parting out 1972 cheyenne super lwb - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OhNoJoe · 05-29-2007, 07:41 AM

What do you have left as far as the A/C sutff. Do you have the whole set-up

Down south truckin · 05-29-2007, 06:07 PM

Quote:

Originally Posted by OhNoJoe

What do you have left as far as the A/C sutff. Do you have the whole set-up

this one is just pieces but i have a complete system that just came off a truck a few months ago it had been sitting for 10-12 years so i don't know if it works or not but it was all there and complete $400 picked up thanks Mike

ClassicRedneck05 · 05-29-2007, 07:46 AM

Do you happen to already have the steering column pulled if so can you show some photo's thanks

Down south truckin · 05-29-2007, 06:10 PM

Quote:

Originally Posted by ClassicRedneck05

Do you happen to already have the steering column pulled if so can you show some photo's thanks

i have a 69-70 style that is out or i could pull a 71-72 style tommorrow let me know thanks Mike

DennyB · 05-29-2007, 06:52 PM

Mike,
Is the lower rear trim behind the rear wheels any good (drivers quality)?

Thanks,

Down south truckin · 05-29-2007, 08:35 PM

Quote:

Originally Posted by ClassicRedneck05

Do you happen to already have the steering column pulled if so can you show some photo's thanks

classicredneck05 here are some pics of the 69-70 column it's $50 plus shipping in case anyone else is interested if classicredneck05 does'nt want it thanks Mike p.s. The steering wheel is not included at that price!

ddp · 05-29-2007, 09:59 AM

Thanks for the detailed pics of the diverter box but it looks to be about the same condition as my original. I'll pass on the box and "s" duct. Thanks for your time.

Don

mcarwile1 · 05-29-2007, 07:36 PM

Is the evaporator housing in good shape? I need on for a 72 cheyenne. Thanks

Down south truckin · 05-29-2007, 07:55 PM

Quote:

Originally Posted by DennyB

Mike,
Is the lower rear trim behind the rear wheels any good (drivers quality)?

Thanks,

DennyB I'll check it out tommorrow and get back with you

Quote:

Originally Posted by mcarwile1

Is the evaporator housing in good shape? I need on for a 72 cheyenne. Thanks

I'll check but I'm 99% sure it is not busted

OhNoJoe · 05-29-2007, 11:55 PM

Will you ship on my dime?

Down south truckin · 05-30-2007, 07:54 PM

Quote:

Originally Posted by OhNoJoe

Will you ship on my dime?

yes i will ship the stuff for the actual cost of shipping and packaging supplies are you talking about the whole A/C setup?

ClassicRedneck05 · 05-30-2007, 06:06 AM

is the other column a tilt?

Down south truckin · 05-30-2007, 07:59 PM

Quote:

Originally Posted by ClassicRedneck05

is the other column a tilt?

I've got a truck tilt that has a little slop in the joint i have a friend that can tighten them up but i have'nt made time to get together with him i yhink it needs a lower bearing also i would let it go for $225 as is or if we repair it itwould be in the $275-$300 range thanks Mike

Down south truckin · 05-30-2007, 10:14 PM

dennyb the moulding on 2 trucks that i can get to easily are all bent i'll keep looking

mcarwile1 here are pics of the evaporator housing i hope this is the part your looking for i did not see any cracks $25 plus shipping i think the p/o pulled the evaporator to sell for scrap metal

ClassicRedneck05 · 05-31-2007, 02:52 PM

well if you already have someone to repair it then i wouldn't mind paying that extra few just to have a better column

AH619 · 06-01-2007, 01:35 PM

ill take the hump if shipping is reasonable 72601

Down south truckin · 06-03-2007, 11:10 PM

Quote:

Originally Posted by AH619

ill take the hump if shipping is reasonable 72601

AH619 shipping looks to be $18 let me p/m kwmech he has neither confirmed or denied his intrest in this hump thanks Mike

Down south truckin · 06-04-2007, 01:15 AM

Quote:

Originally Posted by AH619

ill take the hump if shipping is reasonable 72601

kwmech just passed on it so it's yours if you are still interested thanks Mike

*Shane* · 06-01-2007, 05:09 PM

Did that truck have black seat belts? If so, do you still have them? Interested in driver's, passenger, and center, IF they are black.

Thanks,
shane

Aarons72s · 06-01-2007, 10:48 PM

I am interested in the bushing/ nut that is in the cowl and can be seen under the dash that the pin on the end of the flapper goes into. It is not in the pic so I asome it is still on the cab. If it is still good could I get a pic and price to 73099, pending sneezys72 does not need it also. Thanks

KFreddy · 06-01-2007, 11:13 PM

I would be interested in the upper and lower body molding, any chance of some close up pics and a full count of whats there?

