The Ultimate Craigslist find thread

[C10 - C90 Bill]

Nice truck.

Glad to see it has a Manual Trans.

[factorystock]

Interesting to see lock ring wheels still being used on a 1990.

[crazyjeenyus]

Heck, the seat is worth the asking price on this one:

https://www.kijiji.ca/v-classic-cars...0292?undefined

[straight6chevyguy]

1987 GMC Horse Van - $4000
https://portland.craigslist.org/yam/...074910509.html

[jumpsoffrock]

Originally Posted by factorystock

Interesting to see lock ring wheels still being used on a 1990.

I feel the same way.
It's unfathomable that at a time when you could no longer buy a carbureted vehicle brand new, but we still sold vehicles with split rims......

[sweetk30]

Originally Posted by jumpsoffrock

I feel the same way.
It's unfathomable that at a time when you could no longer buy a carbureted vehicle brand new, but we still sold vehicles with split rims......

your mixing terms that dont mean the same .

split rim = the death rim and 2 half's twist and pop apart .

lock ring is just this a ring drops in to a full ring and locks to the main rim body .

i never got to play with true split rims but di lots and lots of lock ring and never had a problem .

[jumpsoffrock]

so lock rings are not nearly s dangerous as split rims? I did not know that. I thought lock rings were just "a little safer", not "night and day". Thanks for the clarification.

[sweetk30]

Originally Posted by jumpsoffrock

so lock rings are not nearly s dangerous as split rims? I did not know that. I thought lock rings were just "a little safer", not "night and day". Thanks for the clarification.

biggest thing with them i was shown was CLEAN the rim grove were it sits as clean of rust and dirt and paint as possible . then air up the tire 10-20 psi or until the tire pushes up the ring and starts to lock in the lock ring . then take a 3-4 lb hammer and tap the lock ring to make sure its seated good . then air it up a bit more and recheck seat . if good fill it up .

also best to do this in a cage if you can like any big truck tire or super high psi setup should be .

oh ya also make sure NOT to mix up the rings and locks . some can be a bit different in shape and not lock in right .

[factorystock]

I agree with you sweetk30, the lock ring wheels were considered safe by the industry and still being used in the 90's. I guess it boils down to economics, they require more skilled labor, which means more expensive to deal with vs. a solid rim which is simple and requires less skill. IMO, it was favored in heavy duty extreme work vs. flat highway hauling work. I understand all the advantages of the solid rims and radials, but, I'm beginning to miss the look of a heavy duty bias ply tire on a lock ring wheel, not only on big rigs, but on pre mid 70's 3/4 and 1 ton pickups.

[Greg58]

Here is a 48 Snub Nose on Big Iron auction in Potter Ne. 3-25-20 close.
https://www.bigiron.com/Lots/1948Che...seSAGrainTruck
Also a 62 same auction.
https://www.bigiron.com/Lots/1962Che...60SAGrainTruck

[5Tractorguy]

Looking around the US for trucks on FB and found this beaut again! Boy I want this one bad, nothing better than a 60-66 twin screw with 2 sticks.

https://www.facebook.com/marketplace...8154097211264/

[C10 - C90 Bill]

With no hood emblems, I was first thinking Canadian, unless someone took them off. Strange that it has a 6500 front bumper, but is only a 5000. Also never remember "Diesel" under the series emblem. Still could be Canadian. Cool truck though. I also like the Tandem as well as the 2 Sticks. Also has Air Brakes.

[68panelman]

Saw this also 5000 tandem also, not too far from me either. I'd have to go back to a diesel though, regardless of the cheap gas prices now, haha
Maybe 6V92-71-53? Mmmm. This would surely grant me divorce papers

[davischevy]

That thing is cool. I too, would have to go to a Detroit Diesel.

[C10 - C90 Bill]

A 6-71 would be nice.

GMC should of had Detroits in them anyway back then.

Funny, Chevy did with a 4-53.

GMC did though in the Model B.

[68panelman]

6-71 would be nice, but figured a V would be easier install without firewall modification. Got an emblem if you want to go back to a Toroflow,...Hahaha

[C10 - C90 Bill]

They did put 6-71's in the B though, as well as 702 V-12's. That would be interesting to compare firewalls between the B and C.

