75 C20 long bed 2wd - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thirdstreettito · 01-04-2011, 12:07 AM

Where did you get the drop spindles, hangers, and shackles? That trucks looks so good down low. Good job!

bharrison1 · 01-04-2011, 01:44 PM

Thanks!!Well the spindles and hangers came from AIM industries it was kind of an ordeal which is a long story but i got them and they worked out great i am very happy with it!!

bharrison1 · 01-14-2011, 10:38 PM

Got my sway bar brackets and bushings from Classic Industries not too exciting but heres a pic

WillieloRidez · 01-19-2011, 09:16 PM

Lookin good man! Plenty of ground clearence as well

bharrison1 · 01-22-2011, 03:12 AM

got some shorter rear shocks they are Gabriel part #82007

bharrison1 · 01-22-2011, 02:39 PM

i may need a frame notch after all once i got the longer stock skocks off it dropped some more in the rear .the longer ones were holdoing it up cuz they were bottomed out

bharrison1 · 01-23-2011, 12:26 AM

new front shocks gabriel part#61525

WillieloRidez · 01-23-2011, 11:55 AM

Looks like its going to need a knotch to me man

bharrison1 · 05-20-2011, 09:29 PM

no update just a new pic

bharrison1 · 07-15-2011, 12:41 PM

My transmission is shot no reverse so its just sitting til i decide what to do with it motor is about done too so long term i would like to put an LS motor in it

WillieloRidez · 07-16-2011, 08:34 AM

turbo 400?

bharrison1 · 07-16-2011, 10:30 AM

Turbo 350

WillieloRidez · 02-20-2012, 11:00 AM

Any progress????

79 blue monster · 04-17-2012, 11:27 PM

Quote:

Originally Posted by bharrison1

ok so apparently im a ra-tard all i had to do was bend the brake lie a little and the caliper fit just fine ha ha

hahaha, i did the same thing! i felt dumb when i relized the brake line was hitting. We need some updates! i have some questions for you about my 3/4ton build!

bharrison1 · 04-18-2012, 08:53 PM

not much of an update i started tearin it all down to pull the motor and transmission its gonna be a long time before it sees the road again im gonna do an LS swap

79 blue monster · 04-18-2012, 09:26 PM

nice! how much offset are your wheels? i have a 5/7 drop and am told that if im running a 10in in back, i need 5in back spacing, and if im running 8.5 in front, i need 5 1/4in backspacing. do you have rubbing issues?

bharrison1 · 04-18-2012, 11:08 PM

mine dont rub at all i bought them used so i dont know the offset ill pull one off and measure it and let ya know

79 blue monster · 04-18-2012, 11:21 PM

Quote:

Originally Posted by bharrison1

mine dont rub at all i bought them used so i dont know the offset ill pull one off and measure it and let ya know

ok thanks, let me know!

bharrison1 · 06-19-2012, 11:14 PM

this is how it sits now

bharrison1 · 06-19-2012, 11:15 PM

oh and i had this done awhile back

WillieloRidez · 06-25-2012, 02:36 PM

Quote:

Originally Posted by bharrison1

oh and i had this done awhile back

I like it man i have never seen that before!

bharrison1 · 06-25-2012, 05:28 PM

Thanks!

bharrison1 · 07-17-2012, 10:34 PM

Traded my 20s for some 8 lug steelies and a 5.3!!

79 blue monster · 07-18-2012, 08:55 PM

nice! looking forward to updates

bharrison1 · 07-19-2012, 10:10 PM

this is the motor its from a 99 silverado

01-04-2011, 12:07 AM	#51
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 75 C20 long bed 2wd Where did you get the drop spindles, hangers, and shackles? That trucks looks so good down low. Good job! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-04-2011, 01:44 PM	#52
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Thanks!!Well the spindles and hangers came from AIM industries it was kind of an ordeal which is a long story but i got them and they worked out great i am very happy with it!!

01-14-2011, 10:38 PM	#53
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Got my sway bar brackets and bushings from Classic Industries not too exciting but heres a pic Attached Images

01-19-2011, 09:16 PM	#54
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd Lookin good man! Plenty of ground clearence as well __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

01-22-2011, 03:12 AM	#55
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd got some shorter rear shocks they are Gabriel part #82007 Attached Images

01-22-2011, 02:39 PM	#56
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd i may need a frame notch after all once i got the longer stock skocks off it dropped some more in the rear .the longer ones were holdoing it up cuz they were bottomed out Attached Images

01-23-2011, 12:26 AM	#57
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd new front shocks gabriel part#61525 Attached Images

01-23-2011, 11:55 AM	#58
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd Looks like its going to need a knotch to me man __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

05-20-2011, 09:29 PM	#59
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd no update just a new pic Attached Images

07-15-2011, 12:41 PM	#60
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd My transmission is shot no reverse so its just sitting til i decide what to do with it motor is about done too so long term i would like to put an LS motor in it

07-16-2011, 08:34 AM	#61
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd turbo 400? __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

07-16-2011, 10:30 AM	#62
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Turbo 350

02-20-2012, 11:00 AM	#63
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd Any progress???? __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

04-18-2012, 08:53 PM	#65
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd not much of an update i started tearin it all down to pull the motor and transmission its gonna be a long time before it sees the road again im gonna do an LS swap Attached Images

04-18-2012, 09:26 PM	#66
79 blue monster Registered User Join Date: Feb 2012 Location: Pulaski, Wi Posts: 491	Re: 75 C20 long bed 2wd nice! how much offset are your wheels? i have a 5/7 drop and am told that if im running a 10in in back, i need 5in back spacing, and if im running 8.5 in front, i need 5 1/4in backspacing. do you have rubbing issues? __________________ 1979 GMC 3/4 ton camper special 454 (7/8in drop) UPDATE: CADDILAC 500 SWAP AND 4X4 SWAP http://67-72chevytrucks.com/vboard/s...d.php?t=518625 1965 gmc 4x4 build : http://67-72chevytrucks.com/vboard/s...d.php?t=724972



Register or Log In To remove these advertisements.

04-18-2012, 11:08 PM	#67
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd mine dont rub at all i bought them used so i dont know the offset ill pull one off and measure it and let ya know

06-19-2012, 11:14 PM	#69
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd this is how it sits now Attached Images

06-19-2012, 11:15 PM	#70
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd oh and i had this done awhile back Attached Images

06-25-2012, 05:28 PM	#72
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Thanks!

07-17-2012, 10:34 PM	#73
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Traded my 20s for some 8 lug steelies and a 5.3!!

07-18-2012, 08:55 PM	#74
79 blue monster Registered User Join Date: Feb 2012 Location: Pulaski, Wi Posts: 491	Re: 75 C20 long bed 2wd nice! looking forward to updates __________________ 1979 GMC 3/4 ton camper special 454 (7/8in drop) UPDATE: CADDILAC 500 SWAP AND 4X4 SWAP http://67-72chevytrucks.com/vboard/s...d.php?t=518625 1965 gmc 4x4 build : http://67-72chevytrucks.com/vboard/s...d.php?t=724972

07-19-2012, 10:10 PM	#75
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd this is the motor its from a 99 silverado Attached Images

Register or Log In To remove these advertisements.