KS Parting 71 BB burb - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-18-2010, 09:31 PM

1) all lower chrome, driver quality, a few screw holes and some dings $50 plus shipping
2) heater
3) all 3 door edge guards $20 plus shipping
4) tinted wings $60 plus shipping
5) front door panel chrome

teeitup · 04-18-2010, 09:32 PM

1) inner grill is nice, outer has a few dings but still good $125
2) visors are good $25 plus shipping
3) mirror is good $25 shipped

teeitup · 04-18-2010, 09:33 PM

kkkfjhgkh

**lolife99** · 04-18-2010, 10:23 PM

Quote:

Originally Posted by teeitup

Keith, I'll try to get a ratio soon on it. I'm trying to keep up but not having much luck. I know I won't be able to have thie rearend out before Lawrence swap meet, sorry. Thanks Randy

No big deal Randy.
If I want it,... I'll make a trip to your place.

*67/72junkie* · 04-18-2010, 10:23 PM

Randy how much for the bb bucket seat brace under the floor and the under floor supports for the buckets?I would like to have them if you feel like drilling out a few spot welds.Thanks

teeitup · 04-19-2010, 08:50 AM

Junkie, I take them out I usually just cut the floor board and all on the front one. I get $100 plus shipping for the set. Thanks Randy

sierragrande71 · 04-19-2010, 10:42 AM

Teeitup, you are correct I do need all the brackets to bolt the seat down to floorboard. My seat (I just found out last night) does have the black tube brackets. So I won't be needing those, I do want the armrests and seatbelts and the bolts to secure them in place. Basically I have a second seat in my suburban to flies around in the back with no brackets, armrests or seatbelts. LOL. Thanks.

71meangreenc10 · 04-19-2010, 11:21 AM

Randy,

How much for a complete reverse light assy? Shipped to 28314.

Thanks

Smitty

teeitup · 04-19-2010, 08:25 PM

sierragrande71, Pm'd you
71meangreen, the pass side housing is missing the socket. Wiring is bad. I can get a pic
Junkie, here are some pics, which ones of the back ones are you wanting

teeitup · 04-19-2010, 08:25 PM

1) pass side outer rear
2) driver side outer rear

*67/72junkie* · 04-19-2010, 08:52 PM

The front is good as is and I need the inner and outer rear on both sides.I don't need the fartherest rear on each side with the phillips head screws as they are the factory bench holes.I would like the 4 screws if they will come out without a hassel to plug mine.Thanks I sent pm with shipping address

RickBost · 04-19-2010, 08:57 PM

is the hatch still for sale?

teeitup · 04-19-2010, 10:02 PM

Junkie, I'll try to get them cut out Tues and get you a quote hopefully but it may be Wed evening
Rickbost, yes it is but shipping to you would be high. I priced it shipping to La and it was $90 through fed ex. But if you want me to get you a quote I will.
Thanks Randy

teeitup · 04-19-2010, 10:03 PM

pics for Sean

sierragrande71 · 04-19-2010, 11:36 PM

Just pm'd you randy.

teeitup · 04-20-2010, 07:07 PM

Junkie, got them cut off. I think I may of cut the 2 inner rear ones just a little bit short. I'll get quote tonight hopefully. Thanks Randy

badpeanut · 04-20-2010, 08:32 PM

Quote:

Originally Posted by teeitup

2) heater

I'm interested. Does it require 12V supply and a ground? Does it work? How much?

teeitup · 04-20-2010, 09:30 PM

Wes, the fan was working when I pulled the burb into the yard, it had a wire going to fuse box and a knob on the left side of the dash bezel that you turn, they drilled a hole and put switch though. it take 2 hoses that come in from bottom, I had to cut them so you'd need hoses. I can get a pic of where it was installed. I got it completely taken out tonight. $40 plus shipping for it. Thanks Randy

teeitup · 04-20-2010, 09:52 PM

more parts

teeitup · 04-20-2010, 09:53 PM

more yet

badpeanut · 04-20-2010, 11:05 PM

Quote:

Originally Posted by teeitup

Wes, the fan was working when I pulled the burb into the yard, it had a wire going to fuse box and a knob on the left side of the dash bezel that you turn, they drilled a hole and put switch though. it take 2 hoses that come in from bottom, I had to cut them so you'd need hoses. I can get a pic of where it was installed. I got it completely taken out tonight. $40 plus shipping for it. Thanks Randy

So it uses engine coolant and ties into the heater hoses? Do you have the tees? If it is just regular heater hose the cut hoses are a non-issue.

teeitup · 04-20-2010, 11:28 PM

yes it uses the engine coolant, and yes its just regular heater hose, I'll throw in the tees. I'll get pics of tees and where thw switch goes Wed evening. Thanks Randy

sierragrande71 · 04-21-2010, 10:42 AM

Pm'd you Randy. Thanks.

