08-15-2021, 11:36 AM | #5001 |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: What did you do with your truck today, Part 3
I got back to work on polishing the back case on my 6-71. Inside corners suck and that is pretty much all there is. My biggest challenge is once I get it ground down to good metal getting it flat again. My little HF mini 2" D/A sander works great for this because it gives me good control without gauging like the rotary tool does. So I made an extension for it to use a 1" pad. Then I turned down a 1" pad to a about 1/2" pad. This is a game changer. I have to keep the speed down which is fine. Also a bonus is I can make them out of worn out 1" pad and punch the paper out of worn out paper because the center is still fine. This will undoubtedly void the warranty on my $20 tool. Thank you for your time.
|
08-15-2021, 05:01 PM | #5002 | |
Registered User
Join Date: Feb 2010
Location: Lebanon, Ohio
Posts: 1,359
|
Re: What did you do with your truck today, Part 3
Quote:
__________________
Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to) |
|
08-15-2021, 10:21 PM | #5003 |
Registered User
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,482
|
Re: What did you do with your truck today, Part 3
So my wife has been wanting to purge our basement in prep for our up coming move. I dont normally haul crap in my '49 but it had to be done. so off to the dumps we went. My wife decided she wanted to go - its been over 10 years since she rode in the truck. And she enjoyed it !!! we stopped for burgers and shakes and made a great day out of a dump run.
__________________
49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!! |
08-16-2021, 12:29 AM | #5004 |
Senior Member
Join Date: Oct 2016
Location: Olympia, WA
Posts: 523
|
Re: What did you do with your truck today, Part 3
Matt Dare is just starting on working with photography and was at the Adna Car Show and made this up for me just because he was impressed with my truck!!!
|
08-16-2021, 03:44 AM | #5005 | |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: What did you do with your truck today, Part 3
Quote:
Looks magazine-quality - the truck and the photos!
__________________
1951 Chevy Panel Truck |
|
08-18-2021, 02:06 AM | #5006 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: What did you do with your truck today, Part 3
I dug out my Eastwood contour and started cleaning up my passenger door so I have a clean area for my vertical cut line.
It did such a good job ma nature decided I had done a rain dance and we are getting a light sprinkle of moisture in the area. That's the first step for extending my doors 9-1/4 inches.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
08-18-2021, 02:33 AM | #5007 |
Registered User
Join Date: Oct 2010
Location: Yakima Valley, Washington
Posts: 579
|
Re: What did you do with your truck today, Part 3
Double posted.. Rain must’ve gotten in my router..
__________________
1951 GMC 250 Open Express Pickup 1968 Suburban C10 1971 C20 Olive “People are shocked when they find out I’m not a good electrician” Dad told me “Son, never strike a man in anger- unless you’re certain you can get away with it” |
08-18-2021, 02:34 AM | #5008 |
Registered User
Join Date: Oct 2010
Location: Yakima Valley, Washington
Posts: 579
|
Re: What did you do with your truck today, Part 3
So you’re the one that had bare metal outside today. I wondered why it was raining here in the valley!
I’ve missed what you’ve plans are (if it’s all layed out here somewhere?) The doors are getting stretched- what else are doing to it? Greg
__________________
1951 GMC 250 Open Express Pickup 1968 Suburban C10 1971 C20 Olive “People are shocked when they find out I’m not a good electrician” Dad told me “Son, never strike a man in anger- unless you’re certain you can get away with it” |
08-18-2021, 07:57 AM | #5009 | |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: What did you do with your truck today, Part 3
Quote:
|
|
08-18-2021, 09:30 AM | #5010 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: What did you do with your truck today, Part 3
The plan is to stretch the doors 9-1/4 inches, chop the cab between 3 and 4 inches, Section the cab 3 inches and then run it on a GMC half ton long bed frame with it's stock short box.
