Project '86 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dv8customs · 02-09-2009, 07:38 PM

Quote:

Originally Posted by mrenj23

looks real good. I put suicides on my 86 and let me tell ya it takes a lot to get the doors not to sag. Also, are you putting the latch on the door or the jam

My intent was to put it in the door. The kit I bought came with the wrong size latches and I haven't gotten the correct ones back yet so I haven't really planned that part out yet. Do you happen to have any photos of the bracing you added? I still need to put some bracing in the door jamb on the cab so some of it is likely coming from there as well.

mrenj23 · 02-09-2009, 09:24 PM

Here is the best pic i have. I think that the door could prob. use a little more around the bottom hinge but oh well. I was just asking about the latch because if you plan on one piece windows you have to watch out for clearance on the front part of the door. There is only like 1/8th inch clearance. That's why I put my latch on the jam and the pin on the door.

mrenj23 · 02-09-2009, 09:27 PM

sorry here is the pic

dv8customs · 02-09-2009, 09:37 PM

Thanks for the heads up but I am not going to swap to one piece windows. They look nice but are a little pricy.

dv8customs · 02-10-2009, 11:28 AM

Quote:

Originally Posted by mrenj23

sorry here is the pic

How thick is the metal you braced the door with? I have used 16ga for all of mine so far. I know some have used 1/8" but that will be tricky to weld onto the thin door skin.

sswitzke · 02-10-2009, 12:27 PM

Nice looking truck, can't wait to see more pics.

nuke1 · 02-10-2009, 09:34 PM

great start you have on the truck so far, i really like the direction you are going with this build. especially the suicide doors, i really want them on mine, but thewife does not, guess who wins, LOL.

dv8customs · 02-18-2009, 01:10 PM

I have been having problems getting the right latches/install kit from the guys I ordered the kit from. They are supposed to be sending the right parts out today. I hope to be able to finish up the passenger door before the end of the month.

justpball · 02-18-2009, 04:58 PM

looking good bro!

dv8customs · 02-21-2009, 07:45 PM

A buddy had his wheels off so I threw them on to see how it looked.....

dv8customs · 02-21-2009, 07:47 PM

jrsmith_2010 · 02-21-2009, 07:51 PM

i like the wheels

mrenj23 · 02-21-2009, 08:44 PM

man that looks good. Are those 20''s or 22''s?

dv8customs · 02-21-2009, 08:46 PM

22's

smashingchuck · 02-21-2009, 09:20 PM

Looking good. Does it lay flat on the frame or do you still have something hold you up? Can't really tell.

dv8customs · 02-21-2009, 09:44 PM

With the 22's up front it is up about a 1/2". The back would lay the bumper on the ground if it had one but I left jack stands in the back to keep it level. I could cut the lower arms to recess the bag some but then I am not sure I could get enough lift to clear the wheels. I guess I could always try it, and if it doesn't work out just plate it back up.

menace121978 · 02-21-2009, 11:00 PM

damn that is SICK!! keep it going!

mrenj23 · 02-21-2009, 11:14 PM

I gots to get some bigger wheels

cochino12 · 02-21-2009, 11:24 PM

Quote:

Originally Posted by mrenj23

I gots to get some bigger wheels

me too!!

dv8customs, that truck is looking awesome!!

smashingchuck · 02-22-2009, 03:42 AM

Quote:

Originally Posted by dv8customs

With the 22's up front it is up about a 1/2". The back would lay the bumper on the ground if it had one but I left jack stands in the back to keep it level. I could cut the lower arms to recess the bag some but then I am not sure I could get enough lift to clear the wheels. I guess I could always try it, and if it doesn't work out just plate it back up.

I wouldn't worry about it. Laying frame is over rated. Whatever you do I wouldn't let it sit lower in the back when it's laid out.

Primer70 · 02-22-2009, 04:04 AM

Quote:

Originally Posted by smashingchuck

I wouldn't worry about it. Laying frame is over rated. Whatever you do I wouldn't let it sit lower in the back when it's laid out.

Yeah as long as it's body dropped and touching the ground, laying frame is over rated. LOL! Just kidding. I like what you did with the front well opening, think I'll do it on my Suburban.

chevyrestoguy · 02-22-2009, 01:21 PM

I am very impressed with all the mods you have done with your truck. I love the fender trick especially. How difficult was it to raise the bed floor?

I also noticed that all the pictures were taken outside, and it looks like you don't have a garage. If you're doing all of this stuff out in the weather, then you are truly a maniac! Keep posting pictures!!

killthewabbit · 02-22-2009, 02:29 PM

Did you have to change your steering any after the front Z, or have you gotten that far along yet? I've seen threads where people did a mild Z and didn't have to change the steering, but didn't know if 1 7/8" was the magic number or not...

Are your lower rear bars from SD as well?

This is a sweet looking build. I love the fender mods, and totally dig how you kept/raised the rear bed floor.

dv8customs · 02-22-2009, 04:22 PM

Quote:

Originally Posted by chevyrestoguy

I am very impressed with all the mods you have done with your truck. I love the fender trick especially. How difficult was it to raise the bed floor?

