How about some pics of Static Dropped C-10's - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 10-03-2014, 10:02 AM

Quote:

Originally Posted by smbrouss70

A half coil off of a 2" or 3" dropped spring? My Blazer has too much wheel gap for me, but I am trying to stay away from bags on this one.

I think it was actually 3/4s of a coil off of a 2" drop spring. I believe cutting 1/2 of a coil produces a 1" drop. I would start there and adjust as necessary.

Chaplain · 10-09-2014, 08:00 AM

...

rc32187 · 10-11-2014, 04:30 AM

4/5 drop with 20x10, 5.5" bs and 295/40 rear, 20x8.5, 4.75" bs and 255/40 front

pablo101 · 10-11-2014, 09:15 AM

My static drop is complete however need some advice. It's a ccp 5"rear springs, 2" modular spindles with 2" drop springs. The truck has 15x10 4"backspace wheels all the way around. I don't have much clearance up front for steering travel the wheels rub the lower control arms when turning..What are some of the wheel dimensions you all would recommend, I want to stay with 15" wheels.
Thanks in advance

slowcpe · 10-11-2014, 09:28 AM

rc, truck looks real good. I assume those are Ridlers? Do you have the '67 rear end with 5-lug axles or a '71-72?

rc32187 · 10-11-2014, 01:30 PM

Quote:

Originally Posted by slowcpe

rc, truck looks real good. I assume those are Ridlers? Do you have the '67 rear end with 5-lug axles or a '71-72?

Thanks, yes they're Ridler's. And to be honest I'm not sure what rear axle it has. There is probably only .25" clearance between the rear wheel and the inner side of the wheel tub. It's about as tight as it possibly could be without rubbing.

raiders804 · 10-20-2014, 12:55 PM

Quote:

Originally Posted by hairlesshobo

Hey therapy, how much drop is this in the front and rear? You mentioned spindles and springs up front but didn't say how much each was. I really like the looks of your truck!

Do you have any other pics of your truck by chance? I would love to see the front and rear suspension up close.

Great job!

awesome truck

pablo101 · 10-22-2014, 11:32 AM

Finally done...71 stepper...ccp 4/5 drop, 2" modular spindles 2" springs, 5" rear drop springs...15x10 wheels 4" back space but had to change the front wheels for steering clearance

jlsanborn · 10-22-2014, 03:07 PM

Quote:

Originally Posted by pablo101

Finally done...71 stepper...ccp 4/5 drop, 2" modular spindles 2" springs, 5" rear drop springs...15x10 wheels 4" back space but had to change the front wheels for steering clearance

Kool stepper!

bs46488 · 11-06-2014, 12:39 AM

RC

Could you take a tape measure and measured from the ground to the top center of the wheel openings front and rear?

rc32187 · 11-06-2014, 01:03 AM

Quote:

Originally Posted by bs46488

RC

Could you take a tape measure and measured from the ground to the top center of the wheel openings front and rear?

I would, but i actually just sold that truck on saturday. Sorry.

69restomod · 11-09-2014, 06:37 PM

Name: image.jpg
Views: 5938
Size: 67.0 KB

Ece 4/6 drop on 20s

ivorton74 · 11-10-2014, 12:56 PM

Quote:

Originally Posted by rc32187

I would, but i actually just sold that truck on saturday. Sorry.

Man how could u sell a beauty like that?? Man i would want to be buried in that if that was mine

rc32187 · 11-10-2014, 04:13 PM

Quote:

Originally Posted by ivorton74

Man how could u sell a beauty like that?? Man i would want to be buried in that if that was mine

Believe me, i didn't want to. But we're building a new house and that takes priority. I miss the truck already. Lol

LUV2XCLR8 · 11-10-2014, 06:06 PM

Fresh pictures of my 2wd Blazer from CTC with 5.5/7.5 Static on 20/22's Coy's

ivorton74 · 11-10-2014, 06:52 PM

Quote:

Originally Posted by rc32187

Believe me, i didn't want to. But we're building a new house and that takes priority. I miss the truck already. Lol

Ugh dont u just hate priorities lol...kidding...well u cant live in the truck. U can always buy and build another one

ddr11 · 11-14-2014, 09:50 AM

static dropped 18's and 20's

zipper · 01-04-2015, 02:43 AM

https://anchorage.craigslist.org/pts/4805136741.html

Looking at purchasing these wheels to put on my 1968 c10 stepside with the ECE 4.5/6 drop. Will they fit? Its alright if I have to buy new tires for them to fit.

