60-66 FAQ's

[LostMy65]

Patch Panels:

http://67-72chevytrucks.com/vboard/s...t=patch+panels
http://67-72chevytrucks.com/vboard/s...t=patch+panels
http://67-72chevytrucks.com/vboard/s...t=patch+panels

[k1rodeoboater]

How-to....69 Camaro Tank Retrofit

http://67-72chevytrucks.com/vboard/s...d.php?t=448386

[csa daddy]

6lug to five lug conversion
http://67-72chevytrucks.com/vboard/s...d.php?t=460558

[tomfg]

Would like to see a FAQ on conversion to HEI (ignition) from the old style points and condenser ignition. Thanks.

[Captainfab]

Here you go.....

http://www.67-72chevytrucks.com/vboa...ad.php?t=13698

I found it in the 'Engine and drivetrain' FAQ's

Originally Posted by tomfg

Would like to see a FAQ on conversion to HEI (ignition) from the old style points and condenser ignition. Thanks.

[jonzcustomshop]

http://67-72chevytrucks.com/vboard/s...d.php?t=562544

73-87 bolt in 3/4 ton motor mounts with pics for 60-66

[padresag]

Originally Posted by Woogeroo

check your subscribed threads folks... we are editing/updating the 60-66 FAQ Index...

put your suggestions in here for review and consideration.

Thanks.

-W

Woog perhaps this orig thread of yours that I brought over could have better exposure that being buried in Jon's thread on vin#. needs to easier for these guys to find. if possible
thks
ron

[padresag]

Originally Posted by Woogeroo

jonzcustomshop,

spiffy!

That's the stuff we need.

what section should it go in... Engine I guess?

-W

i forgot to post the link that i was talking about
http://www.bipac.net/page.asp?conten...olbox&g=SEMAGA
ron

[jonzcustomshop]

good info about bumper guards:
http://67-72chevytrucks.com/vboard/s...d.php?t=566285

[jonzcustomshop]

60-66 dual master cylinder drum/drum:


http://67-72chevytrucks.com/vboard/s...d.php?t=487384

[ACK]

I didn't see anything in the FAQ on grounding tail lights and it pops up quite a bit. Here's a link for consideration. I love the FAQ, it's a great resource.

[LostMy65]

Posting Pictures / Photos:
____________________
.
Using Site's Upload Attachment:
http://67-72chevytrucks.com/vboard/s...d.php?t=295313
http://67-72chevytrucks.com/vboard/s...d.php?t=209103
.
.
Using PhotoBucket:
http://67-72chevytrucks.com/vboard/s...ad.php?t=84808
.
.
Reminder:
.
If you post pictures from your photobucket account, don't move them to a different folder in your photobucket account because it will mess up the link.
The address path will change and the link will not work.
I suggest you start with getting your photobucket account organized with folders for pictures then keep your pictures organized in these folders. Then post the img links.
.

[LostMy65]

You may already know this,
But you can link to a particular post and yet open that post within the whole thread rather than just that post.

Over in the projects section you posted a link to section 2B but it doesn't take you directly to 2B.

Here's how you do it:
You first click on the post number.
In your case it would be the number 3 of post #3.
This isolates that single post, which is called "View Single Post" Then in the "View Single Post" mode, click on the thread title. This takes you back to the full thread. Now scroll up to the address bar and copy the address link.
Now when someone clicks on that address link you post in your thread, it takes them to the whole thread, but straight to the post you want to link them to.

I edited your post below to let you see how it works.
Click on Section 2B in the quote below.

Originally Posted by Woogeroo

Howdy projects & build folks...

I'm Woogeroo, a fellow truck nut.

I also happen to be the current Archivist/Editor/Compiler of the 60-66 FAQ Index.

Now,
within the 60-66 FAQ Index thread, listed in Section 2B

I have this section here :


Lowering

Which contain a few threads I've found that deal with lowering our trucks and 'burbs.

...clip...

