VA Parting out 87 GMC shortbed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82step4wd · 09-02-2019, 03:54 PM

How about upper grille molding shipped to 37709?

Gargoyle · 09-04-2019, 12:19 PM

Quote:

Originally Posted by 82step4wd

How about upper grille molding shipped to 37709?

There are a few noticeable dings:

Gargoyle · 09-04-2019, 12:21 PM

Hard to see in the pics

**nlped** · 09-05-2019, 09:21 AM

Just outta curiosity, do you have the spare tire ‘hanger’ pieces, jack & jack tools??

82step4wd · 09-05-2019, 02:57 PM

Thanks, I'm going to look for mine again this weekend, if I can't find it I'll get in touch with you.

Speeding Dakota · 09-05-2019, 08:34 PM

Quote:

Originally Posted by Gargoyle

All brackets and pulleys are sold.

Solid cab that has a dent in the roof on the driver side, drip rails have been shaved. No title, $125

Short bed that needs some work but is fairly solid overall, inside of bed is straight and solid. $125

Any outside pictures of the bed? What work does it need

Gargoyle · 09-06-2019, 07:33 AM

Quote:

Originally Posted by nlped

Just outta curiosity, do you have the spare tire ‘hanger’ pieces, jack & jack tools??

I don't have those pieces, thanks for asking.

Gargoyle · 09-06-2019, 07:44 AM

Bed pics, driver side needs a little work behind the wheel and above the tail light. Passenger side also has a spot behind the wheel and the bumper got pushed into the lower corner. PM me your number if you want more pics.

Gargoyle · 09-06-2019, 07:46 AM

Bed is SOLD

blizno23 · 09-09-2019, 06:49 PM

Does the seat fold forward?
If so, how much to ship to 94513?
Thanks!

Gargoyle · 09-10-2019, 03:14 PM

driver's door, passenger door panel and bench seat are SOLD

Gargoyle · 09-10-2019, 03:17 PM

Quote:

Originally Posted by blizno23

Does the seat fold forward?
If so, how much to ship to 94513?
Thanks!

It does fold but the seat is sold. Shipping cost would be really high for this anyways. You don't have a local source?

Madkidd007 · 09-18-2019, 02:02 PM

When you get the bed off the frame I may be interested in one of the fuel tank frame brackets

Gargoyle · 09-20-2019, 08:28 AM

Quote:

Originally Posted by Madkidd007

When you get the bed off the frame I may be interested in one of the fuel tank frame brackets

Alright, will be pulling the bed this weekend if all goes well.

Gargoyle · 09-22-2019, 08:58 PM

These are the rear bumper braces, have both inner sides that come straight back off the frame and the driver side outer brace. $30 for all plus shipping.

Gargoyle · 09-24-2019, 08:00 PM

Sold

Gargoyle · 09-25-2019, 09:19 AM

Will sell the whole cab or will cut the cab up for patches if there's any interest.

Gargoyle · 09-25-2019, 09:33 AM

Gas filler door, $10 plus shipping

Tan Visors, $15\pair plus shipping

Gargoyle · 09-27-2019, 09:12 AM

Cab is officially a short-timer, will be goner in another couple weeks.

Madkidd007 · 09-28-2019, 11:36 PM

Quote:

Originally Posted by Gargoyle

Cab is officially a short-timer, will be goner in another couple weeks.

Meaning scrapping or sold? I’d be interested in the underdash harness with the fuse box, got an idea for something custom on a 72.
I looked at the tank to see which bracket I needed but forgot and at work now.

Gargoyle · 09-29-2019, 07:45 AM

Quote:

Originally Posted by Madkidd007

Meaning scrapping or sold? I’d be interested in the underdash harness with the fuse box, got an idea for something custom on a 72.
I looked at the tank to see which bracket I needed but forgot and at work now.

Sold preferably but scrap is most likely. Willing to cut up for patches if the cab doesn't sell. Cab should be off the frame next weekend.

Underdash harness is there...

