Daverods project 66 - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 08-09-2009, 08:19 PM

Blacks beach.

Don't look to close it will burn.

Strodder · 08-09-2009, 09:07 PM

Quote:

Originally Posted by daverod

Blacks beach.

Don't look to close it will burn.

Too late, burned my eyes.

Dave your old lady rocks. She hepls you with sheetrock.

daverod · 08-09-2009, 09:18 PM

Quote:

Originally Posted by Strodder

Too late, burned my eyes.

Dave your old lady rocks. She hepls you with sheetrock.

Ya she rocks.

*****es but ya she rocks. Helps me flip my frame when I need it flipped to. *****es then too.

I'm going to be in trouble.

ruffrida2005 · 08-09-2009, 10:26 PM

Well atleast you can get yours to help you do stuff, mine *****es about everything I do. If I step foot in the garage other then to get stuff out the deep frezer she's at it.

daverod · 08-09-2009, 11:33 PM

Quote:

Originally Posted by ruffrida2005

Well atleast you can get yours to help you do stuff, mine *****es about everything I do. If I step foot in the garage other then to get stuff out the deep frezer she's at it.

your deep freeze is in your garage to huh.

daverod · 08-09-2009, 11:53 PM

Started to put my heads on. Got one side done. Put the other side on and started to freak because it did'nt look right. It was only covering half a hole. Turned out it was just some kind plug thing.

Did kind screw up and put the wrong bolts ( I think) in on the bottom ( the short ones). They did'nt have a circle on top? I found the right ones later. I just took the wrong ones out and replaced themn with the circle ones retightened everything a couple times. Hope it will be ok.

daverod · 08-10-2009, 12:20 AM

Oh I'm getting excited.

daverod · 08-10-2009, 12:32 AM

Well atleast you can get yours to help you do stuff, mine *****es about everything I do. If I step foot in the garage other then to get stuff out the deep frezer she's at it.

jgh64pkup · 08-10-2009, 10:36 AM

what heads are those

Strodder · 08-10-2009, 11:43 AM

Quote:

Originally Posted by jgh64pkup

what heads are those

Right on Gage keep them on track. We get enough *****ing at home. We don't need to hear about it here. Wait until you get married, then you can relate.

jgh64pkup · 08-10-2009, 11:45 AM

thats all i hear from my parents
i think my dad is the one that acts more like a woman

Strodder · 08-10-2009, 11:48 AM

Quote:

Originally Posted by jgh64pkup

thats all i hear from my parents
i think my dad is the one that acts more like a woman

So your never getting married?

daverod · 08-10-2009, 02:59 PM

Quote:

Originally Posted by jgh64pkup

what heads are those

? stock nothing fancy. My old ones were cracked. The guy at the machine shop had these. The price was right. I did'nt ask to many ?

jgh64pkup · 08-10-2009, 04:15 PM

what are the last three numbers in the casting number

jgh64pkup · 08-10-2009, 04:18 PM

Quote:

Originally Posted by Strodder

So your never getting married?

i guess someday

shrunken66stroker · 08-10-2009, 04:46 PM

Quote:

Originally Posted by jgh64pkup

i guess someday

Do yourself a favor and get your truck done first. My wife sees me heading for the garage and can suddenly think of ten things for me to do.

daverod · 08-10-2009, 04:47 PM

Quote:

Originally Posted by jgh64pkup

what are the last three numbers in the casting number

10822chm6

daverod · 08-10-2009, 04:51 PM

Quote:

Originally Posted by jgh64pkup

i guess someday

And if you do live with her for ten years first just to be sure she the one. Thats what I did.

Been together 25 years. Hell that record now adays.

daverod · 08-10-2009, 04:53 PM

Quote:

Originally Posted by shrunken66stroker

Do yourself a favor and get your truck done first. My wife sees me heading for the garage and can suddenly think of ten things for me to do.

She does'nt see me I just stay in there. Oh and the basement I spent a lot time there too. Playing guitar hero.

jgh64pkup · 08-10-2009, 04:58 PM

Quote:

Originally Posted by daverod

1-052?

holy $hit those are world s/r torquer heads
2.02 1.60 valves 200cc runners
how much did you pay for them
can you post some more casting numbers

daverod · 08-10-2009, 05:02 PM

Quote:

Originally Posted by jgh64pkup

holy $hit those are world s/r torquer heads
2.02 1.60 valves 200cc runners
can you post some more casting numbers

Is that good. Am I going to be able to do macho burn outs

Are you sure. I think the guy said they were aftermarket heads.

daverod · 08-10-2009, 05:07 PM

Quote:

Originally Posted by jgh64pkup

holy $hit those are world s/r torquer heads
2.02 1.60 valves 200cc runners
how much did you pay for them
can you post some more casting numbers

10822chm6

ya, thats right torquer. I like it.

jgh64pkup · 08-10-2009, 05:17 PM

do you want to sell them

i wish i had them
the castings on the fornt of the head didnt look like a stock head thats why i asked
they will make plenty of power
i didnt even notice the screw in studs

daverod · 08-10-2009, 05:42 PM

Will I be able to do this. It looks like fun.

Be cooler if it was a long bed.

YouTube - Dan's 66 chevy burnout

daverod · 08-10-2009, 05:43 PM

Quote:

Originally Posted by jgh64pkup

do you want to sell them

i wish i had them
the castings on the fornt of the head didnt look like a stock head thats why i asked
they will make plenty of power
i didnt even notice the screw in studs

Ok, How about $150 each. That's what I paid.

I changed my mind I'm keeping them.

. Screw in studs?

08-09-2009, 08:19 PM	#551
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Blacks beach. Don't look to close it will burn. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-09-2009 at 08:20 PM.

08-09-2009, 10:26 PM	#554
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Well atleast you can get yours to help you do stuff, mine *****es about everything I do. If I step foot in the garage other then to get stuff out the deep frezer she's at it. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

08-09-2009, 11:53 PM	#556
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Started to put my heads on. Got one side done. Put the other side on and started to freak because it did'nt look right. It was only covering half a hole. Turned out it was just some kind plug thing. Did kind screw up and put the wrong bolts ( I think) in on the bottom ( the short ones). They did'nt have a circle on top? I found the right ones later. I just took the wrong ones out and replaced themn with the circle ones retightened everything a couple times. Hope it will be ok. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-10-2009, 12:20 AM	#557
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Oh I'm getting excited. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-10-2009, 12:32 AM	#558
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Well atleast you can get yours to help you do stuff, mine ***es about everything I do. If I step foot in the garage other then to get stuff out the deep frezer she's at it. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"** Last edited by daverod; 08-10-2009 at 12:33 AM.

08-10-2009, 10:36 AM	#559
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 what heads are those __________________ Gage 1967 C10 Shortbed Stepside

08-10-2009, 11:45 AM	#561
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 thats all i hear from my parents i think my dad is the one that acts more like a woman __________________ Gage 1967 C10 Shortbed Stepside

08-10-2009, 04:15 PM	#564
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 what are the last three numbers in the casting number __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 08-10-2009 at 04:17 PM.

08-10-2009, 05:17 PM	#573
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 do you want to sell them i wish i had them the castings on the fornt of the head didnt look like a stock head thats why i asked they will make plenty of power i didnt even notice the screw in studs __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 08-10-2009 at 05:19 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.