400 Sb - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 02-08-2004, 12:27 PM

Never seen one for multiple carbs.

www.jegs.com has them for $149.99.

Quote:

From Jegs website P/N 350-7104 ...Manifold only
Designed for 262-400 c.i.d. Chevy V8s. Designed especially for spread-bore carburetors such as the Performer RPM Q-Jet #350-1910. For maximum power with broad torque curve for high-performance street/marine. #350-7104 is .700'' taller than #350-2101. Has provisions to add oil fill tube. No provisions for hot air style choke. Accepts divorced choke, late-model waterneck, air-conditioning, alternator and H.E.I. Will fit cast iron Bowtie heads. Not for 1987 and later cast iron heads. Will not fit under stock Vette hood. Carb pad will accept square-bore carbs without adapters.
Installation Notes: Recommended intake gasket is Fel-Pro #375-1256 (open heat passage) or #375-1205. For divorced choke use rod #350-9172

Can be found on
THIS page.

ucmydust68 · 02-08-2004, 12:34 PM

hey i have the exact carb and intake you were wanting, an edelbrock performer and a holley 600 with electric choke, they both have 1400miles on them 100$ takes them both!! let me know!
chris

Bowtie67 · 02-08-2004, 05:20 PM

Sounds like a good Deal..

Longhorn Man · 02-08-2004, 05:25 PM

That would be pretty hard to beat.

Bushy · 02-08-2004, 05:34 PM

thanks 68, but i think i'm gonna go with an all edelbrock setup.

Longhorn Man · 02-08-2004, 05:47 PM

What would the shipping cost to 43228 on that intake/carb combo?
I may well be interested.

02-08-2004, 12:34 PM	#27
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	hey i have the exact carb and intake you were wanting, an edelbrock performer and a holley 600 with electric choke, they both have 1400miles on them 100$ takes them both!! let me know! chris __________________ 72 w/67 front clip 415ci fuel injection t56 air ride 18/20's

02-08-2004, 05:34 PM	#30
Bushy Registered User Join Date: Dec 2003 Location: Tennessee Posts: 10	thanks 68, but i think i'm gonna go with an all edelbrock setup. __________________ 1970 CST20 4X4 2002 BMW M3 SMG II 1995 Harley Dyna Chopper

02-08-2004, 05:20 PM	#28
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Sounds like a good Deal..

02-08-2004, 05:25 PM	#29
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	That would be pretty hard to beat.

02-08-2004, 05:47 PM	#31
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	What would the shipping cost to 43228 on that intake/carb combo? I may well be interested.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.