What did you do to your truck today! - Page 211 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fatgump · 01-05-2013, 10:01 PM

Installed some new headers

Trsmotrhed · 01-06-2013, 08:55 PM

Quote:

Originally Posted by fatgump

Installed some new headers

What headers are those? look nice.

Trsmotrhed · 01-06-2013, 08:59 PM

Installed my LMC rear mount tank today. I had to recess the top 1 1/4" for the Tanks Inc PA pump fittings to clear the bed. I'll install the pump tomorrow and should be ready to fire up my LT1.

VDOG · 01-09-2013, 12:41 PM

Quote:

Originally Posted by Jimbabwe

I drove my truck for the first time in nine months today. All that was left on the agenda for Saturday was the drive shaft and an alignment. Even with the Porterbuilt stuff it drives like a big clunky pile of old truck. My bizarre expectations of carving corners like a sports car were grossly overrated! Gotta just get used to it of course.

Ok thats not cool because that Porterbuilt stuff is expensive. I had thought about them, and also looked at No Limit and RideTech for my shortbed step.
I also want that handle like its on rails ride. Is there something you can do or add to get it to ride better?

1972SUPERSB · 01-09-2013, 12:58 PM

Painted my door panels and installed carpet on doors

yuccales · 01-09-2013, 01:43 PM

Quote:

Originally Posted by 1972SUPERSB

Painted my door panels and installed carpet on doors

Those panels look great!

1972SUPERSB · 01-09-2013, 01:49 PM

Quote:

Originally Posted by yuccales

Those panels look great!

Thanks, I used colorbond paint 68 bright blue. Stuff works really good.
Posted via Mobile Device

shawno72 · 01-06-2013, 06:50 PM

With copo caps.

Posted via Mobile Device

Gor77 · 01-09-2013, 11:45 AM

took off cabin. took off the engine.

brian.kannady · 01-13-2013, 12:24 AM

Put rebuilt carb on, pulled the seat and gas tank and dumped the 5+ year old gas out. The gas looked and smelled more like diesel than gasoline. Hope to get it back together and try to start it next weekend.

big_al_71 · 01-13-2013, 10:29 AM

drove it....

88fordf150 · 01-13-2013, 10:55 AM

Quote:

Originally Posted by big_al_71

drove it....

Sweet Truck!

heathbirkendahl · 01-13-2013, 04:53 PM

Quote:

Originally Posted by big_al_71

drove it....

Can you post some pics of your interior?

I'm ordering that tonneau cover this week. Very Clean!
Posted via Mobile Device

heathbirkendahl · 01-13-2013, 05:02 PM

Quote:

Originally Posted by big_al_71

drove it....

Can you post some pics of your interior?

I'm ordering that tonneau cover this week. Very Clean!
Posted via Mobile Device
Posted via Mobile Device

cantcode86 · 01-14-2013, 08:48 AM

Quote:

Originally Posted by big_al_71

drove it....

Beautiful truck!!

CMH77 · 01-13-2013, 05:15 PM

Yesterday took advantage of the unseasonable weather to paint my new steelies glossy white and install the new (and newly painted) script valve cover.

Today, put fresh fluids in the new I6 and working on hooking up the carb linkages and fuel supply from pump to carburetor. After that I have to hang the new exhaust and the drivetrain work is done. I think.

On to body and bed floor after that.

shawno72 · 01-13-2013, 06:23 PM

Quote:

Originally Posted by CMH77

Yesterday took advantage of the unseasonable weather to paint my new steelies glossy white and install the new (and newly painted) script valve cover.

Today, put fresh fluids in the new I6 and working on hooking up the carb linkages and fuel supply from pump to carburetor. After that I have to hang the new exhaust and the drivetrain work is done. I think.

On to body and bed floor after that.

Got any pics?

mud.man.rj · 01-13-2013, 09:09 PM

sounds cool, but I can't see it. share.

aventur1 · 01-13-2013, 09:38 PM

Got my used 67 front clip on over last few days and got a great deal on some 33" tires.

mud.man.rj · 01-13-2013, 09:41 PM

Sits nice doesn't it.

aventur1 · 01-13-2013, 09:45 PM

Mine?
Ya and the ride is smooth and solid, well pretty smooth actually...for a two inch lift.

mud.man.rj · 01-13-2013, 09:51 PM

Only a 2" lift, it actually looks like more.

derrickmanx1 · 01-13-2013, 09:54 PM

Does dreaming about it count???

derick1 · 01-13-2013, 11:48 PM

1. I took out some trashed 6x9 that where cut into the door panels (going to be replaced anyways) painted them black just because and added a 1 off custom high speed cup holder.

