition. prices are plus shipping

lenses are nice $20 for pair

Grill hoops are decent driver but do have some nicks and dings $45 for pair no clips, they all broke off

Headlight bezels are ok for driver $20

Grill bowtie in nice condition but painted black $30

.

**richard2717** · 06-13-2019, 04:34 PM

grill hoops

.

**richard2717** · 06-13-2019, 04:35 PM

bowtie

.

waylonbud · 06-14-2019, 10:08 AM

Hello,
I looked thru the other listing you mentioned and did not see the hood chrome lip trim or the passenger side fender eyebrow, (drivers looks beat).I would be interested in the condition of these and what shipping would run to 37303. Thank you.

**richard2717** · 06-14-2019, 10:35 AM

Quote:

Originally Posted by waylonbud

Hello,
I looked thru the other listing you mentioned and did not see the hood chrome lip trim or the passenger side fender eyebrow, (drivers looks beat).I would be interested in the condition of these and what shipping would run to 37303. Thank you.

driver side definitely no good. The other 2 pcs are good enough for DD if I can get them removed without damage. I will get pics and post it up this afternoon

**richard2717** · 06-14-2019, 02:16 PM

Quote:

Originally Posted by waylonbud

Hello,
I looked thru the other listing you mentioned and did not see the hood chrome lip trim or the passenger side fender eyebrow, (drivers looks beat).I would be interested in the condition of these and what shipping would run to 37303. Thank you.

before I pull them off take a look at these closer pics. Both pcs are banged up pretty good. If these clips are as good as the grill ones they will all probably break off as well. I would want $25 for the pair plus actual shipping

.

waylonbud · 06-14-2019, 10:42 PM

Thanks for the pics. The hood trim looks a bit rougher than what I got, but I think I could use the fender eyebrow. Let me know the total and how you want payment. Thanks

**richard2717** · 06-15-2019, 10:37 AM

Quote:

Originally Posted by waylonbud

Thanks for the pics. The hood trim looks a bit rougher than what I got, but I think I could use the fender eyebrow. Let me know the total and how you want payment. Thanks

Eyebrow got damaged by clip spin this morning trying to remove it. Sorry

waylonbud · 06-15-2019, 12:18 PM

Alright, thanks for trying.

**richard2717** · 06-15-2019, 12:39 PM

ok so here is the B pillar. Still have to cut the top off to the left of the blue tape for shipping. I will pm total with shipping for everything.

Richard

.

**richard2717** · 06-15-2019, 03:42 PM

Ground the bottom of the 3rd door to show the issues

**richard2717** · 06-15-2019, 03:43 PM

more pics

olblue60@aol.com · 07-08-2019, 06:19 AM

Hey Richard,
Whats the condition of the front bumper and shipping? I'm looking for a good driver part. My pickup got hit and run. Hoping all is good with you!

John

06-07-2019, 03:22 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up The 3rd door has some body filler in the lower section of the outside panel. Lot of surface rust along the bottom perimeter but the only hole is on the inside edge of the door closest to the lower hinge. It looks like it started as a drilled hole but has gotten away from that. It has a speaker hole cut as well. Two of the pics are looking at the inside bottom of the door. You can see a lot of surface rust but I do not see anything major. That may change with a blaster so I will let you decide . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-07-2019, 03:26 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up A few more pics . Speaking of blaster..... While out there I thought I was losing my mind but it sounded like a shotgun went off and I got hit in the back with something. I looked around and did not see anything at 1st. I was looking for somebody not something. This is what I found. This is the rolling frame from the burb I got from you. Any warranty on them tires? Luckily I have a spare __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-11-2019, 07:53 AM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: the panelburb getting cut up Richard, any chance of getting a foam sound deadener from one of the roof supports? I have either tossed mine, or misplaced them. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-11-2019, 08:10 AM	#9
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Re: the panelburb getting cut up Man Richard that tire is crazy.. and to think I drove it around my property before disassemble. Glad your safe but I do believe the 10 day warranty is expired.... 😬 but I think I’m gonna pass on the pillar and door. Currently getting my square ready for resale and the axle swap motor swap is eating my funds up quicker than expected. Thanks for taking the time to get the pics Posted via Mobile Device

06-12-2019, 11:38 PM	#11
vinro Registered User Join Date: Jan 2018 Location: america Posts: 99	Re: the panelburb getting cut up Sent a PM on... 1. wing windows 2. grille trim and headlight bezels 3. yellow parking light lenses

06-13-2019, 04:34 PM	#14
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up grill hoops . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-13-2019, 04:35 PM	#15
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up bowtie . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-14-2019, 10:08 AM	#16
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: the panelburb getting cut up Hello, I looked thru the other listing you mentioned and did not see the hood chrome lip trim or the passenger side fender eyebrow, (drivers looks beat).I would be interested in the condition of these and what shipping would run to 37303. Thank you.

06-14-2019, 10:42 PM	#19
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: the panelburb getting cut up Thanks for the pics. The hood trim looks a bit rougher than what I got, but I think I could use the fender eyebrow. Let me know the total and how you want payment. Thanks

06-15-2019, 12:18 PM	#21
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: the panelburb getting cut up Alright, thanks for trying.

06-15-2019, 12:39 PM	#22
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up ok so here is the B pillar. Still have to cut the top off to the left of the blue tape for shipping. I will pm total with shipping for everything. Richard . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-15-2019, 03:42 PM	#23
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up Ground the bottom of the 3rd door to show the issues Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-15-2019, 03:43 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: the panelburb getting cut up more pics Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-08-2019, 06:19 AM	#25
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: the panelburb getting cut up Hey Richard, Whats the condition of the front bumper and shipping? I'm looking for a good driver part. My pickup got hit and run. Hoping all is good with you! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.