My scissors shop image redo (can't do photoshop) of Cole Fosters old Salinas Boys truck as my concept image.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
08-18-2021, 03:14 PM | #5011 | |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: What did you do with your truck today, Part 3
Quote:
|
|
08-18-2021, 04:57 PM | #5012 |
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: What did you do with your truck today, Part 3
Got my "year of origin" plate approved and registered. Now I need to get it done. I looked 10 years to find a near mint 59 truck plate. Wires are for the LED lights.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
08-19-2021, 08:47 AM | #5013 |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: What did you do with your truck today, Part 3
Wow that's really nice! This is the best I could do after about 4 years searching. We only run 1 plate now. Indiana didn't make a plate in 53 due to metal shortage so the topper was the hardest thing to find. We are not allowed to restore them. We have a standard plate for the sticker that you have to carry with you but not display. Both numbers are on the registration. I'm still polishing my blower case.
|
08-20-2021, 05:56 PM | #5014 |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: What did you do with your truck today, Part 3
I had to put a new power steering rack on it. I got new tie rods as well. Lastly, I have LED headlight, front blinkers, and rear taillight/blinkers. I got tired of the slow and fast blinking. I got a flap wheel and cleaned off a couple of spots in the frame. I put two new ground straps on and now they seem to work as they should.
|
08-20-2021, 09:19 PM | #5015 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
|
Re: What did you do with your truck today, Part 3
sometimes the led lights need a different type of flasher unit because they draw such small current.
https://www.motortrend.com/news/ligh...-flasher-leds/ |
08-20-2021, 09:20 PM | #5016 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
|
Re: What did you do with your truck today, Part 3
sometimes the led lights need a different type of flasher unit because they draw such small current.
https://www.motortrend.com/news/ligh...-flasher-leds/ |
08-21-2021, 10:25 AM | #5017 |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: What did you do with your truck today, Part 3
Yeah, Dennis, I had to buy two of them. One for the blinkers and the other for the hazard lights, but even after installing, they were still doing the slow-normal/fast blinking.
|
08-21-2021, 10:49 AM | #5018 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
|
Re: What did you do with your truck today, Part 3
I think 1/2 of the wiring issues I have troubleshot or repaired over the years have been caused by a poor ground somewhere in the system. That or a bad connection due to a poor crimp on a terminal, wires imply stripped and twisted together, poor initial engineering/install or someones previous repair that didnt get any protection from the elements. Where I live, if the connection isnt inside the vehicle then it needs to be sealed/shrink tubed/coated with anticorrosion of some sort.even inside, why not protect it.
|
08-21-2021, 11:41 AM | #5019 | |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: What did you do with your truck today, Part 3
Quote:
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
|
08-21-2021, 05:24 PM | #5020 | |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: What did you do with your truck today, Part 3
Quote:
1. Cylinder head to frame 2. Cylinder head to transmission 3. Transmission to frame 4. Battery to frame 5. Body to frame x2 I think that ought to do it |
|
08-21-2021, 08:00 PM | #5021 |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: What did you do with your truck today, Part 3
Ditto on the grounds. Even a functional ground that is poor will cause a functional item to operate poorly.
|
08-21-2021, 08:03 PM | #5022 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
|
Re: What did you do with your truck today, Part 3
that will probably do it as long as the lights are grounded to the frame or a body part that is directly grounded. on some trucks, the front lights ground to the surrounding sheet metal which may or may not be directly grounded to the battery through a cable. sometimes the lights only worked because the light housing was screwed onto something that was bolted to another body part that was bolted to yet another body part that was actually grounded. it's always best to run the light ground directly to a bare metal spot on the frame, with a star washer, then use some anticorrosion on the connection when tightened up. on newer vehicles you will find a ground distribution wiring diagram where several accy have been wired to a common ground wire that has a dedicated grounding area on the vehicle. there are usually several f these in the system.
a good way to check for a poor ground, if the lights are dim or the heater fan seems slow, is to use a long test wire connected well to the battery ground, then turn on the light or accy in question and use the test wire as a ground for that accy. if you get proper operation then the problem is a bad round. a test light can also be used if it is grounded like normal and then when the tester is touching the ground of the accy, if it lights up dimly then there is a voltage difference there so that indicates a poor ground connection for that accy. sorry, that got long winded. |
08-22-2021, 10:06 AM | #5023 |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: What did you do with your truck today, Part 3
Always appreciate all your knowledge Dennis. Have a great day!!!!
|
09-05-2021, 03:41 PM | #5024 |
Registered User
Join Date: Aug 2020
Location: Grants Pass Or
Posts: 39
|
Re: What did you do with your truck today, Part 3
A good week! I changed out the front coil springs, they were old and sagging. I bought coils for a big block Camaro and gained about an inch and a half so now the tires don't rub. I also got glass installed and am now working on hanging doors. What a PITA! The usual story, rusty bolts and worn parts. It's all fun.
|
09-05-2021, 06:08 PM | #5025 |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,624
|
Re: What did you do with your truck today, Part 3
Thought about it .
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
Bookmarks |
|
|