03glide · 01-04-2015, 11:15 AM

4.5/6 CPP parts

JAC10K · 01-05-2015, 09:45 AM

Three up front, 5 in the rear. CPP shocks and springs only so far. The green wheels were just to see how it would look. I'm about to switch them out with some BBS CH-Rs I had on another car.

chevyrestoguy · 01-11-2015, 05:24 PM

Here's my '64:
Front: 1979 C10 front suspension, 3" drop spindles, 1 coil removed, 2" chassis Z, wheelbase moved forward 1" to center the wheels in the front fenders, lower control arms moved 3/4" forward to gain caster. Front wheels 15x6, tires, 215/60-15. Total drop: 7

Rear: 1979 C10 12-bolt narrowed 3 inches total, 5" drop coil, 2" block, ECE Super Track Bar, shocks relocated, forward trailing arm brackets flipped, frame is C-notched. Wheels 15x8.5, tires 265/70-15. Total drop: 7

Ekliptix · 01-12-2015, 07:09 PM

4.5/6.25 ECE drop.
Front: 2.5" drop spindle, 2" drop spring.
Rear: 6" drop spring, 1/4" spacer.
275/60/15 all around. Some rubbing in the front over bumps, so I recommend a slightly more narrow tire up front.

Install thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612794

jlsanborn · 01-12-2015, 07:53 PM

Quote:

Originally Posted by Ekliptix

4.5/6.25 ECE drop.
Front: 2.5" drop spindle, 2" drop spring.
Rear: 6" drop spring, 1/4" spacer.
275/60/15 all around. Some rubbing in the front over bumps, so I recommend a slightly more narrow tire up front.

Install thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612794

Killer looking truck on 15's!

JAC10K · 01-13-2015, 04:42 PM

Latest

72ChevyMan1 · 01-16-2015, 12:15 AM

Out of curiousity if I go the 5/7 route, is there any other modifications besides the new springs I'd have to do?! I'm wanting to run 20 inch wheel.

10-09-2014, 08:00 AM	#552
Chaplain Registered User Join Date: Oct 2014 Location: TN Posts: 294	Re: How about some pics of Static Dropped C-10's ...

10-11-2014, 04:30 AM	#553
rc32187 Registered User Join Date: Sep 2014 Location: Raymond, Washington Posts: 22	Re: How about some pics of Static Dropped C-10's 4/5 drop with 20x10, 5.5" bs and 295/40 rear, 20x8.5, 4.75" bs and 255/40 front

10-11-2014, 09:15 AM	#554
pablo101 Registered User Join Date: May 2014 Location: Auburn Posts: 145	Re: How about some pics of Static Dropped C-10's My static drop is complete however need some advice. It's a ccp 5"rear springs, 2" modular spindles with 2" drop springs. The truck has 15x10 4"backspace wheels all the way around. I don't have much clearance up front for steering travel the wheels rub the lower control arms when turning..What are some of the wheel dimensions you all would recommend, I want to stay with 15" wheels. Thanks in advance

10-11-2014, 09:28 AM	#555
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: How about some pics of Static Dropped C-10's rc, truck looks real good. I assume those are Ridlers? Do you have the '67 rear end with 5-lug axles or a '71-72? __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold Last edited by slowcpe; 10-11-2014 at 09:34 AM.

