my 80 build - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

3r!c84 · 11-30-2010, 02:20 PM

Looking good
Posted via Mobile Device

v502 · 11-30-2010, 04:59 PM

Keep up good work Aaron. Its going very nicely.

flamingbig10 · 11-30-2010, 11:30 PM

thanks guys, I plan on having the motor buttoned up by next week and maybe I can get a core trans mission so I can mock every thing up and order some headers

JohnC · 12-01-2010, 10:08 AM

Making good progress....Keep plugging away at it.

flamingbig10 · 12-03-2010, 11:37 PM

thanks john
got a little done today, but still need to torque the bolts, I planed on getting a junk 4l80e so I can mock up the motor But the trans shop my work does business said the 4l80s are stout and they haven't worked on many

flamingbig10 · 12-07-2010, 09:34 AM

well I got the camshaft retainer plate and sprocket torqued down, but I decided I'm going to get a new pump, and maybe I'll get it today and button up the bottom of the motor, timing cover, and possible valley cover, every part wheel get a new seal or o ring

flamingbig10 · 12-07-2010, 11:41 PM

I got the oil pump, wind-age tray, pick up tube, oil pan, timing cover, and valley cover installed and torqued down

flamingbig10 · 12-09-2010, 12:29 AM

I'm thinking about getting some dirty dingo motor mounts

flamingbig10 · 12-10-2010, 09:39 AM

this should be on there way
http://cgi.ebay.com/ebaymotors/ws/eB...m=180598301252

JohnC · 12-10-2010, 09:51 AM

Looks good man!

Puglia10 · 12-10-2010, 01:10 PM

can you run the factory LS ac with those?

*nbpro* · 12-10-2010, 01:28 PM

Looks sweet Aaron

flamingbig10 · 12-10-2010, 09:59 PM

Quote:

Originally Posted by Puglia10

can you run the factory LS ac with those?

I'm not for sure but I won't be running a/c, the heat doesn't bother me just the cold does

thanks nbpro and John

flamingbig10 · 12-15-2010, 01:01 AM

got my dirty dingo mounts today they look great there even powder coated and might be getting a trans tomorrow from lkq

*nbpro* · 12-15-2010, 02:59 AM

sweet man

JohnC · 12-15-2010, 10:25 AM

Nice!

flamingbig10 · 12-15-2010, 10:39 PM

thanks guys called Larry at lkq and got the trans coming 4l80e with 107,000 and torque converter with 6 month warranty for 950

flamingbig10 · 12-16-2010, 09:53 PM

got the motor off the stand and bolted up the fly wheel

harnalien · 12-17-2010, 03:03 AM

Did you get your motor through LKQ? Do they work with you on pricing or is it firm? That's where I'm thinking of getting mine from.

flamingbig10 · 12-18-2010, 08:55 PM

Quote:

Originally Posted by harnalien

Did you get your motor through LKQ? Do they work with you on pricing or is it firm? That's where I'm thinking of getting mine from.

I got it from bow auto in New Hampshire

well I got my transmission but the pan is full of metal so I'll send it back Monday and see what happens and also I have another problem my fly wheel has a 3 bolt pattern and the torque converter is a 6 bolt

Jonboy · 12-18-2010, 09:59 PM

950 sounds a little high for the 4l80E. If they don't come through, call Robert at RCS in Tyler. 1.800.259.4020. They deliver here daily.

flamingbig10 · 12-18-2010, 10:36 PM

I couldn't wait

flamingbig10 · 12-18-2010, 10:39 PM

Quote:

Originally Posted by Jonboy

950 sounds a little high for the 4l80E. If they don't come through, call Robert at RCS in Tyler. 1.800.259.4020. They deliver here daily.

it ended up be over 1200 with the core and taxes so, if I have any trouble sending trans back and getting one that doesn't have a pan full of metal I'll send it back and give them a call

flamingbig10 · 12-19-2010, 02:19 AM

well it looks like I need to get a fly wheel and spacer from a 6.0 that came with 4l80, then I need to get a arp crank pulley bolt and torque converter bolts, when I get another trans I'll check the pan if good then a new filter which I do have, degrease the trans and bolt it to up to the motor, mock up to the trans cross member and install the valve springs and bolt up the accessories

flamingbig10 · 12-20-2010, 12:48 AM

I yanked out the passenger side floor pan cover panel, and I going to replace it with a weld in floor pan, I ordered both sides from capt and also ordered a arp crank pulley bolt and torque converter bolts

