What did you do to your truck today? - Page 272 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

markeb01 · 05-06-2013, 04:43 AM

Initiated the process of pulling my engine.

TJ's Chevy · 05-07-2013, 07:29 PM

I painted my side covers today. Blue was a little lighter than expected.

jbgroby · 05-08-2013, 07:57 AM

you are in Canada why do you need a/c

MARTYZ · 05-08-2013, 10:19 PM

Quote:

Originally Posted by jbgroby

you are in Canada why do you need a/c

Gets pretty warm up here once the igloos all melt

donthekawguy · 05-08-2013, 11:18 PM

I tried to install the new rubber line for the rear brakes and it wouldn't come lose from the hard line. Good thing I got a new complete kit last week. But the rubber line is the wrong size so I need to call classic parts and see what to do. They have the wrong line listed on the site for my 66.

**ChevyJr** · 05-09-2013, 11:27 AM

Cleaned up the 700r4 I'm swapping into my '65

robber grin · 05-09-2013, 11:38 AM

Having installed the TH350C on the 283 in my 62 C10 day or so ago - last night after some thought and scrounging for steel I went to work on a rear crossmember for the tail shaft mount.

I cut the original standard crossmember down and came up with this piece.

Hope to put it in tonight...
rg

Blue_Aura · 05-11-2013, 01:40 AM

Went for a 3 hour round trip drive to go pick up some TJ springs for $10.

Sanded down my air cleaner that was going to be matched to the blue metallic paint on my engine. I had to change up my scheme for the valve covers and air cleaner since the masking job turned out to be a nightmare!
Posted via Mobile Device

donthekawguy · 05-08-2013, 12:20 PM

I got the rear end in, hooked up the shocks, put in the new track bar. I still need to put the driveline in, replace the rubber brake line, fill the diff and put all new brake stuff on. It's nice to have all new shiny parts on!

LVPhotos · 05-08-2013, 07:32 PM

Back home. Took the 1962 out for a ride and updated my build thread. Got the hood back from paint, final bodywork no seams, just in time to get to show on Sat. Working on striping doors.

LVPhotos · 05-08-2013, 07:35 PM

Cleaned for show, set ride height. Lil low, hit stops without the rear shocks.

ca90ss · 05-08-2013, 07:48 PM

Pulled the cylinder head to be rebuilt before putting it on the donor engine. Found out what was rattling around in the old engine

SCHRUMGMC · 05-08-2013, 11:48 PM

Nice white truck man

LT1 Burb · 05-09-2013, 01:03 AM

Picked up a nice gauge set and cleaned the garage so I can start bodywork.

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

SCHRUMGMC · 05-09-2013, 01:18 AM

Went to the Bank and Cashed my Government Check I got and turned my 20's into one HUNDRED dollar bills ...Got a trailer to pick up tomorrow and go get my Truck

MikeS. · 05-09-2013, 02:12 AM

I got the 2nd gas tank back from repair and installed in the motor home.
Posted via Mobile Device

WCHLVR · 05-09-2013, 03:40 AM

Make this my first post-

Installed some 64 Cadillac Hub Caps on my new 64 Custom. If you know about Caddy caps you know this is not any easy task! LOL

Used them as a cheap way to cover the rusty chrome mods it has on it!

As you can see I also took off the All Terrains in favor of some passenger car tires. 3" whites coming soon!

CRGRS 66 · 05-09-2013, 12:35 PM

Quote:

Originally Posted by WCHLVR

Make this my first post-

Installed some 64 Cadillac Hub Caps on my new 64 Custom. If you know about Caddy caps you know this is not any easy task! LOL

As you can see I also took off the All Terrains in favor of some passenger car tires. 3" whites coming soon!

Nice Truck, caps look good on there, welcome aboard!!

WCHLVR · 05-09-2013, 02:46 PM

Quote:

Originally Posted by dantimdad

Nice truck!

Welcome to the board!

I would have never thought hubcaps would work those rims.

Steven

Quote:

Originally Posted by CRGRS 66

Nice Truck, caps look good on there, welcome aboard!!

Thanks for the props folks. Yeah... it took a little creative engineering to make the caps happen. Super pleased with the results though!

dantimdad · 05-09-2013, 10:40 AM

Nice truck!

Welcome to the board!

I would have never thought hubcaps would work those rims.

Steven

racecougar · 05-09-2013, 10:43 AM

Pulled the stock sixxer and three-speed. Once I get the rust repair on the cab finished up, we'll take it down to a bare frame.

CRGRS 66 · 05-09-2013, 12:36 PM

Quote:

Originally Posted by racecougar

Pulled the stock sixxer and three-speed. Once I get the rust repair on the cab finished up, we'll take it down to a bare frame.

Is it just me? Your truck looks like it is leaning significantly to the passenger side...

racecougar · 05-09-2013, 03:38 PM

Quote:

Originally Posted by CRGRS 66

Is it just me? Your truck looks like it is leaning significantly to the passenger side...

The frame is level, but the cab is absolutely leaning, as I'm in the middle of replacing the floor pans, cab supports, door pillars, rocker panel, cab corner, etc on the driverside...it's all in my build thread.

robber grin · 05-10-2013, 09:26 AM

Welcome home WCHLVR!

Many many build pics are appreciated...
rg

T2vigil · 05-10-2013, 11:33 AM

One headlight connector later I finally got all of the lights working as they should including the "Bright Lights" in the instrument panel. Now I have no issues with driving at night.