71meangreenc10 · 04-21-2010, 04:09 PM

Ill pass.

Thanks Randy

Smitty

Dennis Brusenski · 04-21-2010, 09:00 PM

Randy, If you get no takers on the Ac and willing to ship- I need the plastic to finish my burb- I know it's a hasle thanks

04-18-2010, 09:31 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb 1) all lower chrome, driver quality, a few screw holes and some dings $50 plus shipping 2) heater 3) all 3 door edge guards $20 plus shipping 4) tinted wings $60 plus shipping 5) front door panel chrome Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-18-2010 at 09:41 PM.

04-18-2010, 09:32 PM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb 1) inner grill is nice, outer has a few dings but still good $125 2) visors are good $25 plus shipping 3) mirror is good $25 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-18-2010 at 09:43 PM.

04-18-2010, 09:33 PM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb kkkfjhgkh Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-18-2010, 10:23 PM	#55
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Parting 71 BB burb Randy how much for the bb bucket seat brace under the floor and the under floor supports for the buckets?I would like to have them if you feel like drilling out a few spot welds.Thanks

04-19-2010, 08:50 AM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb Junkie, I take them out I usually just cut the floor board and all on the front one. I get $100 plus shipping for the set. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2010, 10:42 AM	#57
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: Parting 71 BB burb Teeitup, you are correct I do need all the brackets to bolt the seat down to floorboard. My seat (I just found out last night) does have the black tube brackets. So I won't be needing those, I do want the armrests and seatbelts and the bolts to secure them in place. Basically I have a second seat in my suburban to flies around in the back with no brackets, armrests or seatbelts. LOL. Thanks.

04-19-2010, 11:21 AM	#58
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Parting 71 BB burb Randy, How much for a complete reverse light assy? Shipped to 28314. Thanks Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

04-19-2010, 08:25 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb sierragrande71, Pm'd you 71meangreen, the pass side housing is missing the socket. Wiring is bad. I can get a pic Junkie, here are some pics, which ones of the back ones are you wanting Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2010, 08:25 PM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb 1) pass side outer rear 2) driver side outer rear Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-19-2010 at 08:26 PM.

04-19-2010, 08:52 PM	#61
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Parting 71 BB burb The front is good as is and I need the inner and outer rear on both sides.I don't need the fartherest rear on each side with the phillips head screws as they are the factory bench holes.I would like the 4 screws if they will come out without a hassel to plug mine.Thanks I sent pm with shipping address

04-19-2010, 08:57 PM	#62
RickBost Registered User Join Date: Apr 2010 Location: Sumas WA Posts: 92	Re: Parting 71 BB burb is the hatch still for sale? __________________ 72 GMC Jimmy 8" lift 38" super swampers 77 GMC C15 High Seirra Short Step lowered 6/8 http://67-72chevytrucks.com/vboard/s...53#post8999053 1972 Plymouth Roadrunner 2005 Cadillac Escalade 2014 Ram Ecodiesel

04-19-2010, 10:02 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb Junkie, I'll try to get them cut out Tues and get you a quote hopefully but it may be Wed evening Rickbost, yes it is but shipping to you would be high. I priced it shipping to La and it was $90 through fed ex. But if you want me to get you a quote I will. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-19-2010 at 10:04 PM.

04-19-2010, 10:03 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb pics for Sean Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2010, 11:36 PM	#65
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: Parting 71 BB burb Just pm'd you randy.

04-20-2010, 07:07 PM	#66
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb Junkie, got them cut off. I think I may of cut the 2 inner rear ones just a little bit short. I'll get quote tonight hopefully. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-20-2010, 09:30 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb Wes, the fan was working when I pulled the burb into the yard, it had a wire going to fuse box and a knob on the left side of the dash bezel that you turn, they drilled a hole and put switch though. it take 2 hoses that come in from bottom, I had to cut them so you'd need hoses. I can get a pic of where it was installed. I got it completely taken out tonight. $40 plus shipping for it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-20-2010, 09:52 PM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb more parts Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-20-2010, 09:53 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb more yet Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-20-2010, 11:28 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 71 BB burb yes it uses the engine coolant, and yes its just regular heater hose, I'll throw in the tees. I'll get pics of tees and where thw switch goes Wed evening. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-21-2010, 10:42 AM	#73
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: Parting 71 BB burb Pm'd you Randy. Thanks.

04-21-2010, 04:09 PM	#74
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Parting 71 BB burb Ill pass. Thanks Randy Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

04-21-2010, 09:00 PM	#75
Dennis Brusenski DB6370 Join Date: Jan 2009 Location: Livingston Ca Posts: 21	Re: Parting 71 BB burb Randy, If you get no takers on the Ac and willing to ship- I need the plastic to finish my burb- I know it's a hasle thanks

Register or Log In To remove these advertisements.