[68panelman]

B models look to have a higher cab mounting?, I guess a lot of engine sits lower in frame?, You ever been inside one Bill?

[C10 - C90 Bill]

Right, the B is definitely higher and that could be the reason why they would fit better. I've might have peeked inside one or two through the years, but never drove one or sat in one. I do remember a large dog house and seem to remember the shifter being further back similar to where a shifter is located on a 9500 (short hood) with a 6-71.

The best one I can remember was in a junk yard. It was a B 7500. Had a 6-71 and and I believe a 10-Speed Road Ranger. Pretty much like your picture above. It was impressive.

[davischevy]

1971 Chevrolet c60
Dallas, TX · over a week ago ·
$2,500


About This Vehicle

Automatic transmission

Exterior color: Red · Interior color: Red

Seller's Description
Listing for a buddy. He has this 1971 Chevy c60 with 427. Bought it about 6 months ago and drove it off the trailer running rough because of bad gas and has sat since then. Great candidate for custom build out. Has texas title , in Dallas near love field. Will need to provide transport.

https://www.facebook.com/marketplace...3716609496646/

[68bowtie]

Not really craigslist, but I just bought a 67 off a guy who wants to sell this truck. If anybody is interested, send me a PM and I'll pass along the contact info (it's not mine). Probably available cheap...

[C10 - C90 Bill]

Originally Posted by davischevy

1971 Chevrolet c60
Dallas, TX · over a week ago ·
$2,500


About This Vehicle

Automatic transmission

Exterior color: Red · Interior color: Red

Seller's Description
Listing for a buddy. He has this 1971 Chevy c60 with 427. Bought it about 6 months ago and drove it off the trailer running rough because of bad gas and has sat since then. Great candidate for custom build out. Has texas title , in Dallas near love field. Will need to provide transport.

https://www.facebook.com/marketplace...3716609496646/

States Auto Trans, but I don't know why. It has a Clutch Pedal, Shifter and what looks like a 2-Speed Rear. Cool Truck. Also has Air Brakes. Wish it was closer.

[HO455]

C30 with a diesel part out. Not mine nor am I affiliated with the business in any way. I just thought it help someone with Toro parts.

https://portland.craigslist.org/clk/...092663808.html

1976 CHEVY TRUCK C30 DUALLY, Parting Out, Stock #ZH7434
Motor / Transmission TOTO-FLOW GMC 6CYL. DH478 DIESEL TWIN TURBO
5SPEED NP540 WITH A UNDER/DIRECT/OVERDRIVE UNIT SPICER 5831C
May Also Fit: 73-80

GRILL $35.00 BROKEN/PARTS
FRONT BUMPER $50.00 BENT
FENDERS $75.00 Each SOME RUST
HEADLAMPS $10.00 Each HLP/BRKT ONLY
HOOD $65.00 SOME RUST
FRONT DOORS $150 DRIVER 100.00 PASS BARE
SEAT $100.00 CORE RIP
ENGINE $700.00 DH478 DIESEL V6 TWIN TURBO CORE
*********TURBOS AND MANIFOLDS SOLD*****************
TRANSMISSION $450.00 NP540 5SPEED
OVERDRIVE UNIT $350.00 SPICER 5831C UNDER/DIRECT/OVERDRIVE*********SOLD********
REAR AXLE ASSEMBLY $350.00
WHEELS $50.00 EACH

[HO455]

68 5500 part out. Once again not mine!

https://portland.craigslist.org/clc/...107822312.html

GMC 5500 V-SIX - Orange - Selling for Parts:
* V-6 Engine - runs good - $450
* 2-speed rear end - $250
* 4-speed manual transmission - $250
* 2-speed rear end with actuator - $250
* Fuel tank - $100
* Wheels / Tires - ask
* Misc body parts - ask
BEST OFFER - possible trade / barter for silver or other item(s) of comparable value
IF AD IS UP IT'S AVAILABLE --

[Pvmt-Pndr]

I'd love to have the fuel tank off of that. Nice find