05-06-2013, 04:43 AM	#1
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Initiated the process of pulling my engine. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

05-07-2013, 07:29 PM	#2
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today? I painted my side covers today. Blue was a little lighter than expected. Attached Images

05-08-2013, 07:57 AM	#3
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? you are in Canada why do you need a/c __________________ http://s1299.photobucket.com/user/jb...23904108567829

05-08-2013, 11:18 PM	#5
donthekawguy Registered User Join Date: Aug 2012 Location: Rathdrum ID Posts: 1,129	Re: What did you do to your truck today? I tried to install the new rubber line for the rear brakes and it wouldn't come lose from the hard line. Good thing I got a new complete kit last week. But the rubber line is the wrong size so I need to call classic parts and see what to do. They have the wrong line listed on the site for my 66. __________________ 66 shorty

05-09-2013, 11:27 AM	#6
ChevyJr Junior Member Join Date: Feb 2013 Location: Minneapolis Posts: 87	Re: What did you do to your truck today? Cleaned up the 700r4 I'm swapping into my '65 Attached Images

05-09-2013, 11:38 AM	#7
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Having installed the TH350C on the 283 in my 62 C10 day or so ago - last night after some thought and scrounging for steel I went to work on a rear crossmember for the tail shaft mount. I cut the original standard crossmember down and came up with this piece. Hope to put it in tonight... rg Attached Images

05-11-2013, 01:40 AM	#8
Blue_Aura Registered User Join Date: Aug 2012 Location: Tracy, CA Posts: 251	Re: What did you do to your truck today? Went for a 3 hour round trip drive to go pick up some TJ springs for $10. Sanded down my air cleaner that was going to be matched to the blue metallic paint on my engine. I had to change up my scheme for the valve covers and air cleaner since the masking job turned out to be a nightmare! Posted via Mobile Device __________________ Current Vehicles: '62 C10 - 350 (current project), '03 Tahoe (C Series) Some Past Projects: '69 Nova - 350 , '70 1/2 Camaro Z28 - LT1 350, '73 K20 Full-time 4x4 - 400 SB, '77 1/2 Camaro Z28 - 350, '84 Camaro Z28 - 305, '68 Buick - 430 BB

05-08-2013, 12:20 PM	#9
donthekawguy Registered User Join Date: Aug 2012 Location: Rathdrum ID Posts: 1,129	Re: What did you do to your truck today? I got the rear end in, hooked up the shocks, put in the new track bar. I still need to put the driveline in, replace the rubber brake line, fill the diff and put all new brake stuff on. It's nice to have all new shiny parts on! Attached Images __________________ 66 shorty

05-08-2013, 07:32 PM	#10
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: What did you do to your truck today? Back home. Took the 1962 out for a ride and updated my build thread. Got the hood back from paint, final bodywork no seams, just in time to get to show on Sat. Working on striping doors. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

05-08-2013, 07:35 PM	#11
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: What did you do to your truck today? Cleaned for show, set ride height. Lil low, hit stops without the rear shocks. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

05-08-2013, 07:48 PM	#12
ca90ss Registered User Join Date: Feb 2013 Location: Port Hueneme, Ca Posts: 42	Re: What did you do to your truck today? Pulled the cylinder head to be rebuilt before putting it on the donor engine. Found out what was rattling around in the old engine

05-08-2013, 11:48 PM	#13
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Nice white truck man __________________ 1971 GMC Sierra 1959 GMC 100

05-09-2013, 01:03 AM	#14
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: What did you do to your truck today? Picked up a nice gauge set and cleaned the garage so I can start bodywork. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images

05-09-2013, 01:18 AM	#15
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Went to the Bank and Cashed my Government Check I got and turned my 20's into one HUNDRED dollar bills ...Got a trailer to pick up tomorrow and go get my Truck __________________ 1971 GMC Sierra 1959 GMC 100

05-09-2013, 02:12 AM	#16
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: What did you do to your truck today? I got the 2nd gas tank back from repair and installed in the motor home. Posted via Mobile Device __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447



Register or Log In To remove these advertisements.

05-09-2013, 03:40 AM	#17
WCHLVR Registered User Join Date: Apr 2013 Location: Bend, Oregon Posts: 126	Re: What did you do to your truck today? Make this my first post- Installed some 64 Cadillac Hub Caps on my new 64 Custom. If you know about Caddy caps you know this is not any easy task! LOL Used them as a cheap way to cover the rusty chrome mods it has on it! As you can see I also took off the All Terrains in favor of some passenger car tires. 3" whites coming soon!

05-09-2013, 10:40 AM	#20
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Nice truck! Welcome to the board! I would have never thought hubcaps would work those rims. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

05-09-2013, 10:43 AM	#21
racecougar Registered User Join Date: Jan 2013 Location: Imperial, MO Posts: 1,003	Re: What did you do to your truck today? Pulled the stock sixxer and three-speed. Once I get the rust repair on the cab finished up, we'll take it down to a bare frame. __________________ Rod @ AzzKicker Cars 1965 C10 SWB - Build Thread

05-10-2013, 09:26 AM	#24
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Welcome home WCHLVR! Many many build pics are appreciated... rg

05-10-2013, 11:33 AM	#25
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: What did you do to your truck today? One headlight connector later I finally got all of the lights working as they should including the "Bright Lights" in the instrument panel. Now I have no issues with driving at night.

Register or Log In To remove these advertisements.