Thank You

Down south truckin · 06-03-2007, 11:14 PM

Quote:

Originally Posted by Shane

Did that truck have black seat belts? If so, do you still have them? Interested in driver's, passenger, and center, IF they are
Thanks,
shane

shane this truck has parchment belts

Quote:

Originally Posted by Aarons72s

I am interested in the bushing/ nut that is in the cowl and can be seen under the dash that the pin on the end of the flapper goes into. It is not in the pic so I asome it is still on the cab. If it is still good could I get a pic and price to 73099, pending sneezys72 does not need it also. Thanks

I'll look at it tommorrow and get back to you

Quote:

Originally Posted by KFreddy

I would be interested in the upper and lower body molding, any chance of some close up pics and a full count of whats there?

Thank You

KFreddy I'll check them out

bossrod · 06-04-2007, 07:56 PM

What do you want for the upper/lower a-frames?

Down south truckin · 06-04-2007, 11:12 PM

Quote:

Originally Posted by bossrod

What do you want for the upper/lower a-frames?

whatever is fair.hows $75 for all 4 sound thats mostly for taking them off thanks Mike

bossrod · 06-05-2007, 06:27 AM

Quote:

Originally Posted by Down south truckin

whatever is fair.hows $75 for all 4 sound thats mostly for taking them off thanks Mike

I've got to pass this time, my plans have changed. Thanks anyway, Jim

05-29-2007, 07:41 AM	#1
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: parting out 1972 cheyenne super lwb What do you have left as far as the A/C sutff. Do you have the whole set-up

05-29-2007, 07:46 AM	#3
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb Do you happen to already have the steering column pulled if so can you show some photo's thanks __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

05-29-2007, 06:52 PM	#5
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: parting out 1972 cheyenne super lwb Mike, Is the lower rear trim behind the rear wheels any good (drivers quality)? Thanks, __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

05-29-2007, 09:59 AM	#7
ddp Registered User Join Date: Nov 2006 Location: Chicago IL Posts: 114	Re: parting out 1972 cheyenne super lwb Thanks for the detailed pics of the diverter box but it looks to be about the same condition as my original. I'll pass on the box and "s" duct. Thanks for your time. Don

05-29-2007, 07:36 PM	#8
mcarwile1 Registered User Join Date: May 2007 Location: Amelia, Virginia Posts: 2	Re: parting out 1972 cheyenne super lwb Is the evaporator housing in good shape? I need on for a 72 cheyenne. Thanks

05-29-2007, 11:55 PM	#10
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: parting out 1972 cheyenne super lwb Will you ship on my dime?

05-30-2007, 06:06 AM	#12
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb is the other column a tilt? __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

05-30-2007, 10:14 PM	#14
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: parting out 1972 cheyenne super lwb dennyb the moulding on 2 trucks that i can get to easily are all bent i'll keep looking mcarwile1 here are pics of the evaporator housing i hope this is the part your looking for i did not see any cracks $25 plus shipping i think the p/o pulled the evaporator to sell for scrap metal Attached Images

05-31-2007, 02:52 PM	#15
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb well if you already have someone to repair it then i wouldn't mind paying that extra few just to have a better column __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

06-01-2007, 01:35 PM	#16
AH619 Registered User Join Date: Aug 2006 Location: HARRISON AR. Posts: 309	Re: parting out 1972 cheyenne super lwb ill take the hump if shipping is reasonable 72601 __________________ 72 2wd lwb cheyenne super youngest son.green/white 72 2wd lwb cheyenne super oldest son.green/white 71 4wd 3/4 cheyenne super frame off manderin copper / white 4 inch lift. FINALLY DONE / SOLD 72 4WD SWB CHEYENNE BLUE/WHITE 388 AUTO REMEMBER THE COPS NEVER THINK ITS AS FUNNY AS YOU DO. NORWOOD SURVIVOR COPPERTONE BUILD THREAD/ http://www.67-72chevytrucks.com/vboa...d.php?t=259856

06-01-2007, 05:09 PM	#19
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: parting out 1972 cheyenne super lwb Did that truck have black seat belts? If so, do you still have them? Interested in driver's, passenger, and center, IF they are black. Thanks, shane

06-01-2007, 10:48 PM	#20
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: parting out 1972 cheyenne super lwb I am interested in the bushing/ nut that is in the cowl and can be seen under the dash that the pin on the end of the flapper goes into. It is not in the pic so I asome it is still on the cab. If it is still good could I get a pic and price to 73099, pending sneezys72 does not need it also. Thanks Last edited by Aarons72s; 08-13-2007 at 03:42 AM.

06-01-2007, 11:13 PM	#21
KFreddy Active Member Join Date: Apr 2005 Location: Miami, Florida Posts: 286	Re: parting out 1972 cheyenne super lwb I would be interested in the upper and lower body molding, any chance of some close up pics and a full count of whats there? Thank You __________________ "The Great State of Florida"

06-04-2007, 07:56 PM	#23
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Re: parting out 1972 cheyenne super lwb What do you want for the upper/lower a-frames?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.