John's Project - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*TheSebring* · 01-09-2010, 03:07 PM

He went and changed shirts yesterday and when he took his shirt off, I was wondering how he'd managed to get sun burned in this weather, LMAO. Chest and face were solid red. Said it was freezer burn

JohnC · 01-09-2010, 10:34 PM

Quote:

Originally Posted by highperf4x4

My water line froze up last night. I had to get under the house and open it up to thaw it out. It was almost refreezing as fast as I could thaw it. I had to throw all my tricks at it. It was after midnight before I got done. I was not in good shape today at all and I think I got a little frostbite. Especially on the lips

When you get a chance come on down and get some heat tapes. That way you won't have to do it again.

Quote:

Originally Posted by TheSebring

He went and changed shirts yesterday and when he took his shirt off, I was wondering how he'd managed to get sun burned in this weather, LMAO. Chest and face were solid red. Said it was freezer burn

That's nuts man! That is just one more reason why I don't like the cold!

**scotts62** · 01-09-2010, 10:35 PM

probably haller atcha tomorrow John to get those lights

JohnC · 01-09-2010, 10:37 PM

ok I should be home, if not I'll set them out.

**scotts62** · 01-09-2010, 10:39 PM

Quote:

Originally Posted by JohnC

ok I should be home, if not I'll set them out.

Ok cool, yeah we'll figure it it. Thanks

*highperf4x4* · 01-09-2010, 11:24 PM

Quote:

Originally Posted by menace121978

makes me wonder what kinda "tricks" your talking about!....

on second thought... i'll leave it alone!

I'll tell you what my last one was.......... I took several blankets, baked them in the dryer for about a half hour and then I made a "tunnel" by doubling them up and draping them over the water line end to end and then I stuck the dryer exhuast hose at one end and used my heat gun at the other end to simulate summer like atmosphere around the pipes. About 45 mins later I got it.

Quote:

Originally Posted by scotts62

what were you doing to make your lips.....

Cussing, mumbling, shaking, then froze shut.........

Quote:

Originally Posted by Inverter

Thats Funny!

You have a strange sense of humor!

Quote:

Originally Posted by JohnC

When you get a chance come on down and get some heat tapes. That way you won't have to do it again.

It has heat tape on it now. Some idiots came by a month ago and installed a new water meter under the house that sends out a radio signal to tell them how many gallons have been used. They did a piss poor job insulating the meter and the surrounding pipe. I'm gonna make a scene about it. Watch your local news stations.

joe231 · 01-10-2010, 12:57 AM

Quote:

Originally Posted by scotts62

Ok cool, yeah we'll figure it it. Thanks

Hey, lemme know when you are going, maybe I can ride down with ya, or you can pick up some stuff for me while your down that way

**scotts62** · 01-10-2010, 11:22 AM

Ok will do, kiddo might be with me, T has some school work to do..

0331grunt · 01-11-2010, 08:50 AM

Quote:

Originally Posted by highperf4x4

. I'm gonna make a scene about it. Watch your local news stations.

Will it be big enough scene to make it my way??

**scotts62** · 01-11-2010, 08:51 AM

more than likely

0331grunt · 01-11-2010, 09:04 AM

Quote:

Originally Posted by 0331grunt

Will it be big enough scene to make it my way??

Quote:

Originally Posted by scotts62

more than likely

I'll be waiting...

JohnC · 01-11-2010, 09:21 AM

Well he hasn't posted since. I don't know if that's good news or bad news.

*highperf4x4* · 01-11-2010, 11:59 PM

I just got bonded out today...................

no, I've settled down now that my belly has thawed out!

**scotts62** · 01-12-2010, 08:53 AM

Yeah sounds like he had a carrier bearing woop his arse... thats ok it happens to the best of us

*highperf4x4* · 01-12-2010, 12:25 PM

Fortunately, I have a good friend that works at a mechanic shop.

