47-59 What am I missing with getting this 235 running - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dsraven · 08-17-2021, 04:14 PM

well, then. in that case I would advance the sucker and give it a crank. you'll know if it's too far advanced, the starter will tell you.
have fun with the cameo while waitin for parts. got pic of that thing?

daveshilling · 08-17-2021, 08:12 PM

I was poking around in my spare parts bin for something else, and what did I find? A brand new coil I was unaware of...

threw in the new coil, turned it over while pumping the gas pedal, and the engine started up and stayed running at a high idle!

The coil I was using ran another truck, but I guess it just wasn't enough for this particular setup.

I suspected the spark, you all suspected the spark, and it was the spark. I don't have the radiator on so I only let it run briefly, but I consider that a success for now.. once it's reassembled, which should be sooner than later now, I can play around with the timing and idle.

Thanks for your help gentlemen!

daveshilling · 08-17-2021, 08:47 PM

Update: I found the source of the high idle, I left off the pcv/power brake vacuum fitting so I had a massive vacuum leak. I re-installed all of that, and then it wouldnt start again. I advanced the timing and it would run, but not idle. So I have more adjustments to do, but definitely progress.

dsraven · 08-17-2021, 10:10 PM

Yippee
Now you are coil rich, better buy some more trucks so you have something to use them on, haha

**mr48chev** · 08-17-2021, 10:45 PM

Cool enough, now on to bigger and better things.

1project2many · 08-18-2021, 01:19 PM

Glad to hear it fired up. You may need to open the throttle plates to get enough air into the cylinders when you get back to it.

08-17-2021, 04:14 PM	#26
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,334	Re: What am I missing with getting this 235 running well, then. in that case I would advance the sucker and give it a crank. you'll know if it's too far advanced, the starter will tell you. have fun with the cameo while waitin for parts. got pic of that thing?

08-17-2021, 08:12 PM	#27
daveshilling Registered User Join Date: Jan 2013 Location: roseville Posts: 823	Re: What am I missing with getting this 235 running I was poking around in my spare parts bin for something else, and what did I find? A brand new coil I was unaware of... threw in the new coil, turned it over while pumping the gas pedal, and the engine started up and stayed running at a high idle! The coil I was using ran another truck, but I guess it just wasn't enough for this particular setup. I suspected the spark, you all suspected the spark, and it was the spark. I don't have the radiator on so I only let it run briefly, but I consider that a success for now.. once it's reassembled, which should be sooner than later now, I can play around with the timing and idle. Thanks for your help gentlemen! __________________ My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo

08-17-2021, 08:47 PM	#28
daveshilling Registered User Join Date: Jan 2013 Location: roseville Posts: 823	Re: What am I missing with getting this 235 running Update: I found the source of the high idle, I left off the pcv/power brake vacuum fitting so I had a massive vacuum leak. I re-installed all of that, and then it wouldnt start again. I advanced the timing and it would run, but not idle. So I have more adjustments to do, but definitely progress. __________________ My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo

08-17-2021, 10:10 PM	#29
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,334	Re: What am I missing with getting this 235 running Yippee Now you are coil rich, better buy some more trucks so you have something to use them on, haha

08-17-2021, 10:45 PM	#30
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: What am I missing with getting this 235 running Cool enough, now on to bigger and better things. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-18-2021, 01:19 PM	#31
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: What am I missing with getting this 235 running Glad to hear it fired up. You may need to open the throttle plates to get enough air into the cylinders when you get back to it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.