Name: DSC_0008.jpg
Views: 505
Size: 37.6 KB

Name: DSC_0008.jpg
Views: 505
Size: 37.6 KB

2. Slaped a MDF wooden box toget her to add radio so I wouldnt have to cut my dash (temp fix), found the shift knob at Walmart thought it was kinda cool and better looking than the broken $x$ knob that I had.

Name: DSC_0010.JPG
Views: 503
Size: 74.7 KB

Name: DSC_0010.JPG
Views: 503
Size: 74.7 KB

69GWC · 01-13-2013, 11:55 PM

Got a knob from autozone kinda like that for my TC shifter.

Posted via Mobile Device

01-05-2013, 10:01 PM	#1
fatgump Registered User Join Date: Apr 2011 Location: Arizona Posts: 249	Re: What did you do to your truck today! Installed some new headers Attached Images

01-06-2013, 08:59 PM	#3
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: What did you do to your truck today! Installed my LMC rear mount tank today. I had to recess the top 1 1/4" for the Tanks Inc PA pump fittings to clear the bed. I'll install the pump tomorrow and should be ready to fire up my LT1. Attached Images __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

01-09-2013, 12:58 PM	#5
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: What did you do to your truck today! Painted my door panels and installed carpet on doors Attached Images __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

01-06-2013, 06:50 PM	#8
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: What did you do to your truck today! With copo caps. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-09-2013, 11:45 AM	#9
Gor77 Registered User Join Date: Sep 2012 Location: Moscow, Russia Posts: 347	Re: What did you do to your truck today! took off cabin. took off the engine. __________________ ___________________________________ Dima 1970 Chevrolet C10 stepside http://67-72chevytrucks.com/vboard/s...d.php?t=569197

01-13-2013, 12:24 AM	#10
brian.kannady Registered User Join Date: Dec 2012 Location: Jenks, OK Posts: 18	Re: What did you do to your truck today! Put rebuilt carb on, pulled the seat and gas tank and dumped the 5+ year old gas out. The gas looked and smelled more like diesel than gasoline. Hope to get it back together and try to start it next weekend.

01-13-2013, 10:29 AM	#11
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: What did you do to your truck today! drove it.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

01-13-2013, 05:15 PM	#16
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: What did you do to your truck today! Yesterday took advantage of the unseasonable weather to paint my new steelies glossy white and install the new (and newly painted) script valve cover. Today, put fresh fluids in the new I6 and working on hooking up the carb linkages and fuel supply from pump to carburetor. After that I have to hang the new exhaust and the drivetrain work is done. I think. On to body and bed floor after that.

01-13-2013, 09:09 PM	#18
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! sounds cool, but I can't see it. share.

01-13-2013, 09:38 PM	#19
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: What did you do to your truck today! Got my used 67 front clip on over last few days and got a great deal on some 33" tires. Attached Images __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

01-13-2013, 09:41 PM	#20
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Sits nice doesn't it.

01-13-2013, 09:45 PM	#21
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: What did you do to your truck today! Mine? Ya and the ride is smooth and solid, well pretty smooth actually...for a two inch lift. __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

01-13-2013, 09:51 PM	#22
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Only a 2" lift, it actually looks like more.

01-13-2013, 09:54 PM	#23
derrickmanx1 Registered User Join Date: Nov 2012 Location: Rising Star, Tx Posts: 249	Re: What did you do to your truck today! Does dreaming about it count??? __________________ NAME: TRAVIS TRUCK: BRUISER 71 C/10 SWB 3.5/5" drop 4.11 GEARS. F.A.S.T. BBC 408 496hp/479ft/lb JAKES 4L80E TCI TCU PTC 10.5" 2800 STALL My build thread: http://67-72chevytrucks.com/vboard/s...30#post5779530

01-13-2013, 11:48 PM	#24
derick1 Registered User Join Date: Aug 2012 Location: St. Robert, MO Posts: 32	Re: What did you do to your truck today! 1. I took out some trashed 6x9 that where cut into the door panels (going to be replaced anyways) painted them black just because and added a 1 off custom high speed cup holder. 2. Slaped a MDF wooden box toget her to add radio so I wouldnt have to cut my dash (temp fix), found the shift knob at Walmart thought it was kinda cool and better looking than the broken $x$ knob that I had.



Register or Log In To remove these advertisements.

01-13-2013, 11:55 PM	#25
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: What did you do to your truck today! Got a knob from autozone kinda like that for my TC shifter. Posted via Mobile Device Attached Images

Register or Log In To remove these advertisements.