11-30-2010, 02:20 PM	#551
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: my 80 build Looking good Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

11-30-2010, 04:59 PM	#552
v502 Registered User Join Date: Oct 2009 Location: Portland, OR Posts: 198	Re: my 80 build Keep up good work Aaron. Its going very nicely. __________________ C10 Stepside Swap with 6.2 L92 & 6SP Auto 6L90 "Brain Check" Project

11-30-2010, 11:30 PM	#553
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks guys, I plan on having the motor buttoned up by next week and maybe I can get a core trans mission so I can mock every thing up and order some headers __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-01-2010, 10:08 AM	#554
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 80 build Making good progress....Keep plugging away at it.

12-03-2010, 11:37 PM	#555
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks john got a little done today, but still need to torque the bolts, I planed on getting a junk 4l80e so I can mock up the motor But the trans shop my work does business said the 4l80s are stout and they haven't worked on many __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 12-03-2010 at 11:44 PM.

12-07-2010, 09:34 AM	#556
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build well I got the camshaft retainer plate and sprocket torqued down, but I decided I'm going to get a new pump, and maybe I'll get it today and button up the bottom of the motor, timing cover, and possible valley cover, every part wheel get a new seal or o ring __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-07-2010, 11:41 PM	#557
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I got the oil pump, wind-age tray, pick up tube, oil pan, timing cover, and valley cover installed and torqued down __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-09-2010, 12:29 AM	#558
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I'm thinking about getting some dirty dingo motor mounts __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-10-2010, 09:39 AM	#559
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build this should be on there way http://cgi.ebay.com/ebaymotors/ws/eB...m=180598301252 __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-10-2010, 09:51 AM	#560
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 80 build Looks good man!

12-10-2010, 01:10 PM	#561
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 389	Re: my 80 build can you run the factory LS ac with those? __________________ 1979 c30 3+3 dually 1946 GMC

12-10-2010, 01:28 PM	#562
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: my 80 build Looks sweet Aaron

12-15-2010, 01:01 AM	#564
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build got my dirty dingo mounts today they look great there even powder coated and might be getting a trans tomorrow from lkq __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 12-15-2010 at 01:05 AM.

12-15-2010, 02:59 AM	#565
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: my 80 build sweet man

12-15-2010, 10:25 AM	#566
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 80 build Nice!



Register or Log In To remove these advertisements.

12-15-2010, 10:39 PM	#567
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks guys called Larry at lkq and got the trans coming 4l80e with 107,000 and torque converter with 6 month warranty for 950 __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-16-2010, 09:53 PM	#568
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build got the motor off the stand and bolted up the fly wheel __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-17-2010, 03:03 AM	#569
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: my 80 build Did you get your motor through LKQ? Do they work with you on pricing or is it firm? That's where I'm thinking of getting mine from.

12-18-2010, 09:59 PM	#571
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: my 80 build 950 sounds a little high for the 4l80E. If they don't come through, call Robert at RCS in Tyler. 1.800.259.4020. They deliver here daily. __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 12-18-2010 at 10:00 PM.

12-18-2010, 10:36 PM	#572
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I couldn't wait __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-19-2010, 02:19 AM	#574
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build well it looks like I need to get a fly wheel and spacer from a 6.0 that came with 4l80, then I need to get a arp crank pulley bolt and torque converter bolts, when I get another trans I'll check the pan if good then a new filter which I do have, degrease the trans and bolt it to up to the motor, mock up to the trans cross member and install the valve springs and bolt up the accessories __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-20-2010, 12:48 AM	#575
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I yanked out the passenger side floor pan cover panel, and I going to replace it with a weld in floor pan, I ordered both sides from capt and also ordered a arp crank pulley bolt and torque converter bolts __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 12-20-2010 at 12:48 AM.

Register or Log In To remove these advertisements.