What did you do to your truck today?

[CdM]

on the k10... installed the 38 super swampers. adjusted the timing a bit more.. gonna advance it 2 more degrees to put me at 33 overall. Put the hood on it. Going to go smash the crap outta it tomorrow at the dunes 8)
On the 66... I sat in the garage and stared at her while drinking a beer imaging how sweet she will look with porter-built drop members 8)

[Rich 5150 69]

Cut the front valance out of the donor hood to replace mine with (rust out in the corners ) just have to finish cleaning it up and cut mine out.

[eddie1]

Removed the box yet again & reinstalled the hood. I am trying to sort out the fuel filler positioning for the under bead fuel tank. Goes to the exhaust shop tomorrow.

[towersddg9]

Put the other fender on, had to pull the steering shaft out, the power steering hoses I made fit fine under etc, no issues, also got the seat from Glide Engineering, with mounts and foam, will have it covered with the door panels and visors.

[MikeS.]

Changed all the hoses in the engine compartment along with the thermostat. Replaced the gas tank. Pulled the radiator, gonna have it tested but I bet it will need replaced. It's been repaired at least once before.

Spent 3.5 hours waiting at DMV to do 10 mins worth of work. Got pl & pd insurance while I waited. Burb is now registered to me, I went with an antique plate. Limits when I can drive it but it'll be good for the rest of this year anyway.


Posted via Mobile Device

[mud.man.rj]

Sarted to retofit an single electric fan for backup when extended idling, only goes to 215 max when idling for a long time but 180 normal driving, so used a temp sensor wired into the intake crossover to come in at 195. Finish it tomorrow and take pic's.

[eddie1]

Got it towed to the exhaust shop for the new duals.

[BenkeBird]

I drove my -62 panel to my shop and I filled some air in right rear tire and hade a tour around my town, Solleftea in Sweden, in the sunny weather and I just feel good.

[ChiefRocka]

MY daughter and I patina'd out some stock wheels ....
-
-

[Jeff La]

Originally Posted by ChiefRocka

MY daughter and I patina'd out some stock wheels ....
-
-

Awesome Pic, Man she's gonna make you pay when she get older

[badriand]

shaved the ol tailgate paint chippers

[glos55]

Drove to body shop last night. It's in for facelift and new hot rod flatz red paint below the new base/clear white top.

[MikeS.]

Originally Posted by BenkeBird

I drove my -62 panel to my shop and I filled some air in right rear tire and hade a tour around my town, Solleftea in Sweden, in the sunny weather and I just feel good.

Willkommen! At least I think that's how you Swedes spell Welcome

Now then, we need pictures, a lot of pictures. You can even host them here for free.

[MikeS.]

Here is some more pics of what I've been doing to my 63 4x4 Burb.



New tires, they have been mounted previously but never put on a vehicle. In new condition.




New Warn hubs and new Optima battery.
Several more new pics in my gallery, including parts still to be installed.

[Chevy Fleetside]

I pulled the front sheetmetal out from under my bed and bolted it up. It has been under there so long the dust looked like snow. Nasty.

[198plus]

Originally Posted by Chevy Fleetside

I pulled the front sheetmetal out from under my bed and bolted it up. It has been under there so long the dust looked like snow. Nasty.

Lookin good..............Get er done

[ABX131]

Got the 6 tranny bolts and 3 torque converter bolst in tonight....now I can start to put the transfer case and drive shafts back in....hope to be taking a test drive by the end of the weekend.

[dantimdad]

Removed the bed finally.



Next up is buying an engine hoist and removing the engine, trans and cab. Should have that done next weekend.

Steven

[62 Barnfind]

Removed all the excess seam sealer.

[ArmedAffliction]

Finished the body work and put the 5" drop coils on the rear 3" front coils tomorrow oh and i put new drop shocks on the back and front ones tomorow
Posted via Mobile Device

[jbgroby]

Got the inner fenders back from the painter he did a good job with the undercoat. I cut and put on the weatherstrip. Once the adheavesive dries tomorrow, I'll try and mount these up, I'm glad I waited to get a matched set of 60-61 oem fenders, the after market stuff is really cut wrong.

[markeb01]

Picked up an early GMC horn button so I can start experimenting with grille emblems.

[AngryPirate]

Took a part the steering wheel and part of the column. Fixed the turn signal switch at the bottom of the column (inside the firewall), replaced the cam and fabricated a new turn signal arm.
Put all of the steering wheel horn parts back in since nearly all were missing.

Started doing the 66 style e-brake conversion only to find out the rear cables I have are completely wrong. Like, not even close.

New parts ordered. The Woogaroo rear drum brake step-by page was super helpful,

[catfish2]

well the rag joint arrived today from "rock auto" so this evening was spent fitting the power steering, i had previously made the pump mounting brackets,acquired the hoses, and made an adaptor plate similar to captainfabs, after alot of trial and error with templates,clamps, and the like, it turned out pretty good and drives nice and smooth, i,ll do a proper alignment job at the weekend but i dont think its too far out. next job is to find a decent bench seat,[their a bit thin on the ground here in the uk.] may have to look into recovering the old tatty one.
the search function on here has been a real help to me with all the available info, thanks guys, i hope one day i can give something back.

[Cody63]

Got my truck inspected today and the rally rims put on it. Looks so much better. Can't wait to get it registered so I can actually drive it legally.