10-22-2014, 11:32 AM	#558
pablo101 Registered User Join Date: May 2014 Location: Auburn Posts: 145	Re: How about some pics of Static Dropped C-10's Finally done...71 stepper...ccp 4/5 drop, 2" modular spindles 2" springs, 5" rear drop springs...15x10 wheels 4" back space but had to change the front wheels for steering clearance

11-06-2014, 12:39 AM	#560
bs46488 Registered User Join Date: May 2014 Location: San Diego, CA Posts: 547	Re: How about some pics of Static Dropped C-10's RC Could you take a tape measure and measured from the ground to the top center of the wheel openings front and rear?

11-09-2014, 06:37 PM	#562
69restomod Registered User Join Date: Feb 2014 Location: Fenton, missouri Posts: 131	Re: How about some pics of Static Dropped C-10's Ece 4/6 drop on 20s

11-10-2014, 06:06 PM	#565
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: How about some pics of Static Dropped C-10's Fresh pictures of my 2wd Blazer from CTC with 5.5/7.5 Static on 20/22's Coy's Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-14-2014, 09:50 AM	#567
ddr11 Registered User Join Date: Nov 2013 Location: sumter sc Posts: 79	Re: How about some pics of Static Dropped C-10's static dropped 18's and 20's Attached Images

01-04-2015, 02:43 AM	#568
zipper Registered User Join Date: Aug 2013 Location: Anchorage Alaska Posts: 55	Re: How about some pics of Static Dropped C-10's https://anchorage.craigslist.org/pts/4805136741.html Looking at purchasing these wheels to put on my 1968 c10 stepside with the ECE 4.5/6 drop. Will they fit? Its alright if I have to buy new tires for them to fit.

01-04-2015, 11:15 AM	#569
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	Re: How about some pics of Static Dropped C-10's 4.5/6 CPP parts Attached Images

01-05-2015, 09:45 AM	#570
JAC10K Registered User Join Date: Nov 2014 Location: Alexandria, VA Posts: 61	Re: How about some pics of Static Dropped C-10's Three up front, 5 in the rear. CPP shocks and springs only so far. The green wheels were just to see how it would look. I'm about to switch them out with some BBS CH-Rs I had on another car. Attached Images __________________ _____________________ '72 C10 Custom Fleetside Last edited by JAC10K; 01-05-2015 at 10:06 AM.

01-11-2015, 05:24 PM	#571
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: How about some pics of Static Dropped C-10's Here's my '64: Front: 1979 C10 front suspension, 3" drop spindles, 1 coil removed, 2" chassis Z, wheelbase moved forward 1" to center the wheels in the front fenders, lower control arms moved 3/4" forward to gain caster. Front wheels 15x6, tires, 215/60-15. Total drop: 7 Rear: 1979 C10 12-bolt narrowed 3 inches total, 5" drop coil, 2" block, ECE Super Track Bar, shocks relocated, forward trailing arm brackets flipped, frame is C-notched. Wheels 15x8.5, tires 265/70-15. Total drop: 7 __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

01-12-2015, 07:09 PM	#572
Ekliptix Registered User Join Date: Aug 2013 Location: Calgary, Alberta Posts: 683	Re: How about some pics of Static Dropped C-10's 4.5/6.25 ECE drop. Front: 2.5" drop spindle, 2" drop spring. Rear: 6" drop spring, 1/4" spacer. 275/60/15 all around. Some rubbing in the front over bumps, so I recommend a slightly more narrow tire up front. Install thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612794

01-13-2015, 04:42 PM	#574
JAC10K Registered User Join Date: Nov 2014 Location: Alexandria, VA Posts: 61	Re: How about some pics of Static Dropped C-10's Latest Attached Images __________________ _____________________ '72 C10 Custom Fleetside



Register or Log In To remove these advertisements.

01-16-2015, 12:15 AM	#575
72ChevyMan1 Registered User Join Date: Nov 2013 Location: Wamego Kansas Posts: 43	Re: How about some pics of Static Dropped C-10's Out of curiousity if I go the 5/7 route, is there any other modifications besides the new springs I'd have to do?! I'm wanting to run 20 inch wheel.

Register or Log In To remove these advertisements.