**scotts62** · 01-12-2010, 09:42 PM

glad i could be of some assistance

*highperf4x4* · 01-13-2010, 12:05 AM

I'm glad you could too.

**scotts62** · 01-13-2010, 09:01 AM

Get in in and rolling? No vibrations? Good to go? Just rambling on to put a ? after everything?

0331grunt · 01-13-2010, 10:15 AM

Quote:

Originally Posted by scotts62

Get in in and rolling? No vibrations? Good to go? Just rambling on to put a ? after everything?

??

Got the ?? mark thing again?? This seems to be popular??

JohnC · 01-13-2010, 04:59 PM

One of those inside jokes that make other people wonder why they put all the ?? for?

?

**scotts62** · 01-13-2010, 07:01 PM

Awe who knows?
Is it confusing or something?

?

Jonboy · 01-13-2010, 07:40 PM

No, why?

*highperf4x4* · 01-13-2010, 10:47 PM

Quote:

Originally Posted by scotts62

Get in in and rolling? No vibrations? Good to go? Just rambling on to put a ? after everything?

Yeah I had fun blowing the plastic out of the center U-joint after we installed the carrier bearing though. Sounded like a pistol going off!

**scotts62** · 01-13-2010, 11:15 PM

yeah, then sticks to your arm.. no fun

*highperf4x4* · 01-14-2010, 01:05 AM

I know, I got both arms no matter how I tried to stand. I need a 6ft torch next time.

01-09-2010, 03:07 PM	#551
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: John's Project He went and changed shirts yesterday and when he took his shirt off, I was wondering how he'd managed to get sun burned in this weather, LMAO. Chest and face were solid red. Said it was freezer burn

01-09-2010, 10:35 PM	#553
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project probably haller atcha tomorrow John to get those lights __________________ Scott 93 crew cab build Project 62

01-09-2010, 10:37 PM	#554
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project ok I should be home, if not I'll set them out.

01-10-2010, 11:22 AM	#558
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project Ok will do, kiddo might be with me, T has some school work to do.. __________________ Scott 93 crew cab build Project 62

01-11-2010, 08:51 AM	#560
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project more than likely __________________ Scott 93 crew cab build Project 62

01-11-2010, 09:21 AM	#562
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project Well he hasn't posted since. I don't know if that's good news or bad news.

01-11-2010, 11:59 PM	#563
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: John's Project I just got bonded out today................... no, I've settled down now that my belly has thawed out!

01-12-2010, 08:53 AM	#564
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project Yeah sounds like he had a carrier bearing woop his arse... thats ok it happens to the best of us __________________ Scott 93 crew cab build Project 62

01-12-2010, 12:25 PM	#565
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: John's Project Fortunately, I have a good friend that works at a mechanic shop.

01-12-2010, 09:42 PM	#566
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project glad i could be of some assistance __________________ Scott 93 crew cab build Project 62

01-13-2010, 12:05 AM	#567
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: John's Project I'm glad you could too.

01-13-2010, 09:01 AM	#568
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project Get in in and rolling? No vibrations? Good to go? Just rambling on to put a ? after everything? __________________ Scott 93 crew cab build Project 62

01-13-2010, 04:59 PM	#570
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project One of those inside jokes that make other people wonder why they put all the ?? for? ?

01-13-2010, 07:01 PM	#571
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project Awe who knows? Is it confusing or something? ? __________________ Scott 93 crew cab build Project 62

01-13-2010, 07:40 PM	#572
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: John's Project No, why? __________________ 1974 Jimmy- 5.3/4L80e/NP241



Register or Log In To remove these advertisements.

01-13-2010, 11:15 PM	#574
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: John's Project yeah, then sticks to your arm.. no fun __________________ Scott 93 crew cab build Project 62

01-14-2010, 01:05 AM	#575
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: John's Project I know, I got both arms no matter how I tried to stand. I need a 6ft torch next time.

Register or Log In To remove these advertisements.