I also noticed that all the pictures were taken outside, and it looks like you don't have a garage. If you're doing all of this stuff out in the weather, then you are truly a maniac! Keep posting pictures!!

Raising the bed floor was pretty easy. Just unbolt it, raise it up, and weld it back in. I went ahead and sectioned the rear fenders so they would fit back in and keep the "stock" appearance.

You are right, I don't have a garage so I am at the mercy of the weather.

dv8customs · 02-22-2009, 04:24 PM

Quote:

Originally Posted by killthewabbit

Did you have to change your steering any after the front Z, or have you gotten that far along yet? I've seen threads where people did a mild Z and didn't have to change the steering, but didn't know if 1 7/8" was the magic number or not...

Are your lower rear bars from SD as well?

This is a sweet looking build. I love the fender mods, and totally dig how you kept/raised the rear bed floor.

I haven't gotten to the steering yet. It looks like I may be able to just put a small notch in the upper arm but I don't know for sure yet. The rear set-up is a triangulated 4-link from SD.

02-09-2009, 09:24 PM	#52
mrenj23 Registered User Join Date: Aug 2006 Location: florida Posts: 160	Re: Project '86 Here is the best pic i have. I think that the door could prob. use a little more around the bottom hinge but oh well. I was just asking about the latch because if you plan on one piece windows you have to watch out for clearance on the front part of the door. There is only like 1/8th inch clearance. That's why I put my latch on the jam and the pin on the door. __________________

02-09-2009, 09:27 PM	#53
mrenj23 Registered User Join Date: Aug 2006 Location: florida Posts: 160	Re: Project '86 sorry here is the pic Attached Images __________________

02-09-2009, 09:37 PM	#54
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 Thanks for the heads up but I am not going to swap to one piece windows. They look nice but are a little pricy.

02-10-2009, 12:27 PM	#56
sswitzke Registered User Join Date: Jan 2008 Location: Buffalo, MO Posts: 589	Re: Project '86 Nice looking truck, can't wait to see more pics.

02-10-2009, 09:34 PM	#57
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project '86 great start you have on the truck so far, i really like the direction you are going with this build. especially the suicide doors, i really want them on mine, but thewife does not, guess who wins, LOL. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-18-2009, 01:10 PM	#58
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 I have been having problems getting the right latches/install kit from the guys I ordered the kit from. They are supposed to be sending the right parts out today. I hope to be able to finish up the passenger door before the end of the month.

02-18-2009, 04:58 PM	#59
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: Project '86 looking good bro! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

02-21-2009, 07:45 PM	#60
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 A buddy had his wheels off so I threw them on to see how it looked..... Last edited by dv8customs; 02-21-2009 at 07:48 PM.

02-21-2009, 07:47 PM	#61
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 Last edited by dv8customs; 02-21-2009 at 07:48 PM.

02-21-2009, 07:51 PM	#62
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Project '86 i like the wheels __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

02-21-2009, 08:44 PM	#63
mrenj23 Registered User Join Date: Aug 2006 Location: florida Posts: 160	Re: Project '86 man that looks good. Are those 20''s or 22''s? __________________

02-21-2009, 08:46 PM	#64
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 22's

02-21-2009, 09:20 PM	#65
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Project '86 Looking good. Does it lay flat on the frame or do you still have something hold you up? Can't really tell. __________________ 78 Build Thread 4Runner Build

02-21-2009, 09:44 PM	#66
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 With the 22's up front it is up about a 1/2". The back would lay the bumper on the ground if it had one but I left jack stands in the back to keep it level. I could cut the lower arms to recess the bag some but then I am not sure I could get enough lift to clear the wheels. I guess I could always try it, and if it doesn't work out just plate it back up.

02-21-2009, 11:00 PM	#67
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Project '86 damn that is SICK!! keep it going! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list



Register or Log In To remove these advertisements.

02-21-2009, 11:14 PM	#68
mrenj23 Registered User Join Date: Aug 2006 Location: florida Posts: 160	Re: Project '86 I gots to get some bigger wheels __________________

02-22-2009, 01:21 PM	#72
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Project '86 I am very impressed with all the mods you have done with your truck. I love the fender trick especially. How difficult was it to raise the bed floor? I also noticed that all the pictures were taken outside, and it looks like you don't have a garage. If you're doing all of this stuff out in the weather, then you are truly a maniac! Keep posting pictures!!

02-22-2009, 02:29 PM	#73
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: Project '86 Did you have to change your steering any after the front Z, or have you gotten that far along yet? I've seen threads where people did a mild Z and didn't have to change the steering, but didn't know if 1 7/8" was the magic number or not... Are your lower rear bars from SD as well? This is a sweet looking build. I love the fender mods, and totally dig how you kept/raised the rear bed floor. __________________ -- Will

Register or Log In To remove these advertisements.