[Woogeroo]

Howdy folks,

I updated the 60-66 FAQ Index today... if you are new to the forum or haven't checked out the 60-66 FAQ in awhile, review Section 1 for the layout and the outline. Section 1 also has a lot of links to articles about how to do mash buttons and do things here within the forum.

It's been awhile since I updated, but I've been collecting links and adding them to the pile... and had a few folks send me a few links as well. I work on it when I have time and I'm in the mood... it's a lot of editing to make it happen.

The latest...

August 2014

08/04/2014 : added multiple links in all 4 Sections... Body, The Engine Bay, Electrical Threads, Mirrors, Seats & Heaters and others... as well as a few to the Fun! & Historical categories. Added a category, Painting our Trucks to Section 2C and updated and tweaked the 60-66 FAQ Index - Outline in Section 1 in a few places.



Need more threads for these Categories:


Lowering

Manual Steering

Painting our Trucks(stuff related to our 60-66 trucks, like paint schemes, paint codes, etc.. - other painting things are for the paint and body work forum)

Panel Trucks

Suburban Archives


I know some of these threads exist, as I've read some of them over the years... I haven't had much luck in searching tho', must be using the wrong terms or something.

Please check your 'subscribed threads' folders in your User CP or use your favorite search tricks to find 'em for us!

----

Always looking for more information to add to the pile...


A few of the highlights that were added in the latest edit :

Replaced Heater Core thread by ACK

1960 -1966 Deluxe steering wheel assembly : July 2014 by 1963c-10

Original (sorta) 66 "Deluxe" seatcover by rideblue00

MIP Vinyl Full Floor Mat by markbe01

As always, thanks to everyone that contributes to these nifty threads...

happy wrenchin' and boltin' to everyone.

-W

[63 & 64 Bowties]

painting grill letters:
http://67-72chevytrucks.com/vboard/s...d.php?t=642680

[pimpston65]

any threads on which 64-66 chevy wiring harness cross ref. i.e. gmc,camero,vette, impala and the like? im looking to to replace my entire harness and have some problems with trucks but others are out there, any info would help. i hope this thread is where u ask v. giving info for others thks!!!

[1963c-10]

Thanks for all your time spent on the FAQ's Woogeroo. Some great new additions for the forum!!

[60-66]

Originally Posted by pimpston65

any threads on which 64-66 chevy wiring harness cross ref. i.e. gmc,camero,vette, impala and the like? im looking to to replace my entire harness and have some problems with trucks but others are out there, any info would help. i hope this thread is where u ask v. giving info for others thks!!!

Pimpston, trucks are ALL BY THEMSELVES, nothing will interchange, not even GMC to Chevy. Then you have different part numbered harnesses for Gauges VS non Gauge dashes, 3 speed VS auto etc. My buddy Don at American Autowire can build you an exact harness right from original GM blue prints specific to your application. Chances of finding a complete NOS are slim and will take years. He built me a complete 1960 4x4 Suburban harness front to back and several others.

[pimpston65]

Originally Posted by 60-66

Pimpston, trucks are ALL BY THEMSELVES, nothing will interchange, not even GMC to Chevy. Then you have different part numbered harnesses for Gauges VS non Gauge dashes, 3 speed VS auto etc. My buddy Don at American Autowire can build you an exact harness right from original GM blue prints specific to your application. Chances of finding a complete NOS are slim and will take years. He built me a complete 1960 4x4 Suburban harness front to back and several others.

yeah i feared as much :-(. thks bro, i have a few pieces. once i get them all in the mail i will hit em up. guess my NOS pipe dream just pop'd oh well. i just need the AC stuff and L-6 with guages on the engine side with a 4speed. oh are burbans the same as trucks?

[60-66]

If you have time, by all means, the hunt for this stuff is the most fun. But , the new stuff will work fine with the new old to . Most of the burb stuff under the hood will be same as pickup. If you find a harness, get the part number and we can figure that out. I can text Don and get an answer pretty quick to. Is that Burb home yet ?

[Jake1971]

Link to replacing a 3OTT with a TH350 in a truck with a 235 C.I.D. L6 engine

http://67-72chevytrucks.com/vboard/s...d.php?t=643822