late build thread...LOL

[justpball]

eBay brother
http://www.ebay.com/itm/310765566844

[justpball]

The headlight bezels I bought with the black on them... Aircraft stripper takes the black off and doesn't hurt the plastic...

[revitout]

awsom cheers for that.

[justpball]

Your welcome buddy!

[TattooTony13]

Originally Posted by justpball

I will let ya know the next time he is in town Juan.
Here are a few pics from this weekend





Posted via Mobile Device

Hey bro 1st off you have one amazing Burb!! Wanted to ask you a question and hoping youll be willing to help me. You posted the BS on the 20×8 Coy which was 5.5, I was wondering what is the BS on the KMC 22x11. Reason I'm asking I have an 82 C10 Blazer 2WD that i would like to have the same fender clearance, because once the wheels are ordered and cut there is a small room for era. And yes Im aware of a slight fender mod needs to be done along with lower control arm, I just want to tuck the wheels comfortably... Your help would be greatly appreciated,

[watahyahknow]

if hes looking for new things to do on his truck :
he might smooth out the lip on those fairings so when people taking pictures of the wheels it looks prettier

[bbbc10]

jus google the American racing nova 22x11 an it will tell u the bs on the wheel bro

[bbbc10]

he has done some new things to his truck he jus hasn't posted them here! an there is nothing wrong with "fairings" lol they look alright to me

[watahyahknow]

they look ok
wat i meant was : there some dents in the edges from the facory spotwelds to the innerfenders , if he smoothed those out they be looking better
its riddler award stuff but then again it wouldnt take too mush ....................... just a respray..............hmmm maibe not such a good idea

[justpball]

I added one piece windows....
The novas have a 18mm offsets...

[justpball]

Which equals out to a 6&5/8 BS so since these are 11 in instead of 10s it equals out to be the same

[justpball]

Originally Posted by watahyahknow

they look ok
wat i meant was : there some dents in the edges from the facory spotwelds to the innerfenders , if he smoothed those out they be looking better
its riddler award stuff but then again it wouldnt take too mush ....................... just a respray..............hmmm maibe not such a good idea

Yea it is getting time to redo the truck paint wise and I will be working on those and all the other spots...

[TattooTony13]

Originally Posted by justpball

Which equals out to a 6&5/8 BS so since these are 11 in instead of 10s it equals out to be the same

Man HUGE THANKS on the BS, looks killer with the One Piece Product...

[justpball]

Thanks brother!

[justpball]

I am even running a 1&1/2 in spacer on the back to push the wheels out to the fender edge

[Mr_Shamrock]

Just read this whole thread - HOLY inspiration. I bought a 90 Burb a while back and started on it, put it up for sale, nobody bit so I am continuing on with it. I am staying static on the drop (maybe some helper bags) and was wondering on the notch you did initially. I have a notch coming, but was wondering about the body mount that is right there. Did you do away with it? Thanks a million for taking the time to document this. Here is how mine sits now...



It is 3" spindles 2" springs and flip kit with lift shackles. It will just touch in the rear on a big dip so it needs a notch. Thanks!

[justpball]

^^^ looks great!! I moved the body mount.... Cut the rivets then welded it back where I wanted it...

[Mr_Shamrock]

Originally Posted by justpball

^^^ looks great!! I moved the body mount.... Cut the rivets then welded it back where I wanted it...

OK, that is what I figured. I am hoping I can remove it, install the notch, and then bolt the mount through the notch and frame. I'm not sure how that will all line up though. It's funny how seeing someone else's hard work can motivate!!! Thanks!

[justpball]

Glad I help.... Hahah

[watahyahknow]

think you could mount it to the side of the notch against the flat part of the frame
its only there to prevent clunking sounds when the axle is hitting the frame

dont know how big of a notch youre planning to make but a simple c notch can be made from a piece of waterpipe cut in half
if you dont want to lay awake at night worrying about the strength of the back half you could add a plate on the open side of the u of the chessis boxing it in
(make sure that you can still get at the brakelines dont burn trough the electric wiring and that sortah stuff )
not realy a need to pay through the nose for that if you have a welder and a grinder and acces to a scrap metal yard

[Mr_Shamrock]

Originally Posted by watahyahknow

think you could mount it to the side of the notch against the flat part of the frame
its only there to prevent clunking sounds when the axle is hitting the frame

dont know how big of a notch youre planning to make but a simple c notch can be made from a piece of waterpipe cut in half
if you dont want to lay awake at night worrying about the strength of the back half you could add a plate on the open side of the u of the chessis boxing it in
(make sure that you can still get at the brakelines dont burn trough the electric wiring and that sortah stuff )
not realy a need to pay through the nose for that if you have a welder and a grinder and acces to a scrap metal yard

The frame is straight back there so I think just about any straight notch is going to work. I found one from an 88-98 that a guy bought new and never installed for around half of what they cost new. I will know this weekend if it will work, but it looks like it will. I don't want to hijack this thread (any more than I already have) so the results will be posted in the 'Burban Build thread. Thanks for the information!

[justpball]

Yea that's what I used was one from a later style....

[bradleywayne08]

Good looking suburban really liking the headlights think I'm gona do it my self

[justpball]

Thanks buddy! Here is the latest pic... I picked up some Intro Billets a couple weeks ago

[justpball]