Madkidd007 · 09-29-2019, 09:16 PM

Quote:

Originally Posted by Gargoyle

Sold preferably but scrap is most likely. Willing to cut up for patches if the cab doesn't sell. Cab should be off the frame next weekend.

Underdash harness is there...

Any idea on price for the harness? May also be interested in the engine side of the underhood harness to save some work

Gargoyle · 09-29-2019, 11:19 PM

Quote:

Originally Posted by Madkidd007

Any idea on price for the harness? May also be interested in the engine side of the underhood harness to save some work

All I have is the under dash harness, $50 plus shipping and paypal fees.

Madkidd007 · 09-30-2019, 04:12 AM

Quote:

Originally Posted by Gargoyle

All I have is the under dash harness, $50 plus shipping and paypal fees.

I’ll take it for that, medium flat rate came up to $66.58 so large should be right at $70 if it won’t fit in a medium or costs more by weight than flat rate. Just let me know when you get it boxed up or I can pay for the harness and then the shipping once you know.
Also if you do have the Underhood in any condition or chopped off with 8” or more I’d still be interested in it.

Gargoyle · 09-30-2019, 07:22 AM

Alright, I'll be pulling the harness this week. Underhood harness was cut off at the fuse block with an inch or two of wire left at the block.

09-02-2019, 03:54 PM	#26
82step4wd Registered User Join Date: Jul 2018 Location: blaine tn Posts: 3	Re: Parting out 87 GMC shortbed How about upper grille molding shipped to 37709?

09-04-2019, 12:21 PM	#28
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Hard to see in the pics Attached Images

09-05-2019, 09:21 AM	#29
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Parting out 87 GMC shortbed Just outta curiosity, do you have the spare tire ‘hanger’ pieces, jack & jack tools?? __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-05-2019, 02:57 PM	#30
82step4wd Registered User Join Date: Jul 2018 Location: blaine tn Posts: 3	Re: Parting out 87 GMC shortbed Thanks, I'm going to look for mine again this weekend, if I can't find it I'll get in touch with you.

09-06-2019, 07:44 AM	#33
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Bed pics, driver side needs a little work behind the wheel and above the tail light. Passenger side also has a spot behind the wheel and the bumper got pushed into the lower corner. PM me your number if you want more pics. Attached Images Last edited by Gargoyle; 09-06-2019 at 10:03 AM.

09-06-2019, 07:46 AM	#34
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Bed is SOLD Attached Images Last edited by Gargoyle; 09-29-2019 at 03:03 PM.

09-09-2019, 06:49 PM	#35
blizno23 Registered User Join Date: Jul 2009 Location: Brentwood, CA Posts: 30	Re: Parting out 87 GMC shortbed Does the seat fold forward? If so, how much to ship to 94513? Thanks!

09-10-2019, 03:14 PM	#36
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed driver's door, passenger door panel and bench seat are SOLD Last edited by Gargoyle; 09-29-2019 at 03:03 PM.

09-18-2019, 02:02 PM	#38
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,238	Re: Parting out 87 GMC shortbed When you get the bed off the frame I may be interested in one of the fuel tank frame brackets __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

09-22-2019, 08:58 PM	#40
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed These are the rear bumper braces, have both inner sides that come straight back off the frame and the driver side outer brace. $30 for all plus shipping. Attached Images

09-24-2019, 08:00 PM	#41
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Sold Last edited by Gargoyle; 09-29-2019 at 03:05 PM.

09-25-2019, 09:19 AM	#42
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Will sell the whole cab or will cut the cab up for patches if there's any interest.

09-25-2019, 09:33 AM	#43
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Gas filler door, $10 plus shipping Tan Visors, $15\pair plus shipping

09-27-2019, 09:12 AM	#44
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Cab is officially a short-timer, will be goner in another couple weeks.

09-30-2019, 07:22 AM	#50
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 87 GMC shortbed Alright, I'll be pulling the harness this week. Underhood harness was cut off at the fuse block with an inch or two of wire left at the block.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.