Its Mine the World Famous 67 Dragtruck - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scatesracing · 10-12-2007, 04:09 PM

Quote:

Originally Posted by djracer

I tried my 29.5 x 10.5's today! I got similar results 60ft wise but I had severe tire shake!

Tire shake ??? When during your burn out ??? or in the 60 foot

djracer · 10-12-2007, 07:27 PM

During the 60ft!

I have a set of stiff sidewall micky's to try Sunday I hope!

The hoosier rep told me to delay the nitrous a bit! I have been spraying 250 out of the hole!

ssmith10pn · 10-21-2007, 02:15 PM

Kevin tell Santa Claus you need on of these.
http://drr.infopop.cc/eve/forums/a/t...2/m/8621005143

djracer · 10-21-2007, 07:40 PM

that would slow me down if I didn't have more cubes!

57sailplane · 10-30-2007, 10:28 AM

hey djracer.

i was wandering if you could tell me what rear spacing you have between the frame and your axel.

djracer · 10-30-2007, 11:43 AM

I'm not sure what you are asking?

57sailplane · 10-30-2007, 04:10 PM

i now its probably nothing but i am welding the brackets on for my rear coils and was wondering what is the ride height between the top of your rear axel and the bottom of your frame. the distance between the top of the axel and the frame. were the frame rides over the axel. i want to go the minimum i can here and was wandering what you are runing... thanks for all your help. andrew

Mayo · 03-23-2009, 10:52 AM

What size cowl hood do you have on there? It is an awesome truck btw.

djracer · 03-23-2009, 03:40 PM

Quote:

Originally Posted by Mayo

What size cowl hood do you have on there? It is an awesome truck btw.

I think its about 3 or so inches but I have never measured it. I can't wait to get it back running.

djracer · 10-30-2007, 05:07 PM

Mine is c notched You might be able to see it in this pic!

a small section of the top is left to say it has stock frame rails!

drbyrdman · 11-02-2007, 07:04 PM

Wondering if these would fit my truck???
NEW MICKEY THOMPSON TIRES 33/21.5/R15 & 26/8.5/15 - $1500

Brand new never used Mickey Thompson Drag Racing tires and Centerline Wheels. For tubbed out Hot Rod.
Front Tires: 26/8.5/15, Rear Tires: 33/21.5/R15. 5" Lug Pattern

Sold car never got the chance to use them. Paid $2100.00

PA-IndianRider · 05-13-2008, 04:24 PM

Quote:

Originally Posted by djracer

Mine is c notched You might be able to see it .....!

DJ.... also can see how your rear is setup using a "modified" trailing arm type setup.

VERY NICE ..... and from what I have seen of your C10's runs down the 1/4 mile VERY EFFECTIVE.

If you have any more detailed pics I would appreciate seeing them.

I am just starting my plans/project to do a PRO STREET '70 C10 swb Stepside..... any & all suggestions appreciated.

Thanks, John

djracer · 11-04-2007, 10:16 PM

you would have lug pattern isuues for sure and would probably have to have the rearend narrowed and the bed tubbed

drbyrdman · 11-05-2007, 09:46 AM

I fitted them last nite. To wide. My truck is tubbed and has a narrowed 9" under it. 21.5 stick out around 2" to much. Dam it did look good.

djracer · 11-05-2007, 10:02 AM

you may want to dis mount a tire ans see if the wheel fits under the bed you can get a smaller tire! the hoosiers look real good!

Evans · 12-31-2007, 08:00 PM

Kevin , anything new with the truck ???

djracer · 01-03-2008, 06:22 PM

I have been real busy and haven't touched it in a couple monthes but I will before too long.

Couch · 01-30-2008, 03:52 PM

ok. wow. my eyes hurt. i just spent like 2 hours reading this hole topic. great build. love the truck. i have a couple questions for dj racer. do you still have the crank trigger for sell and what kinda tire did you ever decide to stick with? that thing looks wicked tuckin the slicks the way it does

djracer · 01-30-2008, 09:49 PM

Sorry for the long thread! I don't have the crank trigger anymore.

As for tires I want to eventually have two sets of rear wheels. One with 33 x 10.5w and one with 29.5 x 10.5. The main reason for running these sizes is I can buy take off's with 4 to 10 runs for around a hundred dollars a set! I actually want to try some dot tires also. We have some classes in this area that limit you on a slick but will let you run a larger dot tire! I like the Hoosiers a little better than the Micky Thompsons in a slick.

Couch · 01-31-2008, 12:30 AM

werd hoosiers all the way. thats what im running right now.28 x 10s wi8th 4.10's, but im also a sbc. it'll be the first time at the track this weekend if it doesnt rain. i wish we had available takeoffs around here.

djracer · 01-31-2008, 12:54 AM

Good luck at the track. Take offs are cheap but you are a little limited in size choices!

JayG · 02-01-2008, 03:33 AM

Great build thread guys! Started reading it last night, but ran out of time. Finished it at work during lunch today. I greatly admire all you racers for your dedication to your racing. dj and Bigjim as well as the others, AWESOME trucks!!

71Dragtruck · 02-01-2008, 11:54 AM

Here's another good thread we had going before they gave us our own section. And not just saying that because I started it.

http://67-72chevytrucks.com/vboard/s...d.php?t=203647

djracer · 03-09-2008, 08:46 AM

We got the truck back in the shop! A few updates start tomorrow!

**regan wilson** · 03-15-2008, 07:08 PM

Nice truck DJ .......So how fast has it gone ? I thought I saw in the thread it has run faster than what you have in your sig .

10-12-2007, 07:27 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck During the 60ft! I have a set of stiff sidewall micky's to try Sunday I hope! The hoosier rep told me to delay the nitrous a bit! I have been spraying 250 out of the hole! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-21-2007, 02:15 PM	#3
ssmith10pn Registered User Join Date: Dec 2006 Location: Montgomery, Alabama Posts: 7	Re: Its Mine the World Famous 67 Dragtruck Kevin tell Santa Claus you need on of these. http://drr.infopop.cc/eve/forums/a/t...2/m/8621005143

10-21-2007, 07:40 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck that would slow me down if I didn't have more cubes! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-30-2007, 10:28 AM	#5
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Its Mine the World Famous 67 Dragtruck hey djracer. i was wandering if you could tell me what rear spacing you have between the frame and your axel.

10-30-2007, 11:43 AM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck I'm not sure what you are asking? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-30-2007, 04:10 PM	#7
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Its Mine the World Famous 67 Dragtruck i now its probably nothing but i am welding the brackets on for my rear coils and was wondering what is the ride height between the top of your rear axel and the bottom of your frame. the distance between the top of the axel and the frame. were the frame rides over the axel. i want to go the minimum i can here and was wandering what you are runing... thanks for all your help. andrew

03-23-2009, 10:52 AM	#8
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Its Mine the World Famous 67 Dragtruck What size cowl hood do you have on there? It is an awesome truck btw. __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

10-30-2007, 05:07 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck Mine is c notched You might be able to see it in this pic! a small section of the top is left to say it has stock frame rails! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-02-2007, 07:04 PM	#11
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Its Mine the World Famous 67 Dragtruck Wondering if these would fit my truck??? NEW MICKEY THOMPSON TIRES 33/21.5/R15 & 26/8.5/15 - $1500 Brand new never used Mickey Thompson Drag Racing tires and Centerline Wheels. For tubbed out Hot Rod. Front Tires: 26/8.5/15, Rear Tires: 33/21.5/R15. 5" Lug Pattern Sold car never got the chance to use them. Paid $2100.00 Attached Images

11-04-2007, 10:16 PM	#13
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck you would have lug pattern isuues for sure and would probably have to have the rearend narrowed and the bed tubbed __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-05-2007, 09:46 AM	#14
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Its Mine the World Famous 67 Dragtruck I fitted them last nite. To wide. My truck is tubbed and has a narrowed 9" under it. 21.5 stick out around 2" to much. Dam it did look good.

11-05-2007, 10:02 AM	#15
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck you may want to dis mount a tire ans see if the wheel fits under the bed you can get a smaller tire! the hoosiers look real good! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-31-2007, 08:00 PM	#16
Evans Registered User Join Date: Feb 2007 Location: Dallastown , Pa Posts: 261	Re: Its Mine the World Famous 67 Dragtruck Kevin , anything new with the truck ???

01-03-2008, 06:22 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck I have been real busy and haven't touched it in a couple monthes but I will before too long. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-30-2008, 03:52 PM	#18
Couch Daily Driver Join Date: Jul 2007 Location: fresno,ca Posts: 228	Re: Its Mine the World Famous 67 Dragtruck ok. wow. my eyes hurt. i just spent like 2 hours reading this hole topic. great build. love the truck. i have a couple questions for dj racer. do you still have the crank trigger for sell and what kinda tire did you ever decide to stick with? that thing looks wicked tuckin the slicks the way it does __________________ nitrous...the equal opportunity destroyer.



Register or Log In To remove these advertisements.

01-30-2008, 09:49 PM	#19
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck Sorry for the long thread! I don't have the crank trigger anymore. As for tires I want to eventually have two sets of rear wheels. One with 33 x 10.5w and one with 29.5 x 10.5. The main reason for running these sizes is I can buy take off's with 4 to 10 runs for around a hundred dollars a set! I actually want to try some dot tires also. We have some classes in this area that limit you on a slick but will let you run a larger dot tire! I like the Hoosiers a little better than the Micky Thompsons in a slick. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-31-2008, 12:30 AM	#20
Couch Daily Driver Join Date: Jul 2007 Location: fresno,ca Posts: 228	Re: Its Mine the World Famous 67 Dragtruck werd hoosiers all the way. thats what im running right now.28 x 10s wi8th 4.10's, but im also a sbc. it'll be the first time at the track this weekend if it doesnt rain. i wish we had available takeoffs around here. __________________ nitrous...the equal opportunity destroyer.

01-31-2008, 12:54 AM	#21
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck Good luck at the track. Take offs are cheap but you are a little limited in size choices! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-01-2008, 03:33 AM	#22
JayG Formerly ADHDCARGUY Join Date: Mar 2005 Location: DUNCANVILLE, TX Posts: 1,213	Re: Its Mine the World Famous 67 Dragtruck Great build thread guys! Started reading it last night, but ran out of time. Finished it at work during lunch today. I greatly admire all you racers for your dedication to your racing. dj and Bigjim as well as the others, AWESOME trucks!! __________________ Jay 67CHEVY SWB,355, built 700r, 5/7,9",posi 3.50,REAR BAGS,HOOSIERS, A/C. 54CHEVY - BURB, beginning construction(well, i gotta take it apart first!) 36FORD PU - WAITING 38CHEVY - 2DR SD,CHASSIS FINISHED 46CHEVY - BURB - waiting

02-01-2008, 11:54 AM	#23
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Its Mine the World Famous 67 Dragtruck Here's another good thread we had going before they gave us our own section. And not just saying that because I started it. http://67-72chevytrucks.com/vboard/s...d.php?t=203647 __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

03-09-2008, 08:46 AM	#24
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: Its Mine the World Famous 67 Dragtruck We got the truck back in the shop! A few updates start tomorrow! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-15-2008, 07:08 PM	#25
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,553	Re: Its Mine the World Famous 67 Dragtruck Nice truck DJ .......So how fast has it gone ? I thought I saw in the thread it has run faster than what you have in your sig . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph I was Dragtruck when Dragtruck wasn't Cool!

Register or